Question about 2004 Chevrolet TrailBlazer

1 Answer

Engine not firing after replacing cylinder head

Posted by on

  • clint nelson Feb 29, 2012

    had vehicle taken to dealership they flashed computer and found some crossed wires now its runable but has lost oil pressure

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 987 Answers

Change the crank/cam sensor and it will work.

Posted on Feb 25, 2012

Testimonial: "the cam/crank are new which this is the first thing that should be checked i should have noted that i had already changed these on my posting"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota


I think you have burnt valve seat or head gasket either cylinder head has to be removed

Nov 23, 2013 | Cars & Trucks

2 Answers

1.8l 4 cylinder wont fire after replacing head cylinder?


rechk plugs firing order. chk soliniod and coil r ok, rechk fuel is getting into engine- choking usually determines that, u can smell the over choked engine. I f engine turning & choked hold throtel to floor while cranking and leave there until it fires. if no firing happends it must be electrical. rechk electrical connections. Cheers

Aug 29, 2012 | Cars & Trucks

1 Answer

Audi a4 1.8t random miss fire


Check out the AboutAutomobile.com site for NHTSA complaints. I believe there was a defect in the cylinder heads for this engine. The redesigned heads have a different suffix letter than the stock heads.

For a time, the Manufactuer was paying for the repair.

Jul 02, 2012 | Audi A4 Cars & Trucks

1 Answer

5.3 liter Chevy engine #1 Cylinder not firing at idle


My opinion...

Year? Miles?

There's no way I'd dive into a "HEAD GASKET"
diagnosis without pressure testing the cooling
system and (wet/dry) COMPRESSION testing
the whole engine...

Even if it is a "HEAD GASKET"... the entire engine
might be ready for a REFRESH... and tossing a new
Head gasket into a TIRED ENGINE not insubstantial
(a lot of wasted time & money)...

Come back with some compression numbers...

but don't bother with any of this if your engine oil has water in it.

(in my opinion)

Carnac the Magnificent

Apr 04, 2017 | 2005 Chevrolet Silverado 1500 2WD

2 Answers

Need to know spak plug firing order for a 1996 pontiac grand am


4-cylinder:

Firing Order: 1-3-4-2

3.1 liter:

Firing Order: 1-2-3-4-5-6
jturcotte_599.jpg

Sep 04, 2011 | 1996 Pontiac Grand Am

1 Answer

1997 2,4 sunfire cylinders 2 3 misfire. coil has been replaced, plugs & fuel pressure are good, and cad converter has been dropped..was melted almost shut but now fixed. what do i check now?


I would suspect a head gasket or head problem.. the catalytic converter being plugged causes heat build up in the engine and overheating in the engine can cause failure of the head hasket or head itself. The reason your cylinders are misfiring could be water leaking from a water port in the head and into the cylinder which would cause the cylinder not to fire..there might be some steamy vapor coming coming out of the exhaust if that is happening

Mar 25, 2011 | 1997 Pontiac Sunfire

1 Answer

Need firing order to 89 chevy s-10 p/u w/ 4.3 liter/6cyl. replacing plug wires


4.3 v/6 firing order for an S-10 Chevy is 1-6-5-4-3-2, a helpful tip to always locate # 1 spark plug on a v engine.
If you look carefully at the cylinder heads note the very front of each, do you see one sticks out slightly further to the front then the other?
Tghis is the way these engines have to be cast for proper cylinder and timing rotation.
The furthest forward cylinder head is in fact the home of #1 cylinder, it is the first spark plug on that head, which in this case is the right side head.

Jun 09, 2010 | 1988 Chevrolet S-10

5 Answers

Where's the number one cylinder on a ford f-150 truck?


Select your Engine for Ford Pick-Ups/Expedition/Navigator 1997-2000...

cf75b46.jpg

Ford 4.2L Engine Firing order: 1-4-2-5-3-6 Distributorless ignition system

d401c97.jpg

Ford 4.6L Engine Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition system

aa812aa.jpg

Ford 5.4L Engine Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition system (one coil on each cylinder)

5d2d834.jpg

Ford 5.8L Engine Firing order: 1-3-7-2-6-5-4-8 Distributor rotation: Counterclockwise

7af8e86.jpg

Ford 6.8L Engine Firing order: 1-6-5-10-2-7-3-8-4-9 Distributorless ignition system (one coil on each cylinder)

3e29322.jpg

7.3L Diesel engine injection order: 1-2-7-3-4-5-6-8

0d6e880.jpg

Ford 7.5L Engine Firing order: 1-5-4-2-6-3-7-8 Distributor rotation: Counterclockwise


I hope help you (remember rated this help) good luck.

Sep 14, 2009 | 2000 Ford F150 Flareside SuperCab

2 Answers

My car is not firing right,


when your engine breaks a timing belt it bends one or more valves in the engine cylinder head, that is the problem, u have bent valves.

Apr 09, 2009 | 2000 Hyundai Accent

1 Answer

Waterpump went out and engine got real hot and blew upper radiator hose replaced waterpump and hose now it wont fire


It is very likely the overheating has blown the cylinder head gasket and coolant is getting into cylinders or compression is leaking from cylinder to cylinder or both, you will need to remove the cylinder head and have it checked for warp-age and shaved flat by a machine shop if ness, and replace heat gasket.

Apr 07, 2009 | 1997 Mazda Protege

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...