Question about 2002 Toyota MR2 Spyder

Open Question

Mr2 spyder replace headlight - 2002 Toyota MR2 Spyder

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: replace antenna on 2003 mr2 spyder

Don't know what you mean by fabric? The antenna is located behind the rear tire molding. By removing the rear tire and then the black liner in the wheel well you can gain full access the the antenna. I removed the power antenna and dis-assembled the housing to remove the broken plastic extender for the antenna mast. I then installed the new mast. It now works like new.

Posted on Aug 29, 2008

Ad
  • 1861 Answers

SOURCE: How to change the parking bulb in 2001 MR2 spyder???

Rotate the bulb base 1/4 turn

Posted on Oct 07, 2008

  • 1 Answer

SOURCE: 2003 MR2 will not idle

I had the same problem. My check engine light was on. Took it to the dealer and they checked the code. It was the throttle control motor failure. The good news is I got the wiring wet and that seem to be the problem. They reset the check engine light and it runs fine now. Bad news is if I had to get the motor replaced they said it would be about $1300.00 I hope things work out for you.

Posted on Oct 18, 2008

emissionwiz
  • 76846 Answers

SOURCE: Aiming headlights

if you don't see little bubble levels near the headlight under the hood then you must have them aligned with an optical aimer, if you do have the bubble guages then park the car on a level pad and set the bubbles to center with the little adjusting screws near them.

Posted on Nov 05, 2008

  • 510 Answers

SOURCE: For a 2001 MR2 Spyder....once the O2 sensor is

Needs a scanner to clear fault code
Go to your local autosparks

Posted on Jan 25, 2010

Testimonial: "Great help...local store can detect, sell ( I install myself) and store can reset...sounds good."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove headlight 2002 toyota mr2


Believe it or not, this is the headache to remove and replace the headlights:

Removal & Installation
  1. Remove the front bumper cover.
  2. Remove the tool box and the luggage compartment trim (carpet).
  3. Remove the 2 bolts and the nut.
  4. Disconnect the connectors, then remove the headlight

c17hydro_152.gif
  1. Front bumper cover removal-MR2



c17hydro_153.gif

To install:

  1. During installation, if the headlight is damaged, it can be reinstalled by installing new retainers.


c17hydro_154.gif

If the headlight is damaged, cut off these retainers



c17hydro_155.gif

Install new headlight retainers

Apr 19, 2011 | 2002 Toyota MR2 Spyder

3 Answers

Mr2 transmission


use only OEM Toyota trans fluid. If there is one lesson I learned with my MR2, its that Toyotas own trans fluid is the best. Yes, its a few dollars more, use it anyway.

As for your top, there is a product called Amazing Roll off. Its for boat canvases and its simply the best thing i've ever used. try it, you wont be disappointed.

Jun 19, 2009 | 2003 Toyota MR2 Spyder

1 Answer

Toyota mr2 spyder repair manual


I got mine from a company called www.electronicmanuals. i think, you can buy it as a download or on a C.D.

Mar 21, 2009 | 2000 Toyota MR2 Spyder

1 Answer

MR2 after 2 mins of starting the smt light comes on.


it sounds like the clutch actuator is worn out.
The clutch actuator has 2 parts:
1. the clutch master cylinder
2. the clutch slave cylinder.

Try to replace the slave cylinder first, and if it is still not solving the problem, then try to replace the clutch master cylinder

Good Luck

Feb 06, 2009 | 2003 Toyota MR2 Spyder

1 Answer

Replace a burned-out bulb or headlight on a 2003 Toyota Camry XLE


I have similar issue with my 03 Camry XLE. I replaced the left side headlight bulb and the light still not coming on. Thanks in advance for the help.

Dec 06, 2008 | 2003 Toyota MR2 Spyder

1 Answer

Aiming headlights


if you don't see little bubble levels near the headlight under the hood then you must have them aligned with an optical aimer, if you do have the bubble guages then park the car on a level pad and set the bubbles to center with the little adjusting screws near them.

Nov 05, 2008 | 2002 Toyota MR2 Spyder

1 Answer

How to replace headlight bulbs on 2001 MR2


The bulbs come out from behind the lamp assemblies, unplug the connector and turn it 1/4 turn.

Oct 05, 2008 | 2003 Toyota MR2 Spyder

1 Answer

How to replace headlight bulbs on 2003 MR2


Each bulb is individual. No need to replace the assembly.

Sep 28, 2008 | 2003 Toyota MR2 Spyder

Not finding what you are looking for?
2002 Toyota MR2 Spyder Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...