Question about Cars & Trucks
Torque setting for the head bolts
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.
Posted on Aug 15, 2008
joyce, there are different specs for sohc and dohc engines. my advice is to get a Haynes manual from the auto parts store.
Posted on Sep 01, 2008
SOURCE: Angle Torque settings head bolts
Use new bolts, tighten in the following stages
3. wait 3 mins
4. slacken bolts 1&2 retighten to 20Nm +110 degrees
5. carry out stage 4 for bolts 3,4,5 & 6
then bolts 7,8,9 &10
8 4 1 5 9
7 3 2 6 10
Bolts 9 & 10 are flywheel side of the engine.
Posted on Mar 17, 2009
Tips for a great answer:
Jan 14, 2017 | Isuzu Cars & Trucks
Dec 03, 2016 | Isuzu Cars & Trucks
Dec 01, 2016 | Isuzu Cars & Trucks
Jan 22, 2016 | Isuzu Pickup Cars & Trucks
Jun 26, 2015 | Isuzu Cars & Trucks
Feb 25, 2015 | Isuzu Cars & Trucks
Sep 26, 2014 | 1996 Isuzu Rodeo
Jan 15, 2013 | 1990 Isuzu Spacecab
Fig.: Cylinder head bolt torque sequence-2.2L engine
Apply a coating of 1052080 or equivalent sealer to the cylinder head bolt threads. Install the cylinder head bolts (within 15 minutes of sealer application), then tighten them in the proper sequence first to a torque of 46 ft. lbs. (63 Nm) for long bolts or to 43 ft. lbs. (58 Nm) for short bolts and then tighten all bolts an additional 90 degree turn using a torque angle meter.
Hope this helps (remember to rate this answer).
Jan 25, 2011 | 1996 Isuzu Hombre
Dec 21, 2010 | 1996 Isuzu Trooper
239 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: