Question about 2007 Hyundai Santa Fe Limited

1 Answer

Pressure sensor on common rail

How do i get to the pressure sensor on the common rail of hyundai santa fe 2007 cdx.

Posted by on

  • yadayada
    yadayada May 11, 2010

    Do you mean the fuel rail?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Hi there! i was a master tech 4 hyundai. sorry 2 say u cant by the sensor seperate. you have to get the rail. it should be covered by warranty? take it to your local dealer? best advise i can give you 4 that! they can carryout the required tests with hi scan! wot is the the problem you are exsperiencing??
any problems please feel free to contacy myself.

many thanks

Dominic Hill

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the intercooler from my 2007 Santa Fe 2.2CRDT?


maybe the radiator? the thing that sits in front of the engine with the fan aimed at it? in that case, youll probably have to take off the fan housing, drain it via the drain plug at the bottom left or bottom right of it (dont do that if you have had the engine running recently itll burn) let it drain. take off all of the hoses connected to it, then it will be secured somehow around the edges, undo those points and it should come out. id suggest taking another approach at getting the 4th screw out however. smaller/different angled tools often do the trick

Oct 20, 2012 | 2007 Hyundai Santa Fe Limited

1 Answer

How do I change the fuel filter on a 2006/7 Hyundai Santa Fe 2.2 CRDT CDX safely?


There is no external type fuel filter on the Santa Fe. It is built into the fuel pump module in the tank,you rould have to remove your rear seat bottom cushions and get to the access plate and remove the pump module. Can be very time consuming if you have never done this before.

Oct 20, 2011 | 2007 Hyundai Santa Fe Limited

1 Answer

2007 hyundai santa fe fuel 2.7 6 cyl fuel filter location?


how to change the fuel filter on 2007 hyundai santa fe

Sep 20, 2010 | 2007 Hyundai Santa Fe Limited

1 Answer

Looking to fit power chip. Where is diesel rail


on top of the injectors,alloy tube about 15" long

Jul 15, 2010 | 2007 Hyundai Santa Fe Limited

1 Answer

Where fuel pressure regulator located on a 2004 Hyundai Santa Fe. I have checked the fuel pump, and blown out the lines, but there still is no pressure at the fuel rail.


Are you sure the fuelpump is good,even a bad regulator you should still have fuel preasure,the regulator if its not part of the pump should be on the fuel rail,

Jun 21, 2010 | 2004 Hyundai Santa Fe

1 Answer

Went to dealer to purchase side rails for my Santa Fe. Due to elevation of floor, I had problem entering and exiting vehicle. Dealer installed side rails that he said were made fro the Santa Fe. The...


the santa fe offers side steps, it is a solid system that mounts to the body and frame rail of the truck and extends out from the vehicle a little bit... other then that i know a lot of places sell aftermarket parts, but a lot of them if you put them on you have a lot of problems cause they are not made as a certain year kit, they are made as a generic kit and have to be made to fit.... straight from the factory side steps are the better way of going.... not anything other then that or you will have a sore ankel.... hope this helps you...

Jun 12, 2009 | 2007 Hyundai Santa Fe Limited

Not finding what you are looking for?
2007 Hyundai Santa Fe Limited Logo

Related Topics:

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...