Question about Cars & Trucks
Need to know where the fuel pump is located on a D21 89 dual cab 2.4L petrol navara
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It should be a matter of removing the wheel, the caliper and torque
member to get the rotor to come off. There are two bolts that hold the
caliper on the torque member and then another two that hold the torque
member on the spindle hub. Now, the rotor comes off the wheel studs
and you should be there.
Let me know if you need further help. If you need a diagram, I would suggest buying a Haynes Manual from a local NAPA, Autozone, or Checker, or even a Fleet Farm and those will have complete instructions and diagrams for everything on the vehicle and are a great thing to have for every vehicle that you own.
If you have any other questions, please let me know, thanks.
Posted on May 17, 2008
SOURCE: fuel filter/pump
To my knowledge, both are integrated in a single unit together with the fuel level sending unit, the float and a return motor. They are in a coffee-can sized assembly inside the fuel tank removal from the top. The big job is bringing the fuel tank down.
A temporary workaround on stuck pump is to bang on the bottom of the fuel tank with the ignition switch ON.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards. Thank you for using FixYa.
Posted on Aug 14, 2008
sounds l;ike you have a skinned wire somewhere you need to find wire and repair or replace it is touching frame somewhere and grounding system out
Posted on Apr 01, 2009
Ford is the only vehicles that use an inertia/fuel pump reset switch not chevy. Should be a jumper wire close to the battery that is hanging loose. This is to be connected up to the positive post on battery and will let you hear your pump run if you loosen your gas cap. May have to search sometimes they are taped or hidden but if electric fuel pump is in vehicle, it is surely there.
Posted on Apr 10, 2009
Tips for a great answer:
Mar 09, 2014 | Cars & Trucks
Jan 12, 2013 | 1988 Nissan Pulsar
Jul 26, 2012 | Cars & Trucks
Jun 25, 2012 | 1987 Nissan Pickup
Dec 01, 2010 | 1986 Nissan Pickup 4WD 1986
Oct 01, 2010 | 1993 Acura Legend
Mar 26, 2010 | 1987 Nissan Pickup
Feb 19, 2010 | 2006 Nissan Pathfinder
48 people viewed this question
Usually answered in minutes!