Question about 2005 GMC Envoy

Open Question

When having problem with the camshaft in a envoy will it make u think u r having transmission problem

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 envoy which wont move when put into gear. Is this a lockdown mode and how to fix it?


if their is a check engine light have the code read ------no such thing as lock down mode you have limp mode which will let you limp vehicle home or to a shop or off road safely sounds like a transmission problem check fluid --look and smell if it looks burnt brownish and or smells burnt try a flush with a fluid and filter change may gey lucky ---look under vehicle and check the selector cable and connections sometimes disconnect or rot away lastely possible internal problem which would need a transmission specialist to look at

Jun 04, 2016 | 2004 GMC Envoy SLT

1 Answer

Fouled camshaft sensor


You must take it to someone who has the ability to access the OBD2 codes for the transmission. Your transmission may or may not have to be pulled as some codes can be repaired by replacing sensors or solenoids.

May 27, 2014 | Chevrolet Tahoe Cars & Trucks

1 Answer

Transmission slipping on 03 GMC Envoy. what does iy mean when trans fluid measure high on dip stick?


Two things: #1 someone has overfilled it by mistake thinking they were putting oil in the engine. Yes I have seen this.
#2 The transmission cooler in the radiator could be leaking antifreeze into the transmission through the cooling line raising the fluid level. I would look for milk shake foam on the dip stick and make sure you check trans in park and not neutral.

Jan 01, 2012 | 2003 GMC Envoy

2 Answers

We have 5 codes, po141,po172,po606,po014,po016 on a 2004 gmc envoy xuv. Can you help.


Here is a brief description of the codes;
P0141 - rear O2 sensor
P0172 - system too rich
P0606 - PCM internal failure
P0014 - Camshaft phasing off
P0016 - Camshaft position and crankshaft position off

This going to require a qualified technician to diagnose. The PCM issue may require a reflash of its memory or a replacement.
The other codes could be related to each other. One suspect item is the camshaft position actuator, sometimes it gets clogged with oil and make it fail.

Aug 09, 2011 | 2004 GMC Envoy

1 Answer

Need to know where to find camshaft position sensor on 2004 gmc envoy


In the attached figure, item #908 is the Camshaft Position sensor

freddyboy61.gif

Mar 10, 2011 | 2004 GMC Envoy

1 Answer

My 2002 GMC Envoy transmission slips into neutral


try adding fluid and if still slipping neeed to have it checked could just need a fluid change

Oct 15, 2009 | 2002 GMC Envoy

3 Answers

Fan clutch and coolant flush


If there is another dealer nearby get a second opinion. Repairs these days are very expensive.

Sep 24, 2009 | 2003 GMC Envoy

1 Answer

3 codes present on my 2002 Envoy. p0172, p0420, and p0340,


Track the p0340 first camshaft timing is very important and could possibly cayse your other codes,Call your local GMC dealer I think I remember a bulletin about this code.

Aug 21, 2009 | 2004 GMC Envoy

1 Answer

02 envoy


Just like when you have a loss of 4x4 drives, it is a drive sensor and elevator problem. It seems like everyone of the major types of fixes like this are 600.00 at the dearlership,, takes about 2 or 3 hours,, but vehicle will run like new afterward. I dont think this is a do it yourself type of a project.

Oct 20, 2008 | 2002 GMC Envoy

Not finding what you are looking for?
2005 GMC Envoy Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...