Question about Cars & Trucks

Open Question

MANUAL FOR KIDCO G32A GATE - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear lift gate on 2011 Yukon only works with key fob. Friend mistakenly pushed down manually instead of pushing close button on rear lift gate . How can we fix it?


When the gate was used manually the inside button was deactivated. Look in owners manual or contact dealer to see how to activate switch.

Jun 09, 2017 | Cars & Trucks

1 Answer

I have 2005 chevy tahoe my doors all licks but my liftgate door with window stays open use to lock w all my doors? I havent check anytjing yet? I cant lock it.


Here is how it works !
Liftgate Locking Operation
The lift gate will lock any time the vehicle is shifted out of park on vehicles equipped with an automatic transmission and at vehicle speeds exceeding 5 kph with manual transmission. This happens in conjunction with auto door locks if enabled or independently of auto door locks if the feature is disabled. This ensures that the lift gate is locked anytime the vehicle is shifted out of park or when the vehicle is in motion.
The lift gate lock relay supply and coil sides receive a constant voltage through the battery voltage supply circuit and the ECC fuse. The normally closed contact is connected to ground and the control side is connected to the body control module (BCM). A lock function will occur when a door lock switch activation, keyless entry lock transmission, auto door lock function or a lift gate lock function has been received by the BCM. The BCM will then ground the control side of the lift gate lock relay. This energizes the relay and allows voltage to be applied to the lift gate lock actuator lock control circuit. Since the other side of the lift gate lock actuator is connected to the normally closed contacts of the door unlock relay to ground, the lift gate will lock. When an unlock function occurs the BCM will ground the control side of the unlock relay and the rear doors and lift gate will unlock.
The BCM also runs diagnostics on the lift gate lock relay control circuit and will set DTC B3825 as current and also send a Class 2 message to the DIC. The DIC will display REPLACE LIFTGATE FUSE to inform the driver that a fault has been detected in the lift gate lock circuit and that the lift gate is not locked. Faults that will set the DTC and cause the DIC to display the message could be any of the following:
?€¢
An open ECC fuse


?€¢
An open or short to ground in the lift gate lock relay battery positive voltage circuit


?€¢
A faulty lift gate lock relay


?€¢
An open or short to ground in the lift gate lock relay control circuit


?€¢
A short to ground in the lift gate lock actuator lock control circuit


?€¢
A faulty BCM

May 14, 2016 | Cars & Trucks

1 Answer

2009 caravan manual liftgate is down and latched but "gate" warning light on and interior lights stay on and will kill the battery. Where is the problem?


The lift gate activates a contact. This contact must be integrated in the frame of the lift gate. The contact does not switch.
Either it has to be adjusted (mechanical in right position) or it is defective, then you have to replace it.
Regards Mike (Germany)

Nov 20, 2014 | Cars & Trucks

1 Answer

Rear tail gate opens then closes again by it self


obviously a problem with the auto mechanism , is there a sensor located , see your owners manual, in a particular area that has to bee kept clear and you may have inadvertantly placed something over the sensor , just guess as something must be telling the tailgate to shut , with the age of vehicle is it still covered under makers warrenty ? i'll look into the sensor thing

May 25, 2014 | 2011 Ford Edge

1 Answer

You can hear my gate motor working, but the gate does not open or close. you can open and close the gate by hand. it is as if the gear does not engage


Your manual override is active. This disengages the gearbox from running the gate. You will need to release the manual override. What make and model gate motor is it?

Apr 03, 2012 | Cars & Trucks

1 Answer

Liftgate Release Not Working on a 2000 GMC Jimmy


plug on inside panel of lift gate remove plug and use screwdriver to push on release use light in plug hole

Sep 08, 2017 | 2000 GMC Jimmy

1 Answer

2008 Chrysler Aspen; the power gate will not open using any of (1) manual handle; (2) button in cabin; or (3) remote button. Two beeps are heard when any of the above are attempted however the gate will...


sounds like maybe the motor,wiring or a belt if it belt driven, some are and some are all mechaincal' also first thing is to check linkage on lock on that gate. hope this helps.

Oct 12, 2009 | 2008 Chrysler Aspen

1 Answer

Rear window and gate will not open.


This is only part of a solution or suggestion. I have the same problem and the car manual says to reach under the tail gate, inside under the carpet and there is an emergency release. I can't find it. It says you need a screw driver or sharp skinny object to do this. Good luck hope you find it. Hope you have your manual.

Jul 02, 2008 | 2002 Chevrolet Blazer

3 Answers

Lift gate latch of 2003 Ford Escape


I just want to know if there is any manual to disarm the lift gate and check for the problem. Currently my door is lock and cant open, how you force it to open?

Jun 19, 2008 | 2003 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...