Question about Cars & Trucks

Open Question

My daughters 2002 chevy tracker proportioning valve with no abs stopped anyone know where i can i get one please?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
fastboyz
  • 674 Answers

SOURCE: did brake job on 1992 chevy pickup, how do I release proportional valve?

some times you get an air bubble and you just cant get it to pass. you can work very hard and still not get it to bleed. snapon sells a bleeder system that sell for around $500 but i can tell you how to build one for under $20. if interested. but your answere is to back bleed the system from the farthest away wheel first. and then your peddel will come back.

Posted on Aug 23, 2008

Ad
cmccune04
  • 213 Answers

SOURCE: Rear Brake Proportioning Valve

Used GEO Parts Leads May 28, 2008 (i.e. Wheel, Seat Belt) 1990 GEO Tracker, SUV, 4-Cyl, Gas/Carburetor, Automatic, 4x4, Any Brakes, Rear, Brake Proportioning Valve which mounts on rear axle (Raleigh, North Carolina ...
www.automotix.net/20080528-used-geo-parts.html


Copy this link I found it on a google search and thought of you>

Posted on Dec 21, 2008

c17hydro
  • 2984 Answers

SOURCE: 1989 chevy caprice proportioning valve

The proportioning valve can be mounted on the frame or just off of the master cylinder. Yes, you can buy aftermarket and no you don't have to stay OEM on it.

Posted on Mar 26, 2009

askjhuber
  • 59 Answers

SOURCE: Where can I find a brake proportioning valve for my 97 S-10?

When people tell me they hate there ABS, alot of people who pull trailer do. I tell them just to pull the fuse this will stop them completely. Yeah theres a light ont he dash but that can alos be delt with by removing the bulb for it. But int he long run just pulling the fuse is quick and Free.

Posted on May 17, 2009

  • 599 Answers

SOURCE: the ABS/proportioning valve is not working.

these trucks need a seperate bleed procedure for ABS you need a scanner to put it into this bleed mode,hope this helps if not get back to me and we'll go from there. please rate my fix as i strive to be the best

Posted on May 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could be the problem when I aply brakes pedal gets real hard where car wont stop when braking coming to a stop brk. light and abs lights on


Hey Joes, 1 problem at a time ,if brake light is coming on that is in the proportion valve ,did you have to push reset button to make light go out,? if the ABS lite is coming on what you can do to check and see if that is the problem is unplug it and try brakes ,it will deactivate ABS and give you normal braking and ABS light will be on ,see if symptyms change , also did you reset ABS sensors to the tone wheel when you replaced rotors ? I don't know what you have and I have seen some cars need a importaint reset procedure for abs to work properly. good luck I hope I gave you some good things to look at that help you.
Woody

Oct 28, 2014 | Cars & Trucks

1 Answer

Proportioning Valve 87 Chevy Celebrity


Usually if the car has a valve it is mounted on the firewall. But your master cylinder has 4 connections, one for each wheel. So I doubt your car has a separate proportioning valve. You could check with the dealer to verify.

Jul 12, 2013 | 1987 Chevrolet Celebrity

1 Answer

What kind of oxygen sensor is need for a 2002 Chevy Tracker


Since you said 4 sensors I will assume you have the V6 engine.
The aftermarket sensors that are designed to fit your truck are about $150 each so with labor that would be about right. And sensors from GM would probably be $250 each.
However, odds are you do not need all 4 sensors. Maybe one.

Jul 27, 2012 | 2002 Chevrolet Tracker

1 Answer

Brake fluid does not flow to back wheels. I replaced lines


bleed master cyl ,abs, and check proportioning valve, proportioning valve if stuck will stop flow to back etc

Jul 25, 2010 | 1994 Buick Roadmaster

3 Answers

My abs light stays on 1995 chevy G20 van and have to replace front brakes every 6 months but rear brakes show no wear and are atleast 3 yrs old. On slick pavement right front brake sometimes locks when...


I'd be checking the sensor (ABS) at that wheel, (right front) and adjusting rear brakes to proper clearance, as well as inspect them for proper operation with wheels off.

Jul 22, 2009 | 1995 Chevrolet G20

1 Answer

The ABS/proportioning valve is not working.


these trucks need a seperate bleed procedure for ABS you need a scanner to put it into this bleed mode,hope this helps if not get back to me and we'll go from there. please rate my fix as i strive to be the best

May 19, 2009 | 1997 Chevrolet Blazer

1 Answer

Where can I find a brake proportioning valve for my 97 S-10?


When people tell me they hate there ABS, alot of people who pull trailer do. I tell them just to pull the fuse this will stop them completely. Yeah theres a light ont he dash but that can alos be delt with by removing the bulb for it. But int he long run just pulling the fuse is quick and Free.

May 17, 2009 | 1997 Chevrolet Blazer

1 Answer

NO REAR BRAKES


I would check the proportional valve.

Jan 19, 2009 | 2002 Chevrolet Express

2 Answers

Rear Brake Proportioning Valve


did you ask GM (trackers are GM) not all parts are same GM tracker to sidekicks ( i can name many)
suzuki sells it. and try car-parts.com for wrecker used sources.
used brakes , hummmmmm

96 is a major year, change, so watch out of wrong answers.
there are 2 valve, 2door and 4
suz pn is.
4 = 51930-56B20
2 = 51930-60A40

dont by the wrong one, or danger awaits you. and thin wallet.

1 of 2 valves here.
http://www.oemsuzukiparts.com/parts/index.cfm?make=Suzuki&year=&searchText=51930-56B20&action=oePartSearch&siteid=214330

Nov 14, 2008 | 1996 Geo Tracker 2 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...