Question about 2004 Chevrolet TrailBlazer

1 Answer

The power windows don't work> Is there a fuse for the power windows?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,370 Answers

For Doors not getting open with remote or key problem,there are help links provided below.Click the link below to go through its procedure and troubleshoot the problem:----
drivers side front door will not open from inside or outside?

http://technoanswers.blogspot.com/2012/01/ford-f-350-crew-cab-drivers-side-front.html

----------

Car door will not close?
http://howtobyme.blogspot.com/2011/11/car-door-will-not-close.html

--------

All power door locks not working ?
http://howtobyme.blogspot.com/2011/11/all-power-door-locks-not-working-on_14.html

----------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html
---------------
How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

----------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

---------
Truck Door will not close?

http://schematicsdiagram.blogspot.com/2011/12/ford-truck-door-will-not-close.html

-----------
Where is Cars Door control Module located?

http://schematicsdiagram.blogspot.com/2011/12/where-is-cars-door-control-module.html

--------
Power door locks not working?

http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html

-----------
Door ajar light stays on?

http://technoanswers.blogspot.com/2012/01/door-ajar-light-stays-on.html

----------
Door locks not working?

http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html

----------
Front Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/front-door-dis-assembly-diagram-for.html

---------
Rear Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/rear-door-dis-assembly-diagram-for.html

--------
How to test Power door locks?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html

--------
Doors will not open with Remote?

http://schematicsdiagram.blogspot.in/2012/02/lexus-doors-will-not-open-with-remote.html

--------

How to replace Door Hatch ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-hatch-on-acura-integra.html

---------

How to remove Doors?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-doors-on-acura-integra.html

-------`-

How to Replace Doors?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-doors-on-audi-a4-and-vw.html

--------

Remote will not unlock Rear door?
http://schematicsdiagram.blogspot.com/2011/12/remote-will-not-unlock-rear-door-on-gmc.html

--------

Door locks or windows not working on car?
http://schematicsdiagram.blogspot.com/2011/07/door-locks-or-windows-not-working-on.html

--------

This will help.

Thanks.

Posted on Feb 29, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 96 Toyota Camrys windows don't go down or the


You need to see a wiring diagram to see how the ignition switch allows or sends power to that 30 amp fuse. The switch may turn on a relay (maybe the ignition relay) that sends power to the fuse panel. Or the run wire out of the switch may itself turn power on at the fuses. You may have a loose connection behind the fuse panel.
Get a test light, pull the fuse, and check for power at the fuse terminals, with key on. One terminal for the fuse should have power. If not, power is lost between the ignition switch and that fuse. If it does have power, and windows still don't work, check the wire from fuse panel to the master switch-loose or poor connections, maybe a partially broken wire. If it looks good, check the ground wire for the windows. The ground wire originates at the master switch and will go back into the cabin to a nearby ground, possibly behind the left kick panel. If still no help, someone may need a volt- ohmmeter to start checking continuity of wires, voltage drops, etc.

Jun 18, 2013 | Cars & Trucks

2 Answers

Chevy Avalache 2007 blew a fuse while getting a jump, car won't start, rear windows and power locks don't work


You blew more than 1 .

The HUGE MAXI FUSE is probably burned... IF I remember correctly, it is a 80 or 100 Amp

Apr 06, 2013 | 2007 Chevrolet Avalanche LTZ

2 Answers

Where is the power windows fuse located at on a 1994 saturnsl2


In the underhood junction block. It's the 30A WINDOWS fuse.

Oct 02, 2012 | 1994 Saturn Sl

1 Answer

Fuse for relay window dodge durango 04


There is no "fuse" for your power windows. ALL of your window circuits are protected by a 25 Amp self-resetting circuit breaker in the Junction Block. Junction Block (JB) is concealed behind the left outboard end of the instrument panel cover.
I don't know which window you are calling a "relay window" but if your other windows are working, this circuit breaker is NOT the problem.

Please also review these articles:
Where's The Fuse?

What Else Could Be Wrong?

Sep 08, 2011 | 2004 Dodge Durango

2 Answers

Brake lights dont work Bulbs are good and brake light switch is good


The power flow for the brake lights goes like this: Fuse ->Brake switch -> Turn signal switch -> Rear lights. The only difference is, if you have a 3rd brake light in your rear window, that gets its power directly from the brake switch. It does not go thru the signal switch first. So, if you are having a brake light problem, and your fuses are good, check the 3rd light in the rear window, if it lights up (assuming the bulbs are good, no one ever changes them), then the problem is most likely in the turn signal switch, hope this helps!

Aug 28, 2011 | 1992 Subaru Legacy

2 Answers

I own a 2003 f-150 heritage edition The windows worked just fine this morning I go to role them up tonight they will not work. I checked every fuse none bad. They light up and locks and power mirror...


Check the power to the power window switch on the driver's side.

Std & SuperCab Engine compartment fuse panel, Fuse # 110 -> Accessory delay relay -> Light Blue w/ Black stripe wire.

If you do not have power at the light blue w/ black stripe wire with the key in the accy or run positions, next would be to pull the accessory delay relay from the cab fuse panel, and bench test it to make sure when power & ground are connected to the coil, that the normally open terminals close. Easy test, power & ground to terminal 85 & 86, ohm meter on terminals 30 & 87.

sscullys_198.jpg

If the accessory delay relay bench tests good, check for continuity on terminal 87 to the light blue w/ black stripe wire at the window switch.
Another easy route is to install a jumper in the relay socket ( with the relay removed ) as shown in the diagram above, red line. This should have power at the power windows regardless of the key position. If not, the fuse is not good or the wire is broken, most likely in the rubber boot from the a pillar to the driver's door.

Aug 22, 2011 | 2003 Ford F150 Regular Cab

1 Answer

Power windows: passenger window does not go up or down, checked the fuses under the steering wheel column on the driver side and the passenger side. switched the fuses from the side that doesn't work...


Switching Fuses proved nothing

Don't have a volt meter ?

Did you check out any of the window switches ?

If not the switch, then door panel comes off & you
test the motor

Aug 09, 2011 | 2005 Chevrolet Silverado

1 Answer

Interior lights, moon roof and windows don't work. Changed fuses many times and they kept blowing out.


Why would you change a fuse more than once?

Don't you know what a fuse is for?

If it blows out even once,you have a higher
current load than the fuse is rated at, or a
short to ground

Have the items that don't work correctly ,
diagnosed & repaired.

Jul 13, 2011 | 2008 Ford Fusion

1 Answer

No dash lights, power locks don't work, fuel gadge doesn't work, radio doesn't work.


all these circuits share some common fuses, check fuse #6 ( 10 amp ), fuse # 11 ( 15 amp ) & fuse #12 ( 10 amp ) all in the inside fuse box at the left end of the dash.....good luck

Jun 20, 2011 | 2000 Mitsubishi Diamante

1 Answer

The power windows quit working


If all the windows have stopped working, first thing to check would be the fuse. The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the window fuse it should be around 30 amps. The use of a small pair of pliers will assist you in removing the fuses for inspection.

Apr 21, 2011 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...