Question about 1994 Mazda 626

1 Answer

I 2 have a problem with my hold light when i drive far off it starts flashing hold & jerks into gear i have a mazda 626 1994 i undo the battery it quits 4 a while what could it b 7 will it b expen

Can i simply undo it somehow and if i can how

Posted by on

  • jenniferr852
    jenniferr852 Feb 24, 2012

    the transmission does fine around town its only when that hold button gets hung up that it changes hard when i undo the battery after a couple minutes it goes off and changes out fine until i go for a long drive. u still think the trnsmissions shot or could it b sometning else i dont want 2 put alot of money in it if its something major, it being that older of a car, what do u think?

  • jenniferr852
    jenniferr852 Feb 24, 2012

    i've checked the transmission fluid it mainly looks red no metal shavings the trasmission changes out fine only time the button hangs up is on a long trip and when its on it changes out hard if i pull over and undo the battery 4 couple minutes it quits for a while and changes out fine again, i dont want 2 put alot into the car being old as it is if its something major though what do u think?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 2,431 Answers

You describe a internal transmission failure Check the transmission fluid what is the color if its blackish then you have transmission failure. Your fix is another transmission rebuilt

Posted on Feb 24, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

csmock132
  • 4669 Answers

SOURCE: gearbox removel mazda 626 1991

yes, that is what you do. You are almost there, keep going.

Posted on Feb 27, 2009

c17hydro
  • 2984 Answers

SOURCE: im actually looking for the location of a starter

It is on the driver's side.....this is looking up at it and towards the center of the car--

8959bea.gif

Posted on Oct 10, 2009

  • 10865 Answers

SOURCE: how do you remove wheel lock nuts without a key or

Hello. I recommend that you drive to any tire store, or tire repair shop where they will have air tools and a special nut buster device [Snap-On tools has a beauty]. If might cost you a couple of bucks but it will be worth it.

Posted on Dec 05, 2009

  • 1 Answer

SOURCE: 1994 mazda 626 4 cylinder transmission hold light

Hi, The best way is to take it to a Auto Trans Specialist who will put it on an obd scanner (saves alot of mucking around & costs about $50) this should tell you exactly what needs to be fixed.

Posted on Jan 27, 2010

  • 67 Answers

SOURCE: I have a mazda 626 it will turn over but it won't

If the timing belt or chain is broken, or if there is no oil pressure, the car will not start to protect the engine from damage. Check these two items.

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could cause my 1997 madza to jerk in 4th gear then sometimes the hold light would flash


my guess is this a automatic or a manual shifted STICK shift cars.

? the key to any help is to say what is there.

we are blind here. (mine was a stick)

Jun 14, 2014 | 1998 Mazda 323 1.3

1 Answer

Jerking accelerating


This may be normal but you can adjust your driving to reduce the impact. To speed up the warm up process of the catalytic converters, the power train computer holds first gear a little longer than normal. This causes your car to get higher in the rpm range than normal, at part throttle, which causes the hard shift. On your first drive, try NOT to accelerate while the car is in first gear--it won't take long for you to learn how far this is.

Apr 22, 2014 | Mercedes-Benz E-Class Cars & Trucks

1 Answer

Hi ihave a 2003 mazda 6 s v6 that i bought just over a month aqo. my check engine light came on i had it tested they told me it could be spark plugs or coil packs that i needed . so i got need bosch spark...


First I would find a garage that doesn't charge for diagnostics. I don't unless it is an electrical issue, which I usually fix when I find it. Second you have to get the coolant leak taken care of. This could be the entire problem. If you have overheated your car, it could have blown an intake manifold gasket or a head gasket letting coolant into the cylinders. This would pop 02 and misfire codes. This would also account for the jerking and hard starts. Also just a note get rid of the bosch plugs. Worthless. Go with what the manufacturer recommends. they may cost more but well worth it.

Jun 17, 2011 | 2003 Mazda Mazda6

1 Answer

Mazda 626 hold light flashes


it's probably the problem with the sensor failure or the switch fails to completely off the current flow, it's a miner issue so for hazel free drive do visit the nearest MAZDA authorized service station or see for a good skilled & experienced mechanic who may sort out this problems so till the next this is siddhesh saying bye for now feel free to ask any quires regarding automobile field we will be happy to help you so till the next time have safe drive & happy motoring.

Oct 08, 2009 | 2000 Mazda 626

2 Answers

Check engine light intermittently flashing, car jerking.


Could be fuel or electrical related. Since you may not know the history, this may take a while.
Any amount of smoke from exhaust? White, Blue, Black?
Start with most obvious and inexpensive:
1. Fuel filer clogged (replace fuel filter).
2. Could be the ECM (Electronic Control Module). It controls the ignition spark timing.
A few other things... consider other expert solutions...

Sep 25, 2009 | 2003 Mazda Protege

2 Answers

HOLD LIGHT FLASHING ON DASH PANEL


There's most likely an issue with your transmission. Bring it to a shop to have it scanned for any codes

Sep 16, 2009 | 1994 Mazda 323

1 Answer

My hold light is flashing in my 2001 mazda millenia


hold light flashing means you have a transmission fault of some kind, check vehicle speed sensor

Jul 02, 2009 | 2001 Mazda Millenia

2 Answers

Starter clicks but does not turn over


typically, this is indicative of a worn out starter. inside the starter there is a coil that pushes the drive gear into the flywheel (this is what makes the click) and then there is a motor that turns the drive gear. The armature bushings of the motor are likely worn, and having difficulty making continuity. (sometimes lightly tapping the back end of the starter with a hammer will get it to work). ultimately, the starter has to be replaced. best of luck

May 14, 2009 | 2001 Mazda MPV

1 Answer

Auto transmition wont go into 3rd and 4th gear


I had the same problem I changed the transmission fluid & put a new filter in the trans, this fixed it good until I put my foot down to overtake the trans kicked down to 2nd gear & the hold light started flashing again & the trans started slipping again. I stressed over it for a day or 2 & then I took it out for a drive & thrashed it, Low & behold it came right. When you change fluid its impossible to get all the old fluid out because the torque converter holds a liter or two under pressure, so when I put my foot down some of the gunk blew through & blocked the pump it looses pressure & cant change gear. You need to get it flushed by a transmission specialist   

Apr 23, 2009 | 1996 Mazda MX-6

2 Answers

Mazda 626 'HOLD' light after gear box oil seal was replaced


I have the same problem with my car I think its the torque converter clutch but you should visit a diagonestic machine just to find out

Dec 06, 2008 | 1998 Mazda 626

Not finding what you are looking for?
1994 Mazda 626 Logo

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...