Question about 1984 Ford Ranger

Open Question

1984 ranger v6 runs good on higway .stals at idle

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

wyatt1582
  • 453 Answers

SOURCE: 1984 RANGER IDLE PROMLEM...WONT IDLE CORRECTLY.

First check:
Your EGR valve is carbon up and is sticking open. You have to take it off and clean with carbon cleaner. (EGR controls idle)

Second check:
Could be fuel pump is starting to go on it.

Posted on May 21, 2009

  • 1915 Answers

SOURCE: Top or bottom, which is

R12 system the smaller (diameter) port is the low pressure side, same as R134a.

Posted on Mar 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1984 Ford Ranger- will not idle at all, will start and run with your foot on the pedal at high RPM's- I installed new carb so that's not it was acting the same before- I bought it for a huntin


Check for a vacuum leak somewhere. It could b the pcv valve on the valve cover or the hose going to the brake booster. Take the hose off the brake booster and plug it. then start the engine. It might also b the base gasket under the carb.

Mar 13, 2012 | 1984 Ford Ranger

1 Answer

Top or bottom, which is the low pressure port on the ac comp for a 1984 ranger v6?


R12 system the smaller (diameter) port is the low pressure side, same as R134a.

Mar 22, 2011 | 1984 Ford Ranger

1 Answer

Boat starts fine runs idle fine, accelerate no


make sure that the timing advance mechanism in the distributor is working freely.

Sep 30, 2009 | 1984 Chevrolet Chevy

1 Answer

Does an 84 ford ranger v6 have standard anti-lock brakes?


This was not standard on 84 Ford Rangers, My online history search does not show ABS on Rangers until the 90's, when it was not even standard but an option. Hope this helps.

Sep 26, 2009 | 1984 Ford Ranger

1 Answer

1994 ford ranger 2.8 v6 engine automatic 4 wheel


That could Be caused by the TFI module Located on the side of the distributor its grey module that requires a special tool to remove the two screws

Aug 04, 2009 | 1984 Ford Ranger

1 Answer

Lifter noise


i have the same sound but I've been told that its a gasket leak from either in front or behind the exhaust manifold

Jun 01, 2009 | 1984 Ford Ranger

1 Answer

1984 RANGER IDLE PROMLEM...WONT IDLE CORRECTLY.


First check:
Your EGR valve is carbon up and is sticking open. You have to take it off and clean with carbon cleaner. (EGR controls idle)

Second check:
Could be fuel pump is starting to go on it.

May 17, 2009 | 1984 Ford Ranger

1 Answer

1984 Ranger 2.8L V6 Fuel Problem.


pull the fuel line of the carby and turn the engine over to see if fuel is comming up
if the is no fuel then the fuel pump is gone

if you have fuel the carby needle and seat is stuck try tapping the carby with a hammer where the fuel entres the carby give that a go mate good luck

Dec 29, 2008 | 1984 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...