Question about Isuzu Rodeo
The buttons on the dash don't respond when pressed.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a vacuum solonoid on the firewall in the middle with 2 vac lines and a 2 wire plug
thats ur problem
push the button and smack it with the handle of a screwdriver should work
Posted on Feb 07, 2009
Don't know if this will help with your exact problem, but I can share with you how I have "fixed" this.
If the 4WD indicator is flashing, then it means the 4WD select switch is working but the 4wd "clutch" hasn't released. Backing the vehicle up slowly, or sometimes just switching into reverse with the 4WD switch in the 2WD position is usually enough to release the 4WD and the 4WD indicator should go off. It after all this, the indicator still does not go off, it could be some issue with the electric 4WD clutch not releasing.
You should be able to tell if the 4WD drive is still engaged by driving slowly in a circle. On drive pavement, the front wheels will "hop" around. Don't do this too fast or too often on drive pavement, since the part time 4WD was not meant for this. The front wheels have to be able to slip in relation to each other, when in 4WD.
Hope this helps and wish you well in your troubleshooting.
Posted on Oct 22, 2008
SOURCE: HOLDEN RODEO WONT ENGAGE 4WD
If for any reason your Rodeo is or seems to be "stuck" in 2WD or 4WD
then below is instructions to reset the system
1. Ignition off, hold all 3 buttons (2H, 4H & 4L) in together.
2. Switch ignition on to the "reds" position (last position before actual engine ignition).
3. Hold in this position for 30 seconds.
Posted on Jan 16, 2010
from memory it is in inlet manifold some were in front middle section bottom, (underneath) 4ZE1?
single wire possibly yellow
Posted on Jun 25, 2009
Tips for a great answer:
Dec 14, 2015 | Holden Cars & Trucks
Dec 30, 2013 | Isuzu Rodeo Cars & Trucks
Oct 12, 2012 | Cars & Trucks
Jan 30, 2010 | 1999 Kia Sportage
Jan 27, 2010 | 1998 Isuzu Rodeo
Oct 18, 2009 | 2004 Isuzu Rodeo
596 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: