Question about Cars & Trucks

Open Question

Vw transporter 174 camshaft change now wont start?

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
kirkx
  • 2019 Answers

SOURCE: hi i have a 2004 vw t5 transporter 174 kombi when

Check the engine codes at Autozone or a place like that. Then check fuel pressure, change fuel filter, and listen for hissing when you remove the gas cap, from a possible bad purge valve.
Final advice is to try a slightly smaller spark plug gap, because it will not blow out the spark as easily when under load.

Posted on Apr 12, 2010

Ad
  • 271 Answers

SOURCE: VW transporter,1.9 TD 1998 ABL wont start

Your problem is located behind the ignition switch.Remove the covers of a steering column behind the steering wheel.There is 5 or 6 wires around on black or white plastic switch.Change it.ATT ! Before removing the steering wheel disconect the battery and wait for at list 10 min. to deactivate the SRS airbags.

Posted on Jun 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When did the vw transporter be come computureised my is a 1997


Computer has no impact on starting an engine by pushing it by using the manual transmission and the clutch. If it cranks and wont start normally, pushing it wont do anything to start it either.

Feb 18, 2017 | Cars & Trucks

2 Answers

Remove alternator vw transporter t28 tdi


You will see the bolts holding the alternator in place. In most cases no more than three to remove. Before starting the replacment disconnect battery.............hope this help and good luck.....Please rate this.

Aug 14, 2012 | Cars & Trucks

1 Answer

Vw sharan 2002 it will run for 5 or 6 miles then start to miss firer then cut out then it wont start for ages after.


Classic symptoms of a failing crankshaft or camshaft sensor. More common failure is the crankshaft sensor.

May 29, 2011 | Volkswagen GLI Cars & Trucks

1 Answer

Ford Windstar 2003 emission light on code 171 174?


Hello, symptoms of a faulty Camshaft Position Sensor can include hard starting (or no starting), rough running/misfiring and/or loss of power.

Code 340 COULD be caused solely by a faulty Camshaft Position Sensor. However, this code refers to the entire circuit. So, replacing the sensor may not fix the issue. The problem could lie in any part of the circuit - the sensor itself, the wiring, or the PCM.

Codes 171 and 174 typically appear together. They are caused by the 02 sensors reading too much air (lean) in the exhaust. In most cases, simply cleaning the MAF sensor does the trick. I typically take it off and spray it with electronics or brake cleaner. Just make sure it dries before reinstalling. If this doesn't eliminate the codes, inspect all vacuum and PCV hoses, check for a dirty fuel filter and ensure the furl pressure is within limits.

For clarification, the first trip to the shop your car showed codes 402, 732, 733, 171 and 174. After changing the DPFE/EGR, did ALL those codes go away and now only codes 340, 171 and 174 exist? Or do you have the second set of codes in addition to the first codes?

Thanks

Aug 09, 2010 | Ford Windstar Cars & Trucks

2 Answers

VW transporter,1.9 TD 1998 ABL wont start


Your problem is located behind the ignition switch.Remove the covers of a steering column behind the steering wheel.There is 5 or 6 wires around on black or white plastic switch.Change it.ATT ! Before removing the steering wheel disconect the battery and wait for at list 10 min. to deactivate the SRS airbags.

Jun 25, 2010 | 1997 Volkswagen Eurovan

1 Answer

Got audi a4 1996 diesel need to change cambelt but


A diesel uses a different procedure. You'll need a tool to hold the camshaft pulley parallel to the top of the cylinder head. The timing mark to set TDC for piston #1 is located on top of bell housing. The pointer must be aligned on the diamond cut on the flywheel. A VW/Audi setting bar tool #2065A is needed to lock the camshaft in position. Lock the injection pumpin position using the special lock pin (VW/Audi special tool no. 2064). Caution: If the drive belt is broken or has jumped time, do not attempt to lock the sprocket at this time!!! You will also need VW/Audi special tool no. VW210 to measure belt tension between camshaft sproket and injection pump sprocket. So good luck.

May 01, 2010 | 1996 Audi A4

1 Answer

Hi i have a 2004 vw t5 transporter 174 kombi when accelorating hard it hesitates especially when towing it seems worse when engine is warm


Check the engine codes at Autozone or a place like that. Then check fuel pressure, change fuel filter, and listen for hissing when you remove the gas cap, from a possible bad purge valve.
Final advice is to try a slightly smaller spark plug gap, because it will not blow out the spark as easily when under load.

Apr 12, 2010 | 2004 Volkswagen Eurovan

3 Answers

What does code p1391 mean when failing an emissions test


intermittent loss of crankshaft or camshaft position sensor.

Oct 14, 2009 | 1997 Dodge Ram 1500 Club Cab

3 Answers

Vw transporter t4


Hi, Had the same problem, just found the fault,it was a brcken wire causing relay109 to drop out. It was in the upper of the two harnesses on the bulkhead above the air filter, if you pull back the outer sleave and check the thin black/white wire for a break I think you will find your problem. You should have 12v between it and positive. Good luck.

Apr 11, 2009 | 2001 Volkswagen Eurovan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...