Question about 1992 Honda Accord
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Main Relay on 92 Honda Accord
On you Honda Accord the main relay is located.
On left side of dash, under the Instrument Panel. Left side of the Steering Column.
To get axces You will need to Remove the Cruise Control Module. That is attached with 2, 10mm screws. one on the Steering column, the other one at the dash braket.
after you remove the cruise control module, you will see a Little Box Gray colour, Is a Relay more biger than a Regular Relay.
The NUMBER on the RELAY is : RZ0088.
OK.. I hope this help on your question.
Thank you for use fixya.
Posted on Aug 16, 2008
There is no no camber or caster adjustment on that model. If the car has been in an accident, chances are something is bent. My experience has been that the shock body and/or the steering knuckle is bent. Parts replacement is the only true fix. If the vehicle has had the ride height altered, ie. lowering springs, then there are adjustable upper control arms and ball joints available. These do generally only address the camber angle, not caster, which can also greatly affect handling. hope this helps.
Posted on Oct 21, 2008
It's under the carpet on the passenger's side floor board. There's two boxes under the access panel, I think the TCM is the one on the right? If your's is broken there are probably a couple of capacitors and a resistor that are fried and need to be replaced.
Posted on Oct 21, 2008
Hey, here's the procedure, disable air bag, if equipped w/ one, disconnect the pump return hose from the reservoir and place the end in a large container. Plug the port in the reservoir. Start the engine and turn the steering wheel lock to lock several times, until fluid stops running from the hose. Turn off engine immediately. Re-attach hose. Disconnect the inlet and outlet hoses at the pump. Remove the drive belt. Remove the mounting bolts/nuts and remove pump.
Install in reverse order. Adjust belt tension,fill ps reservoir and bleed any air from the system (to bleed air from system, fill reservoir, start engine and allow to idle, turn wheel from side to side all the way several times. Shut off, fill if necessary.
. Tighten bolts to : Thru bolt 30 ft lbs., mounting nut 16 ft lbs.
Posted on Dec 30, 2008
Tips for a great answer:
Jan 05, 2015 | 2002 GMC Yukon XL
Jan 05, 2011 | 1992 Honda Accord
Mar 09, 2010 | 1992 Honda Accord
Dec 11, 2009 | 1992 Honda Accord
Jun 24, 2009 | 1993 Honda Accord
May 29, 2009 | 1992 Honda Accord
Apr 01, 2009 | 1992 Honda Accord
Mar 03, 2009 | 1999 Honda Accord
123 people viewed this question
Usually answered in minutes!