Question about Chevrolet Silverado 1500

1 Answer

Po452 and po446 on 04 chevy silverado have replaced fuel pressure sensor and reset but code po452 keep poping up

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,431 Answers

P0452 evap control pressure low, P0 446 evap vent contol circuit. Becuase you have P0452 you are dealing with a eletrical issue whether you have positive tank pressure or negative pressure, The tool for this is a volt meter.452 happens when you positive pressure and the FTP reads less than 0.1 volts.You need to jump the signal and the reference and monitor the take parameter on a scan data you should read reference voltage.Now if you dont have a scan data tool. inspect the wire for any breaks or shorting 2 thing of concern broken wire to the FTP or a ECM is needed.

Posted on Feb 24, 2012

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 7353 Answers

SOURCE: po452 trouble code changed sensor engine light

you may have to drive it several days for the light to go off, or have the codes cleared. personally I would just drive it. if the computer tests it, and it passes the test, it will go off on its own.

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble codes PO440 and PO452


PO440-EVAP SYSTEM NO FLOW DURING PURGE.CODE PO PO452 - FUEL TANK PRESSURE SENSOR CIRCUIT LOW INPUT.

Oct 07, 2012 | Chevrolet Avalanche Cars & Trucks

1 Answer

Where is the fuel pressure sensor on my 2004 chevy blazer


This code has to do with the EVAP system and not the fuel pressure. The first thing to do is make sure your gas cap is tight. If this does not solve the problem, you will have to have the truck diagnosed by a qualified technician with a proper scan tool.

Aug 21, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

PO452 sensor needs to be replaced. Where is it located on a 1999 chevy blazer 2 wheel drive.


P0452 fuel tank pressure sensor-low voltage the sensor is located on the top of the fuel tank. try a new fuel cap before you replace any thing else, if the seal is bad on the cap it culd set the code.

Jul 16, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

2000 chevy silverado not running good, stalling wont take gas computer shows code po452 is this a common problem?


This is the code for the fuel pressure sensor, either the pump is failing or the sensor is bad causing the computer to screw up the air gas mixture. Also this code is for fuel tank pressure sensor it could be bad wire or sensor or pcm computer need scanner to do the test may be local shop can help or dealer

Jan 07, 2011 | 2000 Chevrolet Silverado

2 Answers

I have a 1998 saturn sl1 with a code PO452 how do i fix it


CODE PO452 IS FUEL TANK PRESSURE SENSOR CIRCUIT LOW INPUT CONDITIONS.YOU COULD HAVE A FAULTY FUEL TANK PRESSURE SENSOR.

Apr 18, 2010 | 1998 Saturn SL

1 Answer

2001 silverado 4.8 what is a recognized problem


well this code is for fuel tank pressure sensor it could be bad wire or sensor or pcm computer need scanner to do the test may be local shop can help or dealer

Feb 08, 2010 | 2000 Chevrolet Silverado

2 Answers

Codes po452 and po453


both codes point to the fuel tank evap pressure sensor. High and low input faults.
Try clearing the codes first and seeing if they come back

You may have a vacuum leak, cracked or open vacuum line or faulty sensor.

Dec 21, 2009 | 2001 Chevrolet Blazer

1 Answer

Codes on my 2001 Blazer are Po452 and Po651 What do I look for?


CODE PO452 FUEL TANK PRESSURE SENSOR CIRCUIT LOW INPUT CONDITIONS.YOUR FTP OR FUEL TANK PRESSURE SENSOR FAILED. PO651 5 VOLT REFERENCE 2 CIRCUIT MALFUNCTION CONDITIONS.POSSIBLE CAUSE 5 VOLT REF.CIRCUIT IS SHORTED TO CHASSIS OR SENSOR GROUND.OR 5 VOLT REF CIRCUIT TO MAP OR TP SENSORS CIRCUIT IS SHORTED TO B+.ALSO YOUR PCM HAS FAILED.YOU PROBABLY NEED TO TAKE IT TO DEALERSHIP.THEY HAVE DIAGNOSTIC EQUIPMENT TO CHECK SENSORS AND PCM FAILURE.

Nov 10, 2009 | 2001 Chevrolet Blazer

3 Answers

Po452 trouble code changed sensor engine light


you might try unhooking the battiey for 20min both + and - posties cuz that will force the computor to have to resest only if you have addressied the fuel pressure problem which taht would most likly be your filter which isn't all that much

Sep 21, 2009 | 2000 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...