Question about Cars & Trucks
This is the interference engine
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
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
Posted on Mar 02, 2010
Tips for a great answer:
Nov 26, 2016 | Isuzu Cars & Trucks
Apr 16, 2016 | 1995 Ford Escort
Mar 22, 2016 | Isuzu Cars & Trucks
Dec 14, 2015 | Isuzu Cars & Trucks
Dec 10, 2015 | Chrysler Cars & Trucks
Jun 28, 2015 | 2002 Ford Explorer
Apr 12, 2014 | 1990 Geo Storm
May 11, 2013 | Cars & Trucks
Apr 18, 2009 | 1989 Isuzu Pickup 2WD
Mar 06, 2009 | 1993 Mercury Tracer
26 people viewed this question
Usually answered in minutes!