Question about 2000 Toyota Celica

2 Answers

Headlight switch toyota celica

Where is it on a 2000 model. Headlights wont come on, fuses and relay are good, high beams,fog lights, and parking lights work.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 75,822 Answers

The headlight control switch is on the steering column. To replace the switch remove the plastic trim covers over the steering tube to reveal the switch and connectors. Disconnect the battery negative cable before starting work, this is a must. Below is a picture of the switch.
headlight switch toyota celica - 2_24_2012_4_45_29_pm.jpg

Posted on Feb 24, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,431 Answers

You have a automatic light control.The sensor is more likely your problem It should be on the top part of your dash.Double check the function of the combination switch also

Posted on Feb 24, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ourhowse
  • 2007 Answers

SOURCE: How do you change the headlight bulb (low beam) on

You should be able to access the buld holder from the rear of the headlight. It's a nylon bulb holder with a lock thing on it. You squeeze the lock part and turn it counterclock wise, and it should come out. Remove the old bulb and install the new one being careful not to touch the glass of the new bulb with bare fingers. The finger print you will leave can cause the bulb to prematurely die on you.

Posted on Jun 15, 2009

  • 2 Answers

SOURCE: Headlights

I READ ONLINE THAT THERE WAS A RECALL ON THIS YEAR AND MAKE, CHECK WITH TOYOTA WEB SITES TO RECTIFY YOUR PROBLEM

Posted on Jul 25, 2008

  • 170 Answers

SOURCE: 85 Toyota Celica GT Headlights problem

Bad headlight switch or relay, or shorted wire. I would check the relay first.

Posted on Feb 07, 2009

  • 259 Answers

SOURCE: Low Beam Headlights Not Working

to troubleshoot i would suggest buying a new headlight if the new one works just buy the other one it is not uncommon for just one beam to go out hope this helps regards jim

Posted on Mar 18, 2009

  • 507 Answers

SOURCE: 2006 Toyota Camry....headlights will not come on;

there was a recall on the headlight switch up to 06 camrys,find out if your car is affected by calling Toyota with the chassis no,and month of build

Posted on Nov 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlight wont work


P lights and fogs are fused separately to h lights. Go to the fuse box. Next the high low relays, then the column switch, but have a test lamp ready to test for a supply at the actual headlamp because if there is power to the lamp but no light, check the ground wires from the headlight unit are tight and on clean bare metal

Aug 01, 2014 | Cars & Trucks

1 Answer

Integration relay


check the lamp itself to be sure it isnt burned out... check the main fuse and relays under the hood... check for bad wires throughout the lighting system (time consuming and tedius)

Feb 11, 2014 | Toyota Tundra Cars & Trucks

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

2 Answers

I have a 2001 toyota celica gt. both front headlights will not come on. the high beams work. the car was hit in the front. does the headlight circuit have a fuse or a relay and where is it located. i found...


Have you checked the light globes ? The globes have a filament for each of Low and High Beams and the Low Beam ones fail much sooner than the high. A bump as you describe may have been enough for the Low beam filaments to fail as the filaments get brittle through age.

Sep 07, 2010 | 2001 Toyota Celica

1 Answer

Headlights don't work on 2000 S-10


try replacing one of the bulbs if that does not work then you have a bad head light switch.

Jul 19, 2009 | 2000 Chevrolet S-10

1 Answer

After turning ignition, only parking lights work. low beam headlights were replaced recently. parking lights wont even turn off. headlights


I had an S-70 with the same problem what happens is the headlight switch tabs that hol it together broke and the switch was slightly separated and connection was not there for the headlights and also check the high beam see if headlights come on i dont think it is a relay or fuse??? proballally the headlight switch and easy to replace you even can use one from an 850 model

May 17, 2009 | 2001 Volvo S80

3 Answers

Low beam headlight is out, doesn't look like a fuse


Check the Headlight Switch. If your headlights come on automatically check the headlight sensor and its associated relay.

Mar 26, 2009 | 2000 Subaru Outback

1 Answer

Headlights


I READ ONLINE THAT THERE WAS A RECALL ON THIS YEAR AND MAKE, CHECK WITH TOYOTA WEB SITES TO RECTIFY YOUR PROBLEM

Jul 13, 2008 | 2005 Toyota Corolla

Not finding what you are looking for?
2000 Toyota Celica Logo

545 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...