Question about 1997 Mercury Sable

Open Question

How to change spark plugs on 1997 mercury sable

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Need spark plug gap for 94 Mercury Sable 3.0L

Listed in the owner's manual and under the hood on a placard. Also the parts store where you buy the plugs can supply this info.

Posted on Mar 18, 2009

landsend
  • 1066 Answers

SOURCE: misfire in cylinder 1 2001 mercury sable

Next change swap the injector with another and see of the problem moves.  If it does it's a bad injector.  

Posted on Mar 26, 2009

  • 202 Answers

SOURCE: changing rear spark plugs

yes you have to take your front motor mount out and come along the motor forward you do not need to take the intake off

Posted on Apr 21, 2009

  • 11 Answers

SOURCE: mercury sable 2002 serpentine belt change

There are also two serpentine belt types for the 2002 sable. The S and U type engine. Take the old belt with you the the parts store. As for the diagram, I googled it under images and about a dozen correct ones came up. Remember the 2002 sable is the same as the 2002 Tarus.

Posted on May 02, 2009

warlock61
  • 659 Answers

SOURCE: location of the camshaft position sensor in a 2004 mercury sable

it is located on top of the engine right below the air inlet tube at the base of the intake it is a black sensor on top of a silver housing where the distributor would normally be

Posted on May 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size do I calibrate the spark plugs to a 97 mercury sable.


I have a 97 sable,my plug gap was .044.and runs good..

Mar 18, 2012 | 1997 Mercury Sable

1 Answer

Changing rear spark plugs on a 2004 mercury sable


VERY SIMPLE,JUST REACH YOUR HAND AROUND THE REAR OF THE ENGINE,GO FROM THE PASSENGER SIDE,PULL OUT THE THREE SPARK PLUG WIRES AND GET A SMALL EXTENSION WITH A SWIVEL 5/8 SPARK PLUG SOCKET AND TAKE THEM OUT.










TIM

Dec 18, 2010 | 2004 Mercury Sable

1 Answer

How do i do a tune up on a 1996 mercury sable


change the spark plugs, wires, and air filter and maybe the gas filter if needed in order to do a 'tune up' on a 1996 Mercury Sable.

Jul 03, 2010 | 1996 Mercury Sable

1 Answer

Changed spark plugs because of misfire. now when


seems like you are leaking antifreeze inside your engine have it checked white smoke usually means antifreeze

Jan 10, 2010 | 1997 Mercury Sable

2 Answers

I changed spark plugs and car still misfires and loses power when frist taking off and when going up hill it's a 97 mercury sable. what else could i do?


i bet your spark plug wires are bad. Arching is occuring (when the spark doesnt get to the plug) Probably because of old cracked wires

Jul 28, 2009 | 1997 Mercury Sable

1 Answer

1998 mercury sable could the o2 sensors or shift solenoid cause the care to lose power and when you press the gas nothing happens until the car is turned off and restarted.


Sounds more like a plugged fuel filter than anything. If not, it could be timing, faulty spark plugs, dirty air filter, timing, EGR, or a vacuum leak. You'll just have to keep shooting till you hit it, but i'd try the filter first.

May 06, 2009 | 1997 Mercury Sable

2 Answers

2000 Mercury Sable 24V 3.o engine. Need to know


yes about the upper intake and the only way i know how to check the coils is with a engine anilyser or if the check engine light comes on then you can have the codes pulled and that will tell you which cylender is missfiring this engine has a indevidual coil for each spark plug so thares 6 of them and thay slide right down over the sparkplugs

May 05, 2009 | 2000 Mercury Sable

1 Answer

Changing rear spark plugs


yes you have to take your front motor mount out and come along the motor forward you do not need to take the intake off

Apr 21, 2009 | 2005 Mercury Sable

Not finding what you are looking for?
1997 Mercury Sable Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...