Question about Toyota Cars & Trucks

Open Question

Drive belt replacement procedure for a 2007 toyota matrix 1.8

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: Toyota Matrix 05/Auto.

What does the noise sound like? Does it increase w/ engine speed? It could be a bearing in the alternator, water pump, p.s. pump, belt tensioner pulley, etc. You can try to locate it by using a piece of wood (or long screwdriver) and VERY CAREFULLY touch it to the different components under the hood w/ car running, w/ your ear against the screwdriver handle, or piece of wood (VERY carefully due to many moving pulleys and belt(s) and hot components).

Posted on Mar 23, 2009

ourhowse
  • 2007 Answers

SOURCE: 2005 toyota matrix routing for serpentine belt

Start with it around the crankshaft, and then just go flat sides to flat sides, and ribs to ribs, and work your way around.

Posted on Jul 06, 2009

c17hydro
  • 2984 Answers

SOURCE: how to replace serpentine belt on toyota matrix

2003–06 1zz-FE Engine & 2003 2zz-FE Engine

  1. Disconnect the negative battery cable.
  2. Use a wrench and rotate the belt tensioner clockwise.
f81e9e7.gif
Use a wrench and rotate the belt tensioner clockwise—2003–06 1ZZ-FE engine and 2003 2ZZ-FE engine

  1. With pressure applied to the wrench, and tension relieved from the drive belt, remove the accessory drive belt.
To install:
  1. Raise and safely support the vehicle.
  2. Remove the right side lower engine splash shield.
  3. Properly route and install the accessory drive belt onto the drive pulleys.
  4. Use a wrench and rotate the belt tensioner clockwise.
bf314d5.gif
Use a wrench and rotate the belt tensioner clockwise.

  1. With pressure applied to the wrench, install the accessory drive belt.
  2. With the accessory drive belt installed properly, release the belt tensioner.
  3. Install the right side lower engine splash shield.
  4. Connect the negative battery cable. Tighten the battery cable bolt to 11 ft. lbs. (15 Nm).

Posted on Oct 11, 2009

old marine
  • 1923 Answers

SOURCE: I have a 2003 toyota matrix that I need directions

If you have air conditioning, this diagram from Dayco should be the one

82a446d.jpg

Posted on Nov 04, 2009

michigan man
  • 3533 Answers

SOURCE: i need a diagram to replace belt on 2007 matrix

for the most part there is a diagram under the hood showing you how the belt goes but give this website a try drive belt diagram www.webcrawler.com wish you the best of luck Michigan Man.

Posted on Feb 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HDo I remove and install an idler pulley on a 2005 Toyota Camry?


How to replace drive belt tensioner Toyota Camry - YouTube

? 4:26
https://www.youtube.com/watch?v=gfSJvN-CE2E
Feb 22, 2013 - Uploaded by Fix It Angel
2002 2003 2004 2005 2006 2007 2008 2009 Toyota Camry. Engine, 4 cylinder, 2.4L, 2AZ-FE. 2004 Toyota ...

Idler Pulley, How to replace (EASY and CHEAP) - YouTube

? 4:56
https://www.youtube.com/watch?v=axAltpW8wR4
Nov 2, 2013 - Uploaded by ChrisFix
Idler pulley squeak? Learn how to fix a squeaky pulley in your car. The serpentine belt in your car powers the ...

2007 Camry Serpentine Belt Replace - 4 Cyl, 2.4 liter ...

? 4:21
https://www.youtube.com/watch?v=ejhyCrh96a8
Jan 13, 2013 - Uploaded by Flyin Brian
I show you step-by step how to get the old belt off and install a new ... ... Water pump replacement 2007 Toyota ...


Jan 27, 2016 | Toyota Cars & Trucks

1 Answer

How do I release the tension in the belt that drives the alternator in a 2007 Toyota Highlander V6?


most have a long bolt behind and you loosen of the centre nut so that the bolt behind can move the shaft
ON some v6 engines the tensioner is spring mounted and there is a 1/2 square drive in the front or the bracket
get a long handled 1/2 " strong bar, put the square in the hole and lift the pulley off the belt

May 29, 2015 | 2007 Toyota Highlander

1 Answer

I was able to remove the serpentine belt from my 2007 toyota matrix but having a hard time installing the new belt. Pls help me !


try to find the belt tensioner then loosen it put new belt on, adjusst so there is a little bit of free play then start it up. If it makes loud screeching loises tighten the belt tensioner

Mar 23, 2011 | Toyota Matrix Cars & Trucks

1 Answer

Where is the inertia switch for a 2007 Toyota Matrix?


I searched my resources under 'inertia' and came up with Safety Belts.
Some people think that their cars have a fuel inertia switch, but it doesn't appear this one has that (unlike a Ford).
Safety Belts In crashes, people need to be retained within the occupant compartment and not be ejected, as to reduce the likelihood of serious injury. Lap and shoulder belts play an important role in this. In effect, they retain you to the occupant compartment so you decelerate with it instead of slamming into hard interior surfaces. But not all belt designs are the same. Some are easier and more comfortable to use . This is important because a comfortable belt is more likely to be used every trip. Choose a vehicle with belts that comfortably fit you and your family, and wear them. All new passenger cars have shoulder belts on inertia reels that allow upper body movement during normal driving but lock during hard braking. Some cars have a second lock, too. You can test this by tugging sharply on a belt. If it locks, it's dual locking. Some vehicles have tensioners that activate in more serious frontal crashes to reduce belt slack which, in turn, reduces the risk of head and chest impacts with hard interior surfaces.

Jul 21, 2010 | 2006 Toyota Matrix

1 Answer

Serpentine belt diagram


ONB UNDERSIDE OF HOOD OR ON TOP OF CORE SUPPORT

Jun 28, 2010 | Toyota Matrix Cars & Trucks

1 Answer

I need a diagram to replace belt on 2007 matrix


for the most part there is a diagram under the hood showing you how the belt goes but give this website a try drive belt diagram www.webcrawler.com wish you the best of luck Michigan Man.

Feb 15, 2010 | 2006 Toyota Matrix

1 Answer

How to replace serpentine belt on toyota matrix 2003


2003–06 1zz-FE Engine & 2003 2zz-FE Engine
  1. Disconnect the negative battery cable.
  2. Use a wrench and rotate the belt tensioner clockwise.
f81e9e7.gif
Use a wrench and rotate the belt tensioner clockwise—2003–06 1ZZ-FE engine and 2003 2ZZ-FE engine

  1. With pressure applied to the wrench, and tension relieved from the drive belt, remove the accessory drive belt.
To install:
  1. Raise and safely support the vehicle.
  2. Remove the right side lower engine splash shield.
  3. Properly route and install the accessory drive belt onto the drive pulleys.
  4. Use a wrench and rotate the belt tensioner clockwise.
bf314d5.gif
Use a wrench and rotate the belt tensioner clockwise.

  1. With pressure applied to the wrench, install the accessory drive belt.
  2. With the accessory drive belt installed properly, release the belt tensioner.
  3. Install the right side lower engine splash shield.
  4. Connect the negative battery cable. Tighten the battery cable bolt to 11 ft. lbs. (15 Nm).

Oct 11, 2009 | 2003 Toyota Matrix

1 Answer

2006 Toyota Matrix


uses 19 milimiter wrench or socket if fit move and py attention to the diag

Feb 26, 2009 | 2006 Toyota Matrix

1 Answer

A question


Hi there the recomended timing belt replacement is 100000kms or 63000 miles

Jan 23, 2009 | 2005 Toyota Matrix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

720 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...