Question about Dodge Cars & Trucks

Open Question

Location of transfer case control module 2004 dodge dakota

3.7 engine

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 333 Answers

SOURCE: where is the transfer case control module located

It is located under the driver side dash, on the steering column. See diagram below:
0d1bdaa.gif

Posted on Oct 18, 2009

Ad
  • 5370 Answers

SOURCE: where is the transfer case

The transmission control module and the transfer case control module are separate parts. The transmission control module is mounted under the hood and controls only transmission functions. The transfer case control module controls only the transfer case, and is located inside the truck. If you remove the trim panel under the steering column you will find the transfer case control module mounted just to the right of the opening.


The shift motor is located just behind the axle tube to prevent damage.
There is a shift motor on the right front axle that is vacuum operated.
The shift motor (1) is an electromechanical device consisting of a DC permanent magnet motor, a motor brake, a gear train and an analog position sensor. The shift motors' overall function is to move and lock a gear that moves the mode fork found in the transfer case. This allows the transfer case to be shifted electrically to multiple operating positions (4LOCK and AWD). The operating current of the shift motor under
stall conditions is 30 amps maximum at 72° F with 13.5 volts, at the motor leads.
OPERATION
Shifting in the transfer case occurs when the shift motor brake is released and a Pulse Width Modulated (PWM) voltage is supplied to the shift motor by the Front Control Module (FCM). A linear analog position sensor located inside the shift motor, provides the FCM with the motors' angular, rotational position. With this information, the FCM
continuously knows the motors' position, and therefore allows it to accurately control the motors' operation, including voltage polarity which is used to control motor direction.

REMOVAL :---Note: New shift motor assemblies are shipped in the AWD position. If a new shift motor assembly must be installed, it will be necessary to shift the transfer case to the AWD position prior to motor installation.
Raise the vehicle on a suitable hoist.Remove the front propeller shaft. Disengage the wiring connectors from the shift motor and mode sensor.Remove the front output shaft companion flange from the transfer case.Remove the bolts (Remove the Shift Motor and Mode Sensor Assembly Bolts) holding the shift motor and mode sensor assembly onto the transfer case.Separate the shift motor and mode sensor assembly from the transfer case. See fig below:-- helpmech_19.gif
1 - TRANSFER CASE.2 - SHIFT MOTOR AND MODE SENSOR ASSEMBLY.3 - BOLT.-- This should help.Thanks.Helpmech.

Posted on Feb 26, 2011

autoacworks
  • 120 Answers

SOURCE: Where is the ECU on a 1999 Dodge Dakota Sport with

mounted to right side inner fender under the hood.

Posted on Jun 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Dodge Dakota 4x4 SLT Body Control Module location


I have a manual for a 2004 Dakota that is probably similar to the 2006 electrically. Dodge never called it a Body Control Module; earlier models did have the Central Timer Module (CTM) which functioned like Body Control Modules in other manufacturers vehicles.
In 2004, the CTM was replaced by the Integrated Power Module (IPM), which consists of the Front Control Module and Power Distribution Center, and is located next to the battery on the left inner fenderwell (the Front Control Module is underneath the Power Distribution Center, where you will find relays and fuses). There are several other modules which control various functions, and they communicate with each other through the Programmable Communication Interface (PCI) bus circuit, also called J1850.
The Front Control Module controls all exterior lights, except brake lights and turn signals, and the windshield wiper functions. Other modules (PCM, TCM, antilock brakes, heated seats, instrument cluster, power locks/power windows/power mirrors, etc) control other functions, but all communicate through the PCI bus.

Nov 08, 2016 | 2006 Dodge Dakota

1 Answer

DOES A 1990 DODGE DAKOTA HAVE A 4 WHEEL DRIVE ACTUATOR? IF NOT, WHAT ENGAGES THE 4 WD?


If it is electronic activated 4 WD, this system has a transfer case control module located in the dash behind the climate controls.It can go bad and cause the system not to engage the 4WD. May want to check power and ground to the module first.

Feb 23, 2015 | Dodge Cars & Trucks

1 Answer

Location of transfer case control module 2002 ford explorer sport trac


It's located behind the Passenger side kick panel. Easy to access since the kick panel only has one plastic clip holding it in place and the 4x4CM has two 7mm hex head screws holding it in place.

Oct 30, 2012 | 2002 Dodge Dakota Club Cab

1 Answer

Where is the ignition control module located on a 1991 Dodge Dakota?


Hello
The ignition control module is part of the ECM engine computer which is located under the hood.

Nov 01, 2011 | 1991 Dodge Dakota

1 Answer

Where is the transfer case shift motor located on 2004 dodge dakota


The transmission control module and the transfer case control module are separate parts. The transmission control module is mounted under the hood and controls only transmission functions. The transfer case control module controls only the transfer case, and is located inside the truck. If you remove the trim panel under the steering column you will find the transfer case control module mounted just to the right of the opening.


The shift motor is located just behind the axle tube to prevent damage.
There is a shift motor on the right front axle that is vacuum operated.
The shift motor (1) is an electromechanical device consisting of a DC permanent magnet motor, a motor brake, a gear train and an analog position sensor. The shift motors' overall function is to move and lock a gear that moves the mode fork found in the transfer case. This allows the transfer case to be shifted electrically to multiple operating positions (4LOCK and AWD). The operating current of the shift motor under
stall conditions is 30 amps maximum at 72° F with 13.5 volts, at the motor leads.
OPERATION
Shifting in the transfer case occurs when the shift motor brake is released and a Pulse Width Modulated (PWM) voltage is supplied to the shift motor by the Front Control Module (FCM). A linear analog position sensor located inside the shift motor, provides the FCM with the motors' angular, rotational position. With this information, the FCM
continuously knows the motors' position, and therefore allows it to accurately control the motors' operation, including voltage polarity which is used to control motor direction.

REMOVAL :---Note: New shift motor assemblies are shipped in the AWD position. If a new shift motor assembly must be installed, it will be necessary to shift the transfer case to the AWD position prior to motor installation.
Raise the vehicle on a suitable hoist.Remove the front propeller shaft. Disengage the wiring connectors from the shift motor and mode sensor.Remove the front output shaft companion flange from the transfer case.Remove the bolts (Remove the Shift Motor and Mode Sensor Assembly Bolts) holding the shift motor and mode sensor assembly onto the transfer case.Separate the shift motor and mode sensor assembly from the transfer case. See fig below:-- helpmech_19.gif
1 - TRANSFER CASE.2 - SHIFT MOTOR AND MODE SENSOR ASSEMBLY.3 - BOLT.-- This should help.Thanks.Helpmech.

Feb 26, 2011 | 2004 Dodge Dakota

2 Answers

Location of the throttle position sensor


the censor is located adjacent to the throttle control linkage, and has a 3 wire connection plug

May 30, 2010 | 2004 Dodge Dakota

1 Answer

2001 Dakota: four wheel drive will not engage and windshield wi...


4x4 issue could be either the TCCM Transfer Case Control Module, or the transfer case shift motor.

When you turn your dash switch from 2wd to 4HI, can you hear the shift motor underneath operating?

May 17, 2010 | 2001 Dodge Dakota

1 Answer

Where is the transfer case control module located on a 2002 dodge dakota 4.7L?


It is located under the driver side dash, on the steering column. See diagram below:
0d1bdaa.gif

Oct 18, 2009 | 2002 Dodge Dakota Club Cab

1 Answer

2004 dakota won't start


sounds like a crankshaft position sensor..fairly common problem on these 3.7 engines..check for fault codes in engine controller..can mbe hard to get out of engine block..seize in..sometimes have to come out in pieces..it is located on passenger side rear of engine..1 bolt holds it in..3 wire connector..below exhaust manifold in side of block..fairly inexpensive part..recommend dealer part

Apr 26, 2009 | 2004 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...