Question about 1999 Ford Mustang Cobra

1 Answer

Where are the vacuum lines on a 99 mustang 3.8

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

I suggest looking for a Workshop Manual in your local library or ask your dealer; also could visit Autozone.com

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 24, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 Mercury mountaineer 22wd rpm jumping up an down at same speed 4.0 soch


My throttle position sensor was out of range even on new one had to slot the screw holes to allow proper idle speed .
Also vacuum leaks
'86 mustang 302ci irregular idle speed.
Loose throttle body or intake creating vacuumleaks.
Need to use a scanner to try to pin it down.
Dirty or faulty map or maf sensors
But I think you'll find rotten rubber vacuum lines.

Apr 22, 2016 | Mercury Cars & Trucks

1 Answer

Why will my hearter controls in my 99 mustang change to vents ?


Vacuum leak somewhere. Also there's a check valve in the vacuum supply line that is probably leaking.

Jun 29, 2015 | Cars & Trucks

2 Answers

2004 mustang gt. air does not blow from dash vents or defrost


Open hood , passenger side firewall area, look for a thin,black vacuum line, follow it and look for any breaks or bad connection to its vacuum source. repair as necessary.

Dec 25, 2013 | 2004 Ford Mustang GT

1 Answer

99 ford mustang behind glove compartment hissing


Could be several diff things, might be as simple as a leak in the air condition duct work, turn off the air when you start it and see if it goes away. Also there is a vacuum line under the dashboard, you will have to remove the glove box to trace it down. GOOD LUCK!

Sep 21, 2012 | Ford Mustang Cars & Trucks

1 Answer

What would make heat and air blower motor only run slow on every speed switch no matter low or high 1991 ford mustang


If not the switch, you need to check vacuum lines near the firewall inside the engine compartment and under the dash. Just in case. I had problems with mine blowing only through the defrost because of a broke vacuum line. Good luck

Aug 14, 2011 | 1991 Ford Mustang

1 Answer

97 ford mustang.the fan won't change positions


First thing I would check is all of your vacuum lines. I had same problem and turned out there was a split in one of my vacuum lines. Once I repaired it, it worked perfectly again.
thanks,
Lee

Jul 26, 2011 | 1997 Ford Mustang Cobra

2 Answers

Where does the vacuum line go on an automatic transmission in a 67 mustang


You should have a thing that looks like a fuel filter close to the rear of the trans. called a transmission modulator, should look like this. . transmission_vacuum_modulator.jpg

Feb 07, 2010 | 1966 Ford Mustang

2 Answers

I don't know where the vacuum lines run to on my 93 mustang


normally, there is a diagram of the vaccuum lines on the underside of the hood for the emission controls. look there.

Aug 25, 2009 | 1993 Ford Mustang

1 Answer

99 Mustang GT Cruise Control


What exactly is it doing or not doing for that matter. Check vacuum lines going to the unit and see if you have any broken hoses. I'll try to get a schematic to you. It's best if you give me your email address so I can send it to you.

Jul 13, 2008 | 1999 Ford Mustang Cobra

Not finding what you are looking for?
1999 Ford Mustang Cobra Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...