Question about Porsche Cayenne
2004 porsche cayenne radio stopped working
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it should have one its only covered with plastic cover on it and the proper way to jump it is positive to positive then negative to source and just connect to a good ground the other vehicle..
Posted on Dec 23, 2008
SOURCE: Windscreen wiper problem
The left and right wiper are on the same fuse and same switch, as well as the same wiper motor. That being said- if one works and the other doesn't, the fault lies with the wiper motor itself, or with the wiper shaft (where the arm connects to the motor.)
A wiper motor has 2 output shafts that either wiper arm connects to. At the base of your left wiper arm is a small cap. (there's one on the right side too, but let it be since it is working!) Remove this and unbolt the wiper arm from the output shaft and pull outwards to remove it.
When you examine the assembly you will notice that the wiper arm and output shaft are splined, which allows the rotational movement of the output shaft to be transferred to the wiper arm. It is common for the contact area of these splines to become damaged. This is often caused by excessive drag on the wiper arm and blade. (ie running the wipers over a dry windshield, or trying to unstick a wiper blade that is frozen to the windshield)
The 1st test is to turn on the wipers and observe the now exposed wiper shaft. Does it spin at all? If it does then problem is damaged splines on the wiper arm. (the arm is made of much softer metal than the output shaft, which makes it easier to repair this problem.)
If it turns out that the splines are damaged the 1st thing to try is to clean them up a bit. I have had luck using a very sharp awl to trace the path of the splines. A locksmiths file is very useful if you need to reshape them a bit. After cleaning up the splines reattach the wiper arm and see if it works. If not the arm will need to be replaced.
Now, if you test to see if the output shaft is turning and it is motionless while the other side wipes away, then the wiper motor and assembly needs to be replaced.
When reinstalling the wiper arm do your best to make its position match the other arm. press it onto the shaft and run the wipers a bit to make sure it is where you want it before bolting it back up.
Posted on Apr 24, 2009
Hi, British Summer time hey! You can use the indicator stalk to access to menu.
Navigate your way to settings, the select the Clock option and set the time using the ricker switch, you can also format the clock to 12 /24 hour - enjoy!
Posted on May 04, 2009
Tips for a great answer:
Aug 12, 2014 | 2004 Porsche Cayenne
Jun 25, 2014 | 2004 Porsche Cayenne
May 12, 2014 | 2008 Porsche Cayenne
Feb 23, 2011 | 2004 Porsche Cayenne
Dec 06, 2010 | 2004 Porsche Cayenne
Sep 06, 2010 | 2004 Porsche Cayenne
Nov 22, 2009 | 2004 Porsche Cayenne
Sep 03, 2009 | 2004 Porsche Cayenne
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: