It cut the van off one time before but the next day it started right back up.
If you are dealing with the anti theft the anti theft will flash as you are trying to start the vehicle if this is the case then it is the anti theft if not then you are not dealing with a ant theft issue. You can do a 30 minute relearn procedure without a scan tool. here is how Turn ignition on without the engine reunning.attempt to start the vehicle then release the key to ON.(vehicle doest start) Observe the security light.afeter 10 minutes the security light will turn off.Turn off the ignition and wait 5 seconds.do this 3 times for 30 minutes. start the engine with the engine started the vehicle will learn the passlock key.
SOURCE: replaced ctm unit and truck won`t stay running.
there are 2 sensor on the carb . you may need to replace both to find out whiche one it is . try this also give it gas while starting and when it starts you will have to keep your foot on the gas a little to keep it running if it runs that way its one of the 2 senors .
SOURCE: A person's 1994 Deville Cadillac
Go to this link. It explains the system and offers some "so it yourself" solutions for this problem. http://vatspasslockpasskeysecurityhelp.yolasite.com/
SOURCE: how do you bypass anti thief so my car will run.
there is no easy way. the problem is most likely the key tumbler failed and a code will indicate this. if it was easy to bypass the security it wouldnt be security.
800 views
Usually answered in minutes!
×