Question about 1998 Buick Century
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fan will be under dash on passengers side , Removing glove box might be needed, Gm also uses a blower resister ro control fan speeds. First check your fuse and then check and make sure your getting 12 volts to the terminal at the blower, You could have a blown fuse, a bad switch, or a bad resister , if your getting voltage to blower motor then most likely it will be the motor. These are not to difficult to change. I hope this helps, please be aware I can only guess at what the problem is from my past experience.
Posted on Dec 18, 2008
SOURCE: "Change oil soon" light
Turn your key to the on position wait until all of your indicater lamps do their thing . Then pump the gas pedal 3 times in rapid motion in less than 5 seconds. Wait until you see the change oil light start flashing. If this does not happen then turn the key off turn it on again and repeat the procedure.
Posted on May 24, 2009
This is a very common problem. I too have this going on. I found a Edmunds Forum and a poster has a fix, at least for him. Link: http://townhall-talk.edmunds.com/WebX?14@@.ef22120/307#MSG307 and see if this is your problem too. I ordered a new headlight switch. Its an easy replacement too. Remove the left side dash panel, two screws and the 20 pin connector. Hope this helps.
Posted on Feb 22, 2010
P0401 sets when EGR flow test runs and fails. EGR may be moving too slow or not at all. May be a bad connection.
P0442 sets when vacuum decay test indicates small leak in the EVAP system detected during diagnostic test. Check for a loose or defective gas-cap. If the cap is fine it may be a false code or could be related to another EVAP component.
Posted on Apr 27, 2010
Tips for a great answer:
Jan 19, 2013 | 1998 Buick Century
Aug 24, 2011 | 1998 Buick Century
Jul 20, 2011 | 2003 Buick Century
Apr 06, 2011 | 1998 Buick Century
May 21, 2010 | 2003 Buick Century
May 12, 2010 | 1998 Buick Century
Mar 20, 2010 | 1998 Buick Century
Jun 15, 2009 | 2002 Buick Century
Feb 13, 2009 | 1998 Buick Century
Jan 30, 2009 | 2005 Buick Century
248 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: