Question about 2002 Dodge Durango
Dependa on the alarm system you have if it is sentry key imobilizer the dealer has to remove and reprogram the alarm module if you have a aftermarket alarm go under the dash and remove the relay and restore wires that have been bypass to the starter and restore it in its original condition. If its a plain starter disable system you will need to acces the starter relay open the cover (located in the engine fuse junction box) expose the relay have someone in the vehicle turn key on vehicle in park or nuetral foot on the brake collapse starter relay and you will start. this is the common alarm for this year and make if this is what you have always make sure the E brake is on and your not in front should it happens to start in gear and run you over
Posted on Feb 24, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: how do i disarm a
take the door key and lock and then unlock the passenger door (standard fro all Chrysler products), if the system doesn't disarm then u have a failure in the system.
Posted on Oct 20, 2010
SOURCE: 2000 Dodge Durango
All you need to do is Remove the POSATIVE cable from the battery for about 25 seconds then reconnect it. This will reset the computer and everything else!
Posted on Jan 30, 2009
SOURCE: 1198 Dodge Ram Pickup
it sounds like you may have an aftermarket alarm system. it can be removed completely from the vehicle. if it is a factory system the key fob or unlocking the door wit the key should disarm the system. if they dont you may want to have a dealer or reputable shop check the system
Posted on Nov 12, 2008
SOURCE: 1999 dodge durango wont start
may work may not...on older cars when the starter went bad and the car wouldn't start you could tap the starter with a long screwdriver or hammer lightly and the solenoid would engage and start the car but you need to get it home or to shop cause it wouldn't work again..if you try this and the starter engages then the starter needs to be replaced if you haven't already tried..if the lights are flashing when you try to start the vehicle then o would say its prob a malfunctioning alarm system..try to diengage it by pulling fuse for alarm..don't know if you can though..check the starter...good luck
Posted on May 11, 2010
Tips for a great answer:
May 02, 2016 | 2003 Dodge Durango
Mar 19, 2015 | 1999 Dodge Durango
Feb 10, 2015 | 2005 Dodge Durango SLT
Apr 03, 2014 | Dodge Durango Cars & Trucks
Mar 13, 2012 | 2000 Dodge Durango
Dec 22, 2010 | 2004 Dodge Durango
Jun 28, 2009 | 1999 Dodge Durango
Apr 28, 2009 | 1999 Dodge Durango
4,584 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: