Question about Cars & Trucks

Open Question

Head bolt torque on 05 kx250f - Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: what is the 98 isuzu rodeo head bolt torque

joyce, there are different specs for sohc and dohc engines. my advice is to get a Haynes manual from the auto parts store.

doug

Posted on Sep 01, 2008

Ad
the terrier
  • 94 Answers

SOURCE: head bolts torque settings

according to the manual its 22NM or 16lb/ft

Posted on Oct 26, 2008

  • 1 Answer

SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine

Head Bolts
Step one 37 ft lbs then tignten 120 degrees more

Rocker arms
Step one 11 ft lbs then tighten 90 degresss more

Upper intake
89 inch lbs
Lower intake
132 inch lbs

Posted on Dec 02, 2008

  • 512 Answers

SOURCE: Head Bolt Torque for a 2000 Grand Cherokee Laredo 4.0L

the torque is a 4 step process

1 torque all bolts to 22 ft/lbs
2 torque all bolts to 45 ft/lbs
3 recheck all bolts to 45 ft/lbs
4 torque bolts 1 thru 10 to 110 ft/lbs
bolt 11 to 100 ft/lbs
bolts 12 thru 14 to 110 ft/lbs
bolt #1 is the fourth bolt from the front on the passenger side....#2 is the fourth bolt on the drivers side then you continue in a clockwise order

Posted on Jan 04, 2009

  • 4 Answers

SOURCE: head bolts torque settings

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Please can anyone help need torque setting's for my cylinder head on my clio 1.4 16v 2004 & order too tighten down


they are stretch bolts and can only be used once. If you try re-using the old bolts they are likely to break or fail to apply enough pressure smile.gif Torques and the order are listed here.

http://ww2.justanswer.com/uploads/nabilc/2011-04-11_205136_cas.pdf

Apr 09, 2016 | Cars & Trucks

2 Answers

Where can I find a diagram for head bolt for 05 Focus


If all else fails, start at the center and use criss-cross pattern working from center out. Be sure if these are one time use bolts to replace them, and find correct torque specs from shop manual or dealer.

Dec 10, 2014 | 2005 Ford Focus

2 Answers

Head bolt torque spec 05 bmw 4.4l


  1. Cylinder Head - AutoZone

    www.autozone.com/.../BMW-X5...05/.../Cylinder-Head/_/P-09...

    AutoZoneBMW X5 2000-05 .... Cylinder head bolt tightening sequence-4.4L & 4.6L engines. To install: ... Torque the bolts in thesequence illustrated in 3 steps as follows:.

Oct 17, 2014 | Cars & Trucks

1 Answer

Head bolt torque spec 05 bmw x5 4.4l


  1. Cylinder Head - AutoZone

    www.autozone.com/.../BMW-X5...05/.../Cylinder-Head/_/P-09...

    AutoZoneBMW X5 2000-05 .... Cylinder head bolt tightening sequence-4.4L & 4.6L engines. To install: ... Torque the bolts in thesequence illustrated in 3 steps as follows:.

Oct 17, 2014 | Cars & Trucks

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

1 Answer

Head bolt torque & sequence for 05 diesel ford courier


The head bolts should be torqued to 90lbs. 2.5 Diesel....correct?

Sep 12, 2012 | Cars & Trucks

1 Answer

What is the cyl head torque setting for 05 vw golf 1.4 fsi 16v


Cylinder head instructions

tdisline_358.jpg
Cylinder head torque setting for 2005 VW Golf 1.4 FSI
Renew bolts
Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

Mar 23, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

Looking for head bolt troque spec for 3.4l impala sfi04


Please don't forget to rate. Thank you:

Left side front cylinder head


98e175a.gif
Cylinder head bolt torque sequence-3.4L engine

  • Cylinder head by aligning it with the dowel pins
  • New cylinder head bolts coated with a sealant (such as GM 1052080). Torque the bolts in the proper sequence (1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence.
  • Left side exhaust manifold. Torque the bolts to 12 ft. lbs. (16 Nm).
  • Spark plugs. Torque the plugs 11 ft. lbs. (15 Nm).


  • Right side rear cylinder head:


    71cd5b7.gif
    Cylinder head bolt torque sequence-3.4L engine


  • New cylinder head gasket
  • Cylinder head on top of the gasket and make certain it is lined up properly with the dowel pins
  • New cylinder head bolts coated with a sealant (such as GM 1052080). Torque the bolts in the proper sequence (1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence.
  • Right side exhaust manifold. Torque the bolts to 12 ft. lbs. (16 Nm).
  • Spark plugs. Torque the plugs 11 ft. lbs. (15 Nm).
  • Spark plug wires
  • Exhaust crossover pipe. Torque the fastener to 18 ft. lbs. (25 Nm).
  • Valve rocker arms and pushrods. Torque the fastener to 89 inch lbs. (10 Nm). Using a torque angle meter torque the fastener an additional 30 degrees.
  • Lower intake manifold. Torque the bolts to 115 inch lbs. (13 Nm).
  • Upper intake manifold. Torque the bolts to 18 ft. lbs. (25 Nm).
  • Nov 26, 2010 | 2004 Chevrolet Impala

    2 Answers

    Torque specification on a 2003 alero cylinder heads 3.4 liter


    3.4L Engine To Remove:
    1. Remove the lower intake manifold.
    2. Remove the exhaust crossover pipe.
    3. If removing the right cylinder head, remove the catalytic converter from exhaust manifold.
    4. If removing the left cylinder head, remove the engine oil dipstick and tube.
    5. Remove the rocker arms and pushrods.
    6. Remove and discard the cylinder head bolts.
    7. Remove the cylinder head.
    8. Clean the mating surfaces on the following items:
      • Cylinder head
      • Cylinder block
      • Intake manifold
    9. Clean the cylinder block bolt threads.
    NOTE: During disassembly, keep the valve train components together for proper location during assembly.
    To Install:
    NOTE: Coat the cylinder head bolt threads using thread sealer.
    1. If removed, install the following components:
      • Exhaust manifold
      • Accessory studs
      • Spark plugs
    2. Place the cylinder head gasket in position over the dowel pins. Ensure that the THIS SIDE UP note is showing.
    3. Install the cylinder head. Cylinder head torque sequence ’99-‘00 gmpc_v6_14.gif

      Cylinder head torque sequence ’01-05 gm-03-34-682.gif

    4. Install the new cylinder head bolts.
      • Tighten the cylinder head bolts a first pass to 44 ft lb (60 Nm).
    5. Tighten the cylinder head bolts in sequence an additional 95 degrees.
    6. Install the intake gasket.
    7. Install the pushrods and rocker arms.
    8. Raise and support the vehicle.
    9. Install the catalytic converter and dipstick tube and indicator if removed.
    10. Lower the vehicle.
    11. Install the exhaust crossover pipe.
    12. Install the intake manifolds.
    13. Connect negative battery cable.
    14. Fill the cooling system.

    Jul 03, 2010 | 2003 Oldsmobile Alero

    1 Answer

    Cyl head torque on 05 3.4l chev equinox


    ① Step 1: 44 ft. lbs. Step 2: plus 95 degrees

    Driver's side head--

    1b89d93.gif

    Install the NEW cylinder head bolts. Tighten the bolts as follows:
    • Tighten the bolts in sequence to 44 ft. lbs. (60 Nm).
    • Turn the bolts in sequence an additional 95 degrees.

    Oct 31, 2009 | 1999 Chevrolet Lumina

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    157 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...