Question about 2007 Honda Civic 1.8

Open Question

2007 honda civic vibrating at idle and low speeds when engine is cold

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 208 Answers

SOURCE: honda civic ek3 1999 model

I assume you mean low idle speed 500 rpm. Genarally a tapping noise comes from the valve train, and a knocking noise comes from the crankshaft connecting rods. The way that a mechanic will narrow it down is to use a mechanics stethoscope. You can get one pretty cheaply at an auto parts store. Put the metal end of the scope on a part of the engine and listen for noise. On the other hand, if your car is idling at 5000 rpm, it would also be making ALOT of noise.

Posted on Aug 01, 2008

  • 3 Answers

SOURCE: 2004 Honda Civic -Code P0122 Throttle Position Sensor Voltage Low

yes, this is the case of a failed throttle body, in which case it needs replaced, the car is getting too much fuel causing the high idle. this needs replaced asap. you could proably find a small independant honda shop that could do the work for less.

Posted on May 12, 2009

  • 62 Answers

SOURCE: 1998 Honda Civic 1.6 5 speed - Error codes: po300,

when the distributer cap was removed did you check for oil in the distributer housing?

Posted on Jun 30, 2009

  • 33 Answers

SOURCE: honda civic 2000- idle speed is high even in park

Try cleaning your sensors, located on the throttle body with spray cleaner, especially made to clean sensors.

Posted on Aug 07, 2009

  • 11 Answers

SOURCE: 1997 honda civic has a rough idle

Possibly a Throttle position sensor. If it surges in park and it won't idle correctly this could be a solution.

Posted on Dec 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 civic 4 door and the engine surges at idle


hot engine or cold, or both???????????????????
surging or hunting idle is complex but for sure the ECU has lost control of idle speed , there are 2 macro reasons, (vast causes)
1: ISC is stuck (in non SAE terms, the idle speed control valve ) is stuck.
2: engine is missing cause the ISC to GO NUTS trying to control
idle and can not.. the 50 reasons, , have list ask.
we do tests to find out if either or both the above are bad.
do you want tests, or guessing>???

Jan 22, 2014 | 1999 Honda Civic

1 Answer

How to adjust idle?


hot engine ?, cold or both,, EFI runs in 3 modes, cold ,warm and hot.

name it.

which engine option (displacement)??????



there is no idle adjust, that is the PCMs, job 100%, all the time.

Carbs are gone.

here is rule one for all EFI.

idle is the last thing to work correctly.

anything the causes a gross imbalance of engine power to engine load, under idle will cause , idle controls to fail.



low idling causes. (over 50 but, here ar basics)

1: AFR (air fuel mixture too lean) usually surges. (clogged or leaking injectors. or fuel pressure way to high)

2: air leaks, cause racing, so not that. (speed density car ,if is)

3: egr stuck open. low idle and misfire.

4: ISC stuck closed (IAC electric)

5: cam belt slipped, timing retarded, compression at 1/2 spec, and well, valve will bend soon....

6: CEL glowing running? can be in limphome, limp cancels Idle controls (in may cases) RTM read the FSM on DTCs.



if fails hot?, is hot = 180F temp or more? "thermometer time"

if not, the PCM goes , quite nuts.

Dec 23, 2013 | 2010 Honda Civic LX

1 Answer

I have a 1991 honda civic hatch with 1.5 engine idles fast cold and hot and ECU flashes twenty times


Hi Jason, I suggest you take the vehicle and have a diagnostic scan carried out. Doing that will pin point the problem area and take out the guess work. I have known occasions when someone has tried to adjust the throttle butterfly, hoping to reduce the idling speed and by doing that have taken the TPS (Throttle Position Sensor) out of the correct adjustment, causing abnormal idle speed. Regards John

Mar 29, 2012 | 1991 Honda Civic

2 Answers

Honda civic 1.6A vibrating problem. Manufacture year 2008. Have driven for just 2 years & 1 mth, clocked only 27,300 km to-date


does it vibrate at highway speeds or sitting still at idle? the highway speed vibration could be tires out of balance. the idle speed vibration could be weak engine mount or idle speed too low.

Aug 03, 2011 | Honda Civic Cars & Trucks

1 Answer

Low Idle


Air Idle Control. No screw

May 31, 2010 | 1994 Honda Civic

1 Answer

Engine idling varies depending on light or aircon is on/off


dude its normal for first start or cold start that the idle is ok but it must high than normal... its normal because the engine is warming up it self... when it gets warm, the idle speed will return normal idle... your engine is 1200cc, it has not much HP for a great load... and i know its a carburatored engine and its an old engine, your head lyt and a/c fan and aux fan and all the electrical system on your car, uses the HP of you engine and its a lot of load to the alternator driven by the engine to generate an electricity they need and thats why the engine rpm speed lowering down to dead and its shake. thats why when you use your lyts or all electrical, you engine is weakening... the best remede is adjusting you idle speed... its located behind the carburator.. its a small black knob.. just make a twist each eighter way and you'll find out if your idle rpm speed ts incresing or decresing.. just increase it and try opening your lyts and other electrical, if its still shaking then adjust it a little more

Aug 26, 2008 | 1994 Honda Civic

1 Answer

Honda civic ek3 1999 model


I assume you mean low idle speed 500 rpm. Genarally a tapping noise comes from the valve train, and a knocking noise comes from the crankshaft connecting rods. The way that a mechanic will narrow it down is to use a mechanics stethoscope. You can get one pretty cheaply at an auto parts store. Put the metal end of the scope on a part of the engine and listen for noise. On the other hand, if your car is idling at 5000 rpm, it would also be making ALOT of noise.

Jul 24, 2008 | 1998 Honda Civic

Not finding what you are looking for?
2007 Honda Civic 1.8 Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...