Question about Chrysler Sebring

Open Question

04 mazda rx8 idel air control valve

Shuts off when you take foot off gas

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Need to tow 04 mazda rx 8

Top left and right corners of the front grill pull away to reveal the fixing holes. Make sure you WD40 the threads as Mazda coat the threads with paint. insert towing eyes and turn slowly unscrew and screw a bit at a time as you have a good chance of cross threading if you don't. Keep lubricating as you go. Make sure you take the plastic inserts off completely before towing as you will loose them when towing. replace when completed towing. Good luck and hope what ever the reason for towing it is not serious.

Posted on Mar 08, 2009

  • 91 Answers

SOURCE: program keyless entry for mazda rx8

its a dealership and computer job by them, you cant do it yourself

Posted on Jul 25, 2009

  • 449 Answers

SOURCE: location of Idle control valve on 04 CRV

It's not a easy job but I'm pretty sure you had one of those problems where the idle surges if this is the case take out the air intake tube that leads to the throttle body, get a can of carburetor fluid and spray around the throttle body. You will need someone to start the car and hold the gas peddle to 2500 rpm while you do this the car will shut of when you do this, restart the car and repeat the process until half of the can is used up. Now check your antifreeze level fill if needed and reset you check engine light. Now you can take the idle air back and get your money.

Posted on Nov 17, 2009

  • 2 Answers

SOURCE: can you convert a mazda rx8 to lpg

i checked up on this and the answer is no due to the way the rotary engine works

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 04 Mazda rx8 acceleration Cable goes to the floor and car won't go


My guess is that either something is sticking or the cable broke or there is a return spring on the pedal or the gas throttle that may have come off or broke

Mar 16, 2016 | Mazda Cars & Trucks

1 Answer

How to replace expansion valve on a 2005 rx8


1.) Discharge air conditioning.
2.) Remove dashboard
3.) Replace expansion valve.

ive never seen an expansion valve in an rx8 go.....
usually its the climate control head. The blend knob stops working...

May 18, 2014 | 1999 Mazda 626

1 Answer

When i slow down or i stop my car a mazda protege 2000 my car stop running


idle control valve may need cleaning or you have an air leak you need to check the air lines for a leak and if no leak check the idel control valve.

Jan 12, 2014 | Mazda Cars & Trucks

1 Answer

My 1994 Jeep grand cherokee starts n idles but then dies.


Engine stall or RPM fluctuates at idle.

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Sep 18, 2012 | 1994 Jeep Grand Cherokee

2 Answers

I am trying to find the gap for the spark plugs of an 04 mazda rx8


plugs for rx8s are pre gaped. dont try to change it youll damage the very expensive plug

Jan 01, 2010 | 2004 Mazda RX-8

1 Answer

Location of Idle control valve on 04 CRV


It's not a easy job but I'm pretty sure you had one of those problems where the idle surges if this is the case take out the air intake tube that leads to the throttle body, get a can of carburetor fluid and spray around the throttle body. You will need someone to start the car and hold the gas peddle to 2500 rpm while you do this the car will shut of when you do this, restart the car and repeat the process until half of the can is used up. Now check your antifreeze level fill if needed and reset you check engine light. Now you can take the idle air back and get your money.

Nov 15, 2009 | 2004 Honda CR-V

1 Answer

Mazda tribute 2002 stalling


1. will it stay running if you foot is sligtly on the gas.
if so common problem it the IAC valve located on top of the throttle body. it controls ait into the engine when throttle is closed.
2. do you hear loud fog horn like sound or hissing. this could indicate a vaccum leak.
3. are there any performance problems while driving.

my best guess would be the IAC (idle air control) valve

Jun 23, 2009 | 2002 Mazda Tribute

2 Answers

Car ideling roughly ...not stalling


sounds like you may have a problem with your Idle air control valve, located on the throttle body. this is what controls the idle when coming to a stop or stopped and turning corners or basically when your foot is not on the gas pedal

May 27, 2009 | 2002 Kia Sportage

2 Answers

04 RX8 won't start??


Hold the gas pedal to the floor and try starting the rx8 has anti flood technology that gives less fuel when gas pedal is to the floor I do it all the time hope this helps

Mar 07, 2009 | 2004 Mazda RX-8

1 Answer

1996 280 c


try cleaning the IAC valve ( Idel Air Control valve ) and check for vacuum leaks, also clean your throttle body and all passage ways please rate -jeff

Aug 26, 2008 | 1996 Mercedes-Benz C-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...