Question about 2003 Toyota Corolla

Open Question

Corolla door lock actuator - 2003 Toyota Corolla

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: 05 corolla oem power door locks and windows install

All of the power locks and power windows are directly ties into the "Integration Relay". This is the large white box behind the fuse panel under the dash. There are 2 different Integration relays, one with electric windows, and one without them. You may need to change the integration relay, also.

Posted on Feb 24, 2009

c17hydro
  • 2984 Answers

SOURCE: The automatic door lock for the passenger side of

More than likely an actuator...just replced the one in my pathfinder. Easy to remove and replace.....check your fuses first though. If you have a bad actuator and need help on the procedures, just reply to this post and I will get a notification through my email. Swap the actuator with one from the drivers door. You should know if you actuator is bad. Another thing it might be also is that there is a little plastic "pin" that pops the lock up. If it is broken off, you need to replace the little piece. Take a look at it and you will see what I mean.

Greg

Posted on Aug 25, 2009

  • 69 Answers

SOURCE: 1998 toyota corolla rear door lock actuator

You can replace with any of "universal" actuator.
Its just a small motor inside power door lock, that works up and down according to the electricity that come into it. Good luck !

Posted on Sep 06, 2009

Bray2thaden
  • 173 Answers

SOURCE: How to replace 1998 toyota corolla left door lock

take off the door panel, there will be a aluminum frame behind it, but isnt too hard to work around, its located at the bottom directly under the lock, theres a couple bolts and a wiring harness, and you also need to have the window up to get it out, hope this helps! good luck

Posted on Mar 12, 2010

Bray2thaden
  • 173 Answers

SOURCE: 2006 Toyota Corolla. The driver's door won't work with remote.

the actuator might have been disconnected from the lock, its attached inside the door, with a metal rod that clips into the actuator, check it out, might be a easy fix, good luck and god bless, please rate me!

Posted on Mar 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 Toyota Corolla power locks acting up


Sounds like your door lock actuators have worn out. If you take of the inside of your door (panel) there are little electric motors that unlock/lock your doors. When they fail you can not use your locks anymore. You could get some from a salvage yard and install yourself. If any place carries them besides your dealer it'd be cheaper to go there so you may want to look into that if you don't think you want/can do the job yourself.

Nov 18, 2012 | 2010 Toyota Corolla

2 Answers

I own a 1993 toyota corolla twincam GLI 1.6 sedan. The central locking is not working on the drivers side , whereas the other three doors are functioning well. I would appreciate some info , even if it is...


Hello and welcome to FixYa!

The door lock actuator is surely faulty that's why it doesn't respond. The actuator is a black tube that has white tip where the metal wire is attached. You can find this on the frame of the vehicle when you remove the door trim. Have it replaced and you'll be good.

Hope this helps and thank you for using FixYa!

May 03, 2011 | 1993 Toyota Corolla

1 Answer

How to replace 1998 toyota corolla left door lock actuator?


take off the door panel, there will be a aluminum frame behind it, but isnt too hard to work around, its located at the bottom directly under the lock, theres a couple bolts and a wiring harness, and you also need to have the window up to get it out, hope this helps! good luck

Mar 10, 2010 | 1998 Toyota Corolla

1 Answer

Automatic passenger door lock


You should replace power door lock at front passenger side, you can use any 'universal' power door lock. its an unit with a small motor inside that have a mechanism to up and down according electricity from the actuator (master door lock at driver side)
Hope this help :-)

Sep 13, 2009 | 2005 Toyota Corolla

1 Answer

1998 toyota corolla rear door lock actuator not working. How do I remove old one? Can it be replaced by so-called ''universal' lock actuator? Thanks


You can replace with any of "universal" actuator.
Its just a small motor inside power door lock, that works up and down according to the electricity that come into it. Good luck !

Sep 03, 2009 | 1998 Toyota Corolla

1 Answer

The automatic door lock for the passenger side of my 2005 Corolla no longer works. I can't find out how to fix it. Is it simply an actuator, or is it something else?


More than likely an actuator...just replced the one in my pathfinder. Easy to remove and replace.....check your fuses first though. If you have a bad actuator and need help on the procedures, just reply to this post and I will get a notification through my email. Swap the actuator with one from the drivers door. You should know if you actuator is bad. Another thing it might be also is that there is a little plastic "pin" that pops the lock up. If it is broken off, you need to replace the little piece. Take a look at it and you will see what I mean.

Greg

Aug 25, 2009 | 2005 Toyota Corolla

1 Answer

I own a 2005 corolla le, my problem is the auto lock in the two front doors do not open when the remote is switched on but the two rear door locks has no problem, it works as usual. so i have to manually...


You probably have two bad lock actuators that are in the front of the car....change one and if it works then do the other. If they used to work and no electrical fiddling has occured this is the problem. You could go in the the door and electrically diagnose it....you up for that?

Jul 02, 2009 | 2003 Toyota Corolla

1 Answer

2006 Toyota Corolla. The driver's door won't work with remote.


the actuator might have been disconnected from the lock, its attached inside the door, with a metal rod that clips into the actuator, check it out, might be a easy fix, good luck and god bless, please rate me!

Jun 06, 2009 | 1998 Toyota Corolla

1 Answer

Door locks don't work


its the door lock actuator that needs replacing / Please rate my response thank you very much

Feb 01, 2009 | 1999 Toyota Corolla

Not finding what you are looking for?
2003 Toyota Corolla Logo

Related Topics:

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...