Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hey, torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10
Posted on Jan 14, 2009
BMW cylinder torque setting all models
According to my service manual as follows.
Cyl head to engine block (torx e12 M10 bolts)
Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees
Cyl head to lower timing chain cover 10nm (89in – lb)
The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.
Posted on Aug 29, 2009
for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.
Posted on Dec 05, 2009
Tips for a great answer:
Sep 22, 2017 | Ford Cars & Trucks
Aug 17, 2015 | Kia Cars & Trucks
Oct 15, 2012 | Toyota Cars & Trucks
Mar 27, 2011 | 1992 Dodge Dakota
Jan 22, 2011 | Audi A3 Cars & Trucks
Dec 17, 2010 | Volkswagen Polo Cars & Trucks
Mar 06, 2010 | 2001 Jeep Cherokee
Nov 24, 2009 | 2001 Kia Sportage
Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme
88 people viewed this question
Usually answered in minutes!