Question about 2008 Chevrolet Uplander

Open Question

How to change passenger sliding door handle - 2008 Chevrolet Uplander

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: side sliding door

The trick is that there is a small clip holding the inside handle in place. Push the panel in and grab it with small needle nose or forceps.

Then remove all the interior panels.

There are seven torx screws holding the intern latch into the door frame, and three interconnecting bars between the outer and inner inner handles.

Once you have the ability to move the inner assemble around you can get to the two metric nuts holding the exterior handle.

The lock assembly is removed by depressing the metal latch on the bottom of the handle assemble after the handle is fully removed.

Reverse and replace and that's it. (don't for get to have extra plastic door panel clips as they will break as you remove the interior panels)

Overall - I would suggest to just take it to the dealer or to a body shop. I'm told they would do it for about $75. I took about 2 hrs to do this and if you are even a bit shaky and drop anything into the door, it is game over. Next time I will do the dealer thing.





Posted on Feb 07, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sliding door latch


Can you pull on the release handle and use a screwdriver to change the position of the latch?

Jul 15, 2012 | 1995 Dodge Grand Caravan

1 Answer

1999 Eurovan sliding door won't open


Did you ever get the sliding door handle fixed? I have the exact same problem and would love to know how you fixed it. Please email me at sharpmail@verizon.net thanks!

Apr 24, 2012 | Volkswagen Eurovan Cars & Trucks

1 Answer

I can only open the Front Passenger door from the outside. It will not open from the inside. I am talking about the front passenger door not the sliding door. It seems as though its not grabbing...


The linkage system, from the door handle to the door latch, is disconnected somewhere, or broken. The door panel has to be removed, the linkage system have to be inspected, any the faulty part has to be replaced, and riconnect the linkage to the door handle and the door latch.

Nov 14, 2010 | 2007 Honda Odyssey

1 Answer

Describe how to change the passenger mirror on a 2007 Toyota Sien


Hi, First remove the door panel. (The connector for the mirror is behind the panel just to the left of the door handle.) The arm rest cover pops off by gently prying upward at the corners near the door panel and along the outer edge of the arm rest. Then remove the 2 screws. Remove the screw that holds the door handle bezel on. Remove the little plastic plug to the left of the door handle as well. This reveals yet another screw to remove. Now you can gently pull the door panel away from the door. The little plastic clips will pop out of the door. If they come away from the door panel they easily fit back in place in the metal retainers built into the door panel. You can now disconnect the connector and remove the 3 10mm mirror bolts.
With respect to the door handle bezel on the inside of the door, to remove it you must pull/slide the bezel away from the door hinge. It should move an 1/8 to 1/4 inch. There is a little tab that hooks inside the door handle mechanism and two small holes, top and bottom, that slip over little pegs on the mechanism. I broke this tab while removing the bezel on my car. This was the most difficult part, on my car, to remove.
Take care

Jul 23, 2010 | 2007 Toyota Sienna

1 Answer

I recently purchased a used 03 Chevy Venture van. The passenger sliding door doesn't open. It worked for 1 week and stopped. The driver side sliding door has a broken handle so I'm able to open that door...


Pain but fixable. Sounds like the linkage is not connected. Even a mechanic will have to remove the door panel and fight with it. If you can remove the rear seat from the drivers side side door then you might have room to remove the passenger side door panel to fix it. Usually clips are the first thing to break on door handle/latch linkages

Apr 06, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

I have also broke off my 2001 Nissan Quest sliding door handle on the driver side. Also the sliding door cannot be opened from interior... Any help is appreciated... Thanks


the child lock rod may have been extended...
open the driver side door, and with a skinny finger, push that child lock rod back in towards the rear of the sliding door
use the passenger side as reference
once you pushed it in, you can now open it from the inside handle

Oct 06, 2009 | 2001 Nissan Quest

1 Answer

Rear passenger window just slides how do I get the door panel off


Well first take the mirror cover off. Then the roll up window handle if its manual. There is a star head behind the handle to open the door, remove that and unplug all wiring.Then behind the handle to close the door there is a cover, it has 2 screws, take those out and the rest is just plastic door clips just pull away from the door and they will start coming off.

Mar 12, 2009 | 2000 Chevrolet Malibu

2 Answers

Mazda 5 replacing external handle on sliding door


Your door should be held on with clips. Removing the panel is sometimes hard, just take a good WIDE flat head screwdriver, and whatever tool needed to remove the screws holding the panel on, and be careful. Check underneath the panel, by the inside handle, and the arm point for screws. Once removed, take your WIDE screw driver, and don't quite pry them off, more or less try to get it underneath and pull towards yourself. There is no real easy way, just try to be patient with it, and if you hit any binds, look for more screws, its just a matter of patience for sure.

Feb 13, 2009 | 2006 Mazda 5

2 Answers

Broken exterior door handle,passenger sider ,sliding


Got this idea from mpvclub.com: Get some stainless or aluminum sheet metal screws, drill pilot hole into the handle and into the receiving part behind, then screw in the screw. Do on both sides of handle (get appropriate length screw.) When done, get some putty or hardener to fill in the screw slot, let dry, then sand smooth, then paint with body color. Result is great and inexpensive.

Jan 26, 2009 | 2004 Mazda MPV

2 Answers

Kia Door Handle


Remove the door trim inside by loosen 3 bolt with screw driver, then pull out the door trim, after that loosen the hex.bolt (3 hex-bolt) on lock mechanism bracket, after that you can loose bolt (4 hex bolt) on handle cover. Be careful to not drop the bolt, because the gap on sliding door is too narrow. After you removing the handle assembly you can see where is the broken. You can remove the handle from cover by removing pin clips on it. To fixing the broken handle you can just using plastic glue or you can drill a small hole and put some small wire to reinforce the plastic.


Oct 16, 2008 | 2003 Kia Sedona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...