Question about 2008 Chevrolet Uplander

1 Answer

08 uplander van turn signal clicker noise is not working

Turn signals do work but the noise indicater does not work anymore. Where is this indicater located and what is it specificaly

Posted by on

  • C.J. Mar 05, 2012

    Sorry the fix given did not suffice. This is a whole module that has to be changed which includes the speedo,tach etc. One other chance is to disconnect the battery cables and hook them together for 3 minutes, but does not always work. Thanks anyway. C.J.

  • Zhu Liang Jan 18, 2014

    How did you fix that problem?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Find ur fuse box and locate a round silver relay switch pull it and replace it and all should be well!

Posted on Feb 24, 2012

  • Zhu Liang Jan 18, 2014

    Is this the real solution? I couldn't find the silver relay switch in fuse box.

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: I need to know how to install the passenger side turn signal

Tools needed: pair of regular pliers
Look around for black, plastic wingnuts on the back of the assembly - you'll probably need a pair of pliers for leverage to loosen them up. If the assembly is nested with the headlamp assembly, just loosen the whole thing and pull it out. Just note how the things come off so you'll put them back in the same order and position. There may be an odd-shaped kind of circular metal retainer that holds the lamp socket onto the back of the turn signal fliffersham - that should twist off without any problem. Replace whatever it is you're replacing and hook the lamp back up, being careful not to touch the bulb - they don't like greasy fingerprints (although the halogen-type bulbs are even more persnickety). Make sure the lamp socket retainer is screwed on correctly and tightly (It's a terrible design and is difficult to tell if it's really seated properly) and then fasten the assembly back onto your bumper with the wingnuts - tighten gently with the pliers.

Posted on Mar 12, 2009

  • 6 Answers

SOURCE: Turn signal clicker clicks when I press on the brake pedal

change the relay

Posted on Jun 27, 2009

captaynkyrk
  • 170 Answers

SOURCE: o2 sensors

The dealer would have that exact spec for your car. Do you have any friends who are in the auto repair business or that work at an Auto Dealership? The car you have is so new that there is no repair manual out yet to cover it. I have called Chevy Dealership Parts departments before to ask questions and it depends on the person on the other end of the line, as to weather they will give you the right info. Usually they will because it means they could sell you a part or some service work. Try calling and asking or even talking to a service writer or mechanic at a shop. You'd be suprised at what you might find out.

Posted on Jul 05, 2008

jsmes1027
  • 749 Answers

SOURCE: Turn signal clicker comes on randomly but doesn't affect lights

The hazard switch controls both the turn signals and hazard flashers.Should be located above the radio on this vehicle.Dealerships generally have quite a few of these on hand and is a much cheaper solution then replacing the turn signal switch. On some occasions it is the turn signal switch but most often is the hazard switch.Hope this helps.

Posted on May 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 2002 E150 ECONOLINE VAN. THE RADIO, THE HORN, TURN SIGNALS AND ER FLASHER QUIT WORKING.


Could be a lose connection in the dash , more then likely . Who replaced the gauge an drive indicator ? The horn / cruise control /turn signals / radio all share a common ground point it looks like ,G203
G203 Behind upper LH side of I/P, near cowl
Maybe after gauge & drive indicator replacement connection became lose . None of these componets share a power supply (fuse) I can't send picture of the location of G- 203 sorry ! Instrument cluster would need to come out to see the ground .

Dec 26, 2016 | 2002 Ford Econoline Cutaway

2 Answers

Is this part I have related to my turn signal switch is on my 1976 cutlass supreme


I don't recognise it but it could be a clicker or a warning buzzer. Lots of drivers like to hear the turn signal clicking when it is switched on but it wasn't always convenient to design them that way so manufacturers sometimes provided a clicker to provide the required noise.

You could try connecting it to 12 volts via a small fuse to see or hear what happens.

Feb 25, 2015 | Cars & Trucks

1 Answer

What would cause 2004 thunderbird left rear turn signal to not work and bulb is o.k.


You need to check for power to rear light if none start to check wiring in reverse. Usually at turn signal switch or under drivers side carpet.

May 14, 2014 | 2004 Ford Thunderbird

1 Answer

The turn signals for my 2002 Volkswagen Jetta TDI work great, except the clicking noise keeps going well after the turn has been made and the clicker turned off, etc. All the bulbs are in working...


More than likely you've got a short in the turn signal switch. I have replaced a few of them.
It's easy to replace, but you need some specific tools and getting the airbag out takes some practice.

Jan 09, 2011 | 2001 Volkswagen Jetta TDI

2 Answers

Turn signal clicker comes on randomly but doesn't affect lights


No the dash is the hazard light switch, it's also the turn signal flasher, dealer part only replace, replacing it will fix your problem. Feel the switch when you hear the clicking.

May 21, 2010 | 2004 Chevrolet Malibu

2 Answers

Tiburon 04, left turn signal lights stay on once activated by either turn switch, hazard light switch, or alarm. Can sometimes get them to go out by using right turn switch position, or playing with hazard...


replace the turn signal 'Clicker' also known as the turn signal relay. Most likely the problem unless you have a really wierd electical issue that will be hard to isolate...

Peace,

Jan 23, 2010 | 2004 Hyundai Tiburon

1 Answer

Turn signal clicker has a mind of its own


if you diconeect you will have no signals.
sometimes its the hazzrd swich sometimes its the signal light switch

Nov 21, 2008 | 2003 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

1,061 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...