Question about Cars & Trucks

Open Question

How do i replace headlight bulbs in my 2011 gmc sierra denali

Halogen bulbs

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Replace 2005 GMC Sierra Daytime Running Lights...

Open the hood, and in the top right and left corners of the primary headlamps you'll see two pins (L shaped) swing them out (towards the front of the truck) and lift out. This allows you to remove the upper headlamp assembly. You can then remove the lower assembly by pushing outwards on the plastic clip that is hooked into a metal clip. Once it's out you just turn the bulb to remove it.

It's much easier if you unhook the leads to the upper assembly's bulbes so you can set the whole thing aside.

Posted on Mar 31, 2009

wireguy212
  • 1627 Answers

SOURCE: how do you change a headlight in a 2007 gmc sierra

There should be two L shaped rod on the top of the headlight buckets that you need to lift and remove.Then you can pull the whole assembly out and replace the bulbs.

Posted on Nov 14, 2009

wyno62
  • 364 Answers

SOURCE: How do you change the halogen bulb in the

under the hood there will be a large, plastic weather cover to unscew by hand, remove the 3 pin connecting plug, there will be a spring loaded clip holding in the globe, depress the looped end and divert it over to one side thsi will release the globe, assembly is in reverse, be careful as not to touch the end og the globe, as the oil on your fingers are detremental to its operation. No special tools required to do this. Good luck

Posted on Nov 20, 2009

michigan man
  • 3533 Answers

SOURCE: Trying to replace a headlight bulb in a 2007

give these websites a try www.autozone.com and www.alldatadiy.com wish you the best Michigan Man.

Posted on Nov 23, 2009

Testimonial: "Thaks for that info. looking at computer for hours. that solved it."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change running light


"You Tube" will have a video just for you. Punch in your information and I am sure there will be an answer there for you.

Nov 26, 2015 | 2012 GMC Acadia SL 4dr SUV 3.6L V6 6-speed...

1 Answer

Bright went out after replacing the headlight


Replace with new bulb you must not touch the glass part of the bulb.oils from fingers will cause it to burn out, also make sure that there is no condensation inside of the bulb housing as this will cause the bulb to short out and possibly cause a fire

Apr 07, 2014 | 1999 GMC Sierra 3500

1 Answer

2011 gmc sierra 1500 left headlight out. replaced bulb twice but still out. right side and both high beams work fine


Check for power at the socket. If you have power there bulb is not making good contact.

Nov 30, 2013 | 2008 GMC Sierra 2500HD 2WD

1 Answer

I have a headlight out on my 2005 GMC Sierra Denali, how do I fix it?


Open the hood looking down at the top of the radiator support you will see two metal rods that go down through the support and through the head lamp assembly. turn the l shaped top out from under the retainer and lift them up and out. Now the headlamp should be free to pull out to get to the back of the assembly.

Many autoparts stores will assist you in changing the bulb if you purchase the bulb from them. J.

Sep 25, 2010 | 2005 GMC Sierra Denali

1 Answer

I have a 2002 gmc sierra z71. The headlights just stopped working. I have checked the relay/fuse under the hood and it's working. Can you help.


Check the head light switch itself and also the halogen bulbs and there electrical contacts.
Not uncommon for a headlight switch to fry out, is uncommon for both headlight bulbs to go bad at the same time unless someone spiked the electrical system with something as weird as incorrectly hooking up jumper cables and back feeding other components.

Aug 12, 2010 | 2002 GMC Sierra

2 Answers

How to replace headlight on 2007 gmc acadia


first if you are changing the bulb only and it is a HALOGEN
there is a round acess hole in the inner fender remove it and change the bulb
if you have HID lights or are changing the head light assembly then you have to remove the front bumper facia
hope this helps
hope you have HALOGEN lights

Feb 11, 2010 | 2007 GMC Acadia SLE

1 Answer

How do you change a headlight in a 2007 gmc sierra denali cant get my hand in the there too much stuff in the way


There should be two L shaped rod on the top of the headlight buckets that you need to lift and remove.Then you can pull the whole assembly out and replace the bulbs.

Nov 13, 2009 | 2007 GMC Sierra Classic Denali

1 Answer

Change head light


You should be able to reach under the hood into the headlight assembly and grab the bulbs and twist them off if not then you have to take off your entire headlight assembly then take the bulbs out.

Feb 25, 2009 | 2007 GMC Sierra Classic Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...