Question about 1995 Mercury Villager

1 Answer

Hard to start, engine dies on higher rpm - 1995 Mercury Villager

Posted by on

  • yadayada
    yadayada Feb 24, 2012

    When does this predominantly happen

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 2,431 Answers

Hard to start and stall at higher RPM. So you are stalling at load. What the engine needs at higher RPM and load is more fuel.The fuel pressure at idle should be at 30 psi to 45 psi. A plugged fuel filter will also do this. so you need to address the fuel pump and filter

Posted on Feb 24, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine dies when when apply gas to it


Check for vacume leak including intake. Spray some carb cleaner around intake and vacume hoses and listen for engine rpm to change.

Aug 24, 2017 | Honda Cars & Trucks

1 Answer

1998 Ford Explorer Ltd - V-8 5.0L - will not start - hard starting yesterday when it would start but not increase RPM then died. Now will not start at all. Spark is good


Start by checking for fuel pressure and fuel delivery to the injectors, you can quickly check this by spraying starting fluid into the air intake of the engine, if it starts and dies the engine is not getting fuel.

Jan 10, 2017 | Ford Cars & Trucks

1 Answer

Driving on the road the RPM goes higher wituout speedind


Check out related help links to troubleshoot these problem:----Click the link below:---Idles Fine but RPM jumps in drive mode?http://technoanswers.blogspot.in/2012/07/idles-fine-but-rpm-jumps-in-drive-mode.html
---------Mitsubishi Lancer rpm needle bounces?http://technoanswers.blogspot.in/2012/02/mitsubishi-lancer-rpm-needle-bounces.html
--------How to adjust rpm on 2009 dodge charger SRT8?


http://schematicsdiagram.blogspot.com/2011/12/how-to-adjust-rpm-on-2009-dodge-charger.html
---------
Engine cuts out at 3000 RPM?http://schematicsdiagram.blogspot.com/2011/12/engine-cuts-out-at-3000-rpm.html

---------

Cold start problem and vehicle shudder around 2500 to 3500 rpms
http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

---------
High rpm in neutral? Inconsistant high RPM in neutral?http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-----------
Jetski Sputters and Low RPM? http://whatisbyme.blogspot.in/2012/07/jetski-sputters-and-low-rpm.html

--------
Fuel Injection Problem And RPM suddenly increaseshttp://whatisbyme.blogspot.in/2012/07/fuel-injection-problem-and-rpm-suddenly.html

----------
2005 Toyota Highlander: Engine runs hard RPM below 3000?http://whatisbyme.blogspot.in/2012/05/2005-toyota-highlander-engine-runs-hard.html

---------
1987 Toyota Camry: RPM Drops going Up hills?http://whatisbyme.blogspot.in/2012/05/1987-toyota-camry-rpm-drops-going-up.html

-----------
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
1990 Toyota 4Runner: Engine cuts off when reaches 2000 RPM?


http://whatisbyme.blogspot.in/2012/05/1990-toyota-4runner-engine-cuts-off.html

------------
1999 Toyota Camry: Erratic stalling and high engine RPM at idle?


http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-erratic-stalling-and.html

---------
1995 Toyota LS: Misfire at idle or low RPMhttp://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

-----------
Lexus RX: Tapping noise under Valve Cover At Low RPM?http://technoanswers.blogspot.in/2012/04/lexus-rx-tapping-noise-under-valve.html

----------
These will help.
Thanks.

Nov 22, 2012 | 2008 Toyota Avalon

1 Answer

Engine runs bad, sometimes dies when put into drive or reverse


CHECK FOR OIL LEAK ONTO SPARK PLUGS REPAIR AS NECCESSARY

Aug 19, 2012 | 1993 Saturn SL2

1 Answer

I have a 82 mercury Capri 5.0. I recently installed a new 12v ignition coil and a new ignition module. When engine is at high rpm or high load (5th gear gaining rpm at 2000rpm) the engine dies. The...


yes
voltage to the coil should be 12 volts on start and 7.5 volts on run
with power the inverse applies --higher voltages the lower the current or the lower the volts the higher the current
recheck the installation or get an accredited auto electrician do it for you

Jul 26, 2017 | 1983 Mercury Capri

1 Answer

93 chevy suburban v-8 tbi hard to start, but starts, will run but will not idle, can keep it running or driving as long as you rev engine constantly. Holding engine at half throttle it will slow and die. ...


Assuming your engine is in good mechanical condition, there are only a few options.

1. You may have a vacuum leak.
2. The pickup in the distributor may be worn to the point that it is sloppy at idle but normal at higher rpm.
3. Idle control valve/motor may not be working properly.

It probably isn't an ignition related problem as the problem would normally get worse as RPM increases. I've seen #2 about 5 times in the past year or 2 so it's not uncommon and would recommend replacing the entire distributor if you come to that conclusion, but would definitely check all vacuum hoses first.

Jun 24, 2011 | 1993 Chevrolet Suburban

1 Answer

After starting the engine races at higher rate


ur cold start needs adjustment then when the engine is warm it should idle at 600 to 650 rpm

Jul 27, 2010 | 2006 Hyundai Tucson

2 Answers

1996 VW Jetta with 2.0 engine. Dies when slowing from high RPM


Check your vacuum lines, make sure there is no leaks, and go from there, then all you electrical connection in the engine compartment.
I have a 1996 Jetta Trek Edition, the hoses, and wire harness, are so brittle, any movement can cause hoses and wire insulation to crack.

Apr 27, 2009 | 1996 Volkswagen Jetta

1 Answer

1994 Buick LeSabre engine dies when cold at 2000 rpm


have your temp sensor checked and does any of your warning lights come on?

Mar 23, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
1995 Mercury Villager Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...