Question about 1995 Oldsmobile Aurora
Mass airflow sensor(MAF), is located in the airway between the throttle body and the air filter of an engine.
i suggest you to clean the sensor from all dirt to make the sensor accurate air flow readings.
Posted on Feb 24, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 01 olds aurora
bank 1 sensor 1 will be in exhaust manifold by firewall in the middle. bank 1 sensor 2 will be behind convertor .bank 2 sensor 1 will be in the front manifold down at the end of it
Posted on Aug 20, 2008
the sensor is in the water jacket lower part of the engine block, u are lookin in the right place, u do need the car up so u can get to it from underneath, u can't see it from up top.
Posted on Feb 19, 2009
There are different locations in the exhaust system where O2S sensors are positioned. The locations have been given numbers and will be used in the accompanying charts to identify the positions of O2S sensors in most vehicles.
Due to mid-year production changes or factory inconsistencies, all models may not be covered. If a vehicle being serviced is not covered in the charts, inspect the exhaust system (while cold!) in the general locations to find the applicable O2S sensors.
NOTE: If equipped with dual exhaust systems, there may be up to 4 or 5 O2S sensors in the exhaust system. Be sure to locate all of them before commencing with any testing or service.
Fig. 1: Location No. 1 — down pipe or exhaust manifold
Fig. 2: Location No. 1 — typical O2S sensor located in the exhaust manifold
Fig. 3: Location No. 2 — left and right banks of a V-type engine
Fig. 4: Location No. 3 — exhaust collector (where more than one pipe joins together)
Fig. 5: Location No. 4 — outlet of the catalytic converter
Fig. 6: Location No. 5 — inlet and outlet of the catalytic converter
Posted on Jul 21, 2010
The coolant level sensor is inside the coolant bottle. It is not replaceable separately. You will have to replace the reservoir to replace the sensor.
Posted on Sep 07, 2010
Tips for a great answer:
Feb 26, 2013 | 1999 Oldsmobile Aurora
Jan 24, 2013 | 1995 Oldsmobile Aurora
Feb 24, 2012 | 1995 Oldsmobile Aurora
Dec 29, 2010 | 1997 Oldsmobile Aurora
Sep 14, 2010 | 1995 Buick Riviera
Jun 05, 2010 | 1996 Oldsmobile Aurora
Feb 03, 2010 | 1995 Ford Windstar
Nov 20, 2008 | 1998 Oldsmobile Aurora
349 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: