Question about 1992 Ford Probe

1 Answer

My turn signals stopped working suddenly on my 1992 ford probe lx. Prior right side was blinking faster. Changed signal switch next to steering column changed turn sinal/hazzard flasher by the clutch pedal. Little green box 2 in 1. Is there another flasher anywhere or a relay? Bulbs and fuses are fine.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 32,281 Answers

If this is not working on the right side and is OK on the left side then one of the indicator lamps on the right side has blown out. The reduced load on the right hand indicators causes the flasher can to flash faster.
Try turning on the hazard switch then walk around your car to see which lamp has blown out.

Posted on Feb 25, 2012

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 1998 Ford Ranger XLT turn signals, hazzard flasher not working

wire plugin on back of turnsignal switch not making a connecting

Posted on Jan 15, 2009

  • 14 Answers

SOURCE: 1992 ford probe lx

its probable a blown fuse have you checked those at all

Posted on Feb 07, 2009

  • 1779 Answers

SOURCE: both front and rear turn signals stopped working

Your turn signal flasher needs to be replaced (the hazard flasher is separate unit). Your owners manual should have the location of the turn signal flasher (usually on the fuse block under the dash).

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left bleaker and break light not working. Turn signal works bleaks faster than right side.


Has the vehicle been in an accident on the left rear side. First check the bulb to be sure it is not defective, trade it out with the side that works properly to test. If the bulb works well then My thought are you may have a shorted wire. The turn signal flasher works by heat build up within the flasher the heat is caused by the load of the bulbs, the load heats the metal spring causing it to open the circuit then as quickly as it cools down the circuit closes again lighting the bulbs.
There is also a possibility of a defect in the turn signal mechanism on the steering column. The turn signal switch on many models does three different things on many models that use the same bulb element / or bulb for brake and turn on rear of vehicle. It controls the circuit for brake light by sending power both left and right side rear when turn signal is in neutral position then when turn signal is in left turn the switch cancels brake light power to left side rear and supplies flasher power to left side while maintaining brake light supply to the right side rear, and so on opposite when the right turn is chosen on turn signal switch. The turn signal indicators on the dash normally run off the same circuit as front turn signal bulb only which is also controlled by turn signal switch. Front has turn signals but no brake light.
I think there is an additional load on the left side rear turn circuit and it could be either a wire that is shorted or the turn signal switch if the same bulb element is used for both functions.
Often times if trailer lighting is connected the flasher will also blink a little faster because of the extra load of additional bulbs.

Feb 15, 2015 | Cars & Trucks

2 Answers

Front right and back right turn signal wont work but the front left and back left do


first check the bulbs on that side by visual or changing to the other side if you can't see that well if the bulbs from the front and back work or are good when checked the flasher has blown out on one side and you have to replace it other possible cause could be a broken wire for the right side lights so look at the connectors for that side front & back if all is good one more thing could do this the actual turn signal lever that you use to activate the signals could be bad for the right side especially if it does not go back to the normal position after making a turn and the steering wheel rotates back to it's normal position but the turn signal lever does not click back to the center position this would burn out that side from the signal constantly being on good luck stephen

Jan 03, 2015 | 1991 Ford Probe

1 Answer

I have a 1992 chevy c1500 with light issues. Left turn signal works fine, right side blinks like 4 ways,along with license plate light.when head lights are on nothing for right side turn signals. Hazards...


It seems to be a ground defect on right side. Do you have the same bulb's number . What about the front flasher. remove right rear lamp assembly remove connector measure voltage between ground and current .reconnect it measure voltage at bulb socket. you should find your problems
hope it helps

Dec 07, 2014 | 1992 Chevrolet C1500

1 Answer

What would cause the turn signal to blink continuously?? The only time the left one stops blinking is when you use the right signal??


sounds like the turn signal switch in faulty.
i found some great info that explains the switch and its functions.


Self Canceling Signals How Turn Signals Work

(page 4)
Cheers!

Oct 30, 2014 | Cars & Trucks

2 Answers

Signal lights do not blink on my chevy lumina APV


its not getting grounded good or its the blinker switch in the steering colum

May 14, 2012 | 1992 Chevrolet Lumina APV

2 Answers

My turn signal switch is sluggish and grinds. The left turn signal does not work. I have changed fuses and bulbs, and flasher unit. When I turn on emergency flasher, only the right side blinks. when I...


sounds like the awitch is bad ....first check connection in the steering colume....where the switch plugs in ....the turn signal switches themselfs do go bad

Jan 30, 2011 | Chevrolet Blazer Cars & Trucks

2 Answers

96 Ford Taurus no turn signals or hazards


Take the turn signal lever and jiggle it, a lot. If they start working, the switch is bad. You can also turn on the hazards and take hold of the button and push it left , right , forward and back and see if they start working. If so, replace the turn signal/ hazard switch.

Nov 24, 2009 | 1996 Ford Taurus

1 Answer

Turn signals


The Flasher Relay is located Front seating area, driver side, under dash, mounted on upper passenger side of steering column support. This info curtsey of Auto Zone.

Aug 19, 2009 | 1992 Ford Thunderbird

1 Answer

2006 Mustang left turn signal acts like hazard lights.


a short in the tilt steering coulem typical...ford and gm problem

Jul 20, 2009 | 1992 Ford Thunderbird

1 Answer

Turn signals blinking fast and stop when brakes applied


likely not, but change /check anyhow....If problem persists, likely you will need to change the module that controls directionals (usually under dash to the right of steering column)

Apr 26, 2009 | 2005 Jeep Grand Cherokee

Not finding what you are looking for?
1992 Ford Probe Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...