Question about 2005 Chrysler 300

Open Question

Cruise control not working on my chrysler 300 2005

Cruise control not working and abs light on

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

taran_2005
  • 10515 Answers

SOURCE: 2005 Chrysler 300 thermostat location?

Hi,

In your Model :-

The automotive thermostat is a temperature controlled on and off valve. When the temperature rises to a predetermined temperature, the thermostat opens up to allow the engine coolant to flow through the cylinder block and the radiator. This flow is crucial to maintain optimum operating temperature for fuel efficiency, enhanced driveability, and engine protection. The coolant flow is reduced when the engine is cold, and the flow is increased when the engine is hot. Contrary to popular opinion, operating the vehicle without the thermostat doesn't make the engine run cooler. It will actually run hotter because there isn't a thermostat to slow the coolant flow. This means the coolant doesn't stay in the radiator long enough to dissipate its heat.

TO TEST THERMOSTAT

There are several ways to test the opening temperature of a thermostat.
One method does not require that the thermostat be removed from the engine.

  • Remove the radiator pressure cap from a cool radiator and insert a thermometer into the coolant.
  • Start the engine and let it warm up. Watch the thermometer and the surface of the coolant.
  • When the coolant begins to flow, this indicates the thermostat has started to open.
  • The reading on the thermometer indicates the opening temperature of the thermostat.
  • If the engine is cold and coolant circulates, this indicates the thermostat is stuck open and must be replaced.
The other way to test a thermostat is to remove it.
  • Suspend the thermostat completely submerged in a small container of water so it does not touch the bottom.
  • Place a thermometer in the water so it does not touch the container and only measures water temperature.
  • Heat the water.
  • When the thermostat valve barely begins to open, read the thermometer. This is the opening temperature of this particular thermostat.
  • If the valve stays open after the thermostat is removed from the water, the thermostat is defective and must be replaced.
  • Several types of commercial testers are available. When using such a tester, be sure to follow the manufacturer's instructions.
  • Markings on the thermostat normally indicate which end should face toward the radiator. Regardless of the markings, the sensored end must always be installed toward the engine.
  • When replacing the thermostat, also replace the gasket that seals the thermostat in place and is positioned between the water outlet casting and the engine block.
4fa3f4e.jpg


Positioning a thermostat into an engine.
  • Generally, these gaskets are made of a composition fiber material and are die-cut to match the thermostat opening and mounting bolt configuration of the water outlet.
  • Thermostat gaskets generally come with or without an adhesive backing. The adhesive backing of gaskets holds the thermostat securely centered in the mounting flange, leaving both hands of the technician free to align and bolt the thermostat securely in place.

TO REPLACE THERMOSTAT

CAUTION
If the radiator is filled to the top with coolant and the engine is run without the radiator cap in place, the coolant will expand and spill over as the engine warms up.
  • Drain some coolant into a clean container until the coolant level is below the thermostat housing.
  • Remove the upper radiator hose connection from the thermostat housing.
  • Loosen the housing bolts and remove the housing.
  • Remove the gasket and scrape it carefully from the surface of the housing and the mounting surface on the engine. If the gasket remains on either of the surfaces, there will probably bea coolant leak after reassembly. Some engines use a rubber O-ring to seal a thermostat housing.
  • Compare the size of the thermostat to the old one. They are of different sizes, types, and temperature ratings.
  • The temperature rating is stamped on the sensing bulb on the bottom of the thermostat. The temperature bulb faces the block.
  • When replacing a thermostat, be sure that the thermostat fits into the groove in the block or outlet housing. If the thermostat is installed upside down, the engine will overheat.
  • Install the gasket.
  • Reinstall the thermostat housing. Refill the system and run the engine or pressure test to check for leaks.
  • When the engine has reached operating temperature make sure the thermostat opens.
  • You should be able to see coolant circulating within the radiator.
  • Another way of checking thermostat operation is to feel the top of the radiator hose or use a thermometer or multimeter with a temperature probe to confirm that the coolant is warming up.
  • If the engine is overheating, but the top hose is still cool to the touch, the thermostat is stuck closed and must be replaced.
NOTE When a paper gasket is used and the recess is in the thermostat housing, it is a good practice to position the thermostat into the recess and glue the gasket to hold it in place. If it falls out of its groove during installation, the outlet housing can be cracked or a coolant leak will result. Before tightening the water outlet housing, try to rock it back and forth to be sure it is flush. Housings are often cracked during this step.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!



Posted on Oct 07, 2009

greg_margo
  • 1959 Answers

SOURCE: Service Engine Light flashes-Chrysler 300

The fact that the service engine light came on indicates a fault has been recorded. Most chain auto parts stores have complimentary diagnostic tests that will determine the fault code. Depending on what the code(s) is will determine the course of action. Considering a diagnostic test at a dealer runs $75 and up, I'd get the free test to get the codes. From there it may be a simple fix (i.e. tightening gas cap if u just got gas etc)

Posted on Nov 04, 2009

Testimonial: "Thank you. You gave me some great things to go on if it flashes again."

wracefans24
  • 1985 Answers

SOURCE: why do the lights in my 2005 chrysler 300

you didn't say which lights,
if your talking about dash light flickering,it is usually a sign of a low charged battery,on one on its way out.

Posted on Dec 08, 2009

Testimonial: "Yeah the dash lights and headlights flicker!!! Thank you very much for your advice.. Really appreciate it."

  • 396 Answers

SOURCE: Engine light and ABS traction control light remain

The ABS sensor is a speed sensor also for Traction Control. This is why both lights are on , One of your front ABS sensors are bad or disconnected, or has a pinched wire.

Posted on Jan 16, 2010

  • 244 Answers

SOURCE: heater blower doesnt work on 2005 chrysler 300

Locate the fuse pannel and check for blown fuse...If fuse not blown - check fan control relay for proper operation - If thats not the problem check for voltage at the switch.

Posted on Feb 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse controls cruise control on a 2009 Dodge Caliber


If there is a problem with the ABS the cruise control is disabled ! you have to fix the ABS problem for the CC to work !

May 29, 2015 | 2009 Dodge Caliber SRT-4

1 Answer

My abs light came on and cruise control stopped working on my 2010 Chrysler sebering


The cruise control will not operate on your vehicle if it senses a brake issue. Have a local auto parts store read out the stored codes from your vehicle's computer to help pinpoint the issue causing the error (likely, a defective ABS unit or a brake fluid leak).

May 06, 2015 | Chrysler Cars & Trucks

1 Answer

2001 impreza Abs light on and cruise control not working


From what I have read the flashing cruse light is to get you to fix the problem. Any cel will throw the cruse light and cruse will not work. Get your abs checked out and cruse will work again when fixed.

Mar 30, 2014 | Subaru Impreza Cars & Trucks

1 Answer

Horn doesn't work,abs light on dash stays on and also cruise control does not work either


Typical reason for no cruise and horn is a bad clock spring underneath the airbag. Typically you have an airbag light on as well and not an abs light

Aug 21, 2012 | 1998 Nissan Quest

1 Answer

2006 Jeep Liberty Diesel, Cruise doesn't work. Cruise, ESP and ABS dash lights on


You must have the systems scanned for fault codes before any reason can for the problem can be given.

Jul 16, 2012 | Cars & Trucks

2 Answers

Cruise control doesn't engage 1999 volvo s80 t6


not a volvo mechanic but on most american cars the abs and stc modules are in direct corilation with the cruise even though the cruise is most likely ran from vacume the disengagement is electrical.

Dec 06, 2008 | 1999 Volvo S80

1 Answer

Left running lamps, cruise control, horn do not operat and air bag dash light on


Hello.Is your ABS light on?Do you hear a click noise when you turn the steering wheel?If it is,you probably have a faulty clockspring. That electronic piece controls all of those things. The clockspring is located behind the steering wheel. You have to remove the steering wheel in order to access the clockspring. MAKE SURE that the steering wheel is straight ahead before you remove it.

Sep 23, 2008 | 1998 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler 300 Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...