Question about Cars & Trucks

Open Question

Audi a2 wiper arm replacement

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 432 Answers

SOURCE: 1989 Corvette - Windshield Wiper Arm

On mine I lifted up the arm,at the base where its connected to the car there is a little metal tap that sticks out. Pick up on the tab,at the same time release the arm. It should stay up. Then kind of wiggle the base near the tab while pulling up on the arm.It should come right off.Its on a spline like stub.Try to put it back on the same spline teeth it came off of.This keeps the arm in the proper place. Once off its easier to see how the blades come off. Try calling a large auto parts store to see if they have your proper blades. Most large auto parts stores will install the blades for you for free if you buy blades from them.Dont buy the cheapest ones, they dont last.
I hope this helps you.

Posted on Sep 09, 2009

toneman2121
  • 775 Answers

SOURCE: The wiper arm is not conacting the rear window -1994 Audi CS 100

the arm is probalby just stuck. apply penetrating oil, give it a few taps, tapping will help distribute the oil, leave it sit for awhile and pry it off. repeat a few times if necessary. make sure you are pulling the arm straight off and not at an angle

Posted on Mar 14, 2010

  • 14036 Answers

SOURCE: How do I replace a rear wiper arm on a Audi Q7

LOOSEN AND REMOVE WIPER ARM NUT.THEN REMOVE WIPER ARM BY ROCKING MOTION SHOULD COME OFF.

Posted on Oct 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windscreen wipers not working


Wiper arm is loose at pivot. Take caps off at pivot and run motor to rest position. Move wiper arms to rest position and secure nuts.

Mar 01, 2015 | 2008 Audi A3 S Line Hatchback

1 Answer

Audi A4 window wiper stuck in op position,but motor still turning


Check to see if the splines where the wiper arm is connect is not slipping. Some are bolted on some have a clip that holds the arm on a splined knob

Jan 08, 2015 | Audi Cars & Trucks

1 Answer

Need to chage wiper arm on audi quattro how do i get the old one off?


Carefully extract the wiper arm out from the axle. In some cases you need to use an extracting tool. Heed of the windscreen !!!
How to change a wiper motor & repair wiper mechanism on Audi A4

First time you must diagnose why windscreen wipers going slow and/or stopping.
In order to find out the cause of wipers stopping you can try follows:

1. Carefully extract the wiper arms from their axles (two pieces). In some cases you need to use an extracting tool. Heed of the windscreen !!!
2. Disassemble the plastic covers from the bottom of the windscreen.
3. With the bonnet up you can start the engine, (transmission in "N" or "P" position and parking brake on). Now you must switch on the control lever of the wipers, and go to the engine compartment. If the wiper motor runs let the wiper motor running for a few minutes and switch off. Go to the step 4. If the wiper motor do not runs you must check first the electrical feeding of the motor. It is necessary to unscrew three bolts of the mechanism and disconnect the electrical coupling (difficult assurance). If the electrical feeding is OK you must replace the motor - steps 5, 6, 7. If not you must check electrical connections, the control switch of wipers and electric cables.
4. Now you must check the two bearings of wiper mechanism with your hand. In the most cases the left bearing is out of order (is very hot). This is the most encounter fault of the wipers running at Audi.
5. For have enough space to manipulation the wiper motor together with their mechanism you must extract the plastic cover of the engine computer box, and extract also the box screws. Then you can move slowly the engine computer box, just for a few milimeters.
6. You must disconnect the electrical coupling of the motor (difficult assurance), unscrew three bolts of the mechanism and extract together with the motor. You must move them slowly between windscreen and engine computer box until the wiper motor go out together with the mechanism. This is the most difficult operation!
7. Now you can repair the bearings, replace entire wiper mechanism or replace the wiper motor. It is not very simply, but it works.
Heed of the windscreen !!!
Refit all in reverse order.

Jan 22, 2011 | Audi A4 Cars & Trucks

2 Answers

How do I replace a rear wiper arm on a Audi Q7


LOOSEN AND REMOVE WIPER ARM NUT.THEN REMOVE WIPER ARM BY ROCKING MOTION SHOULD COME OFF.

Oct 02, 2010 | 2007 Audi Q7 4.2 FSI

1 Answer

The wiper arm is not conacting the rear window -1994 Audi CS 100


the arm is probalby just stuck. apply penetrating oil, give it a few taps, tapping will help distribute the oil, leave it sit for awhile and pry it off. repeat a few times if necessary. make sure you are pulling the arm straight off and not at an angle

Mar 13, 2010 | 1994 Audi 100

1 Answer

Wiper arms stuck in up position


the circuit board in the wiper motor is at fault. It should be replaced just by removing the wiper motors black plastic cover. The circuitry is inside of that cover

Feb 04, 2010 | 2004 Audi A4

1 Answer

I have audi 14 wiper blades are not working


It is possible that the linkage is jammed. Try turning the wipers on and gently pull the wiper arm by hand to see if it will move. It it starts to move you've found the problem.

If it doesn't move at all and the fuses are ok it is likely the wiper motor that has failed.

Jan 11, 2010 | 1998 Audi A4

1 Answer

Wiper not working on my audi A3


you left something disconnected the wiper motor is connected to a transmission and transmission is connected to wiper pivots and pivots move wiper arms seems like you missed something

Jan 03, 2010 | 2007 Audi A3

1 Answer

How to Replace Windshield Wipers


You need to replace only the wiper blades which are attached to the wiper arm with a clip, simply press the clip and slide the old wiper blade out of the arm, looks like a "u" bend so you need to pull it down opposite the bend, then put in the new wiper blade in reverse way only you don't need to press the clip. Once you hear the click and the blade does not move in the arm, job is done.

Dec 18, 2009 | 2002 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...