Question about Chevrolet Malibu

Open Question

Windshield washer pump malibu 2005 - Malibu Chevrolet Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2005 Malibu Maxx, rear windshield washer problem

look at the check valve/one-way vacuum valve (located behind the rear left paneling). chances are that the valve is broken and leaking. remove the valve from the hose and replace it.

Posted on Jun 15, 2009

  • 1 Answer

SOURCE: Windshield washer fluid pump quit. 2005 Jetta

I have a 2003 Jetta and the fuse box is between the dashboard and the drivers side door. There is a lid that covers it on the dashboard side. Inside there is a diagram/fuse card. The card has one top rectangular series of fuses numbered 8 through 23. Below is a square series numbered 24 through 44. The washer fuse is number 24 on the top left of the bottom square series. For me, I checked the fuse and it was good, therefore I am assuming that my pump is dead.

Posted on Jun 17, 2009

housejess
  • 317 Answers

SOURCE: location of windshield washer pump on 2005 equinox

under the hood...behind the engine ...below the wipers

Posted on Nov 28, 2009

  • 1 Answer

SOURCE: How many windshield washer pumps does a 2005 BMW

Most have 2, one for front and one for back they are same part numbers and can be swapped, there is sometimes a third one for headlights. They are located behind the washer fluid canister, very simple to replace no tools necessary just unplug the pump, pull the hose of (carefully) and pull it straight up then out.

Posted on May 27, 2010

  • 40 Answers

SOURCE: where is windshield washer pump

try to follow the hose from the reservoir,

Posted on Dec 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the windshield wiper pump located on dodge caravan 2005


The washer pump is located in the bottom of the washer fluid tank

May 24, 2015 | 2005 Dodge Caravan

2 Answers

How to replace the windshield washer pump


Yes pull the resivor and the pump should be on the bottom of the tank remove all hoses and power connection twist pump ccw and reinstall in reverse order pretty straight forward. ASE master certified tech.

Oct 05, 2014 | 2005 Hyundai Accent

1 Answer

I have a 2005 chevy malibu LS, 3.5 eng.when i turn on my defrosters the air cond. comes on with temp control on heat also have a message on the message center {RADIO} how do I clear this message.


It is normal for the A/C compressor to come on during defrost mode. This is done to prevent provide dry air to the windshield to prevent fogging when the defroster is turned on. The blend door is designed to allow heat to the windshield, but also some of the cool air from the evaporator to prevent fogging.

Sep 20, 2014 | 2005 Chevrolet Malibu

1 Answer

Windshield washer stopped working in 2005 chrysler 300 limited


Can you hear the (washer) motor run? Have someone hit the squirters with the key on and out your ear to the filler tube to see if you can hear the pump running. If yes, common for the impeller to spin off the shaft of the motor. I have found that the replacements at the auto stores work rather well. Something of a pain to remove the tank though!

Mar 02, 2014 | 2005 Chrysler 300

2 Answers

Hi, i own a bmw x5 3.0 2005, and what i am asking about is how to fix my headlight sprays, i think they r not working


Hi mario,

Stand by the washer reservoir under the hood while someone operates the washers. The headlights must be in the on position for the sprayer to work. Attached to the reservoir will be 2 washer pumps. On pump is for the windshield washer, the other for the headlight washer. They are interchangeable for testing. The reservoir can be removed after removing the 2 black speed nuts. (use a 10mm socket and ratchet). Also make sure the grommet with screen under each pump is not full green algae. Your pump has most likely failed.

Jun 23, 2011 | 2005 BMW X5

1 Answer

Windshield washer will not squirt fluid


Make sure it is above 2 degrees centigrade and not frozen.
Check and fill up fluid reservoir with wash solution.
If there is any evidence of mould growth in the bottle - it needs removing and the bottle and pump washing out.
Check operation of pump by supplying 12V to connectors.
Test pump connectors in car for 12V supply (clip on test lamp)
Check fuse in fusebox.

The problem should be easily found by checking these points.

Dec 25, 2010 | 2005 Chevrolet Malibu

1 Answer

I filled the windshield washer fluid up and it still does not spray my windshield. I hear the motor run but nothing comes out


Sometimes they route the line wrong and it gets pinched. Follow the line and check to see if maybe it is pinched or cut.

Dec 08, 2010 | 2005 Chevrolet Malibu

2 Answers

Windshield washer pump quit working. wipers work ok thou. I can't find an exact replacement.


you can buy a in line pump most anywhere and it just goes in the washer fluid line and the wires from your old pump will need the ends changed to make it work.they come with good instruction.

Aug 29, 2009 | 2002 Hyundai Accent

2 Answers

Windshield Washer Pump does not operate on 02 Accent


Your Accent has rear wiper/washer.. correct? That's where the 3rd wire comes in. They sold you/you bought the wrong pump. Here's the wiring diagrams:
bf35ab5.jpg
e609b85.jpg

Jun 01, 2009 | 2002 Hyundai Accent

3 Answers

2005 Malibu Maxx, rear windshield washer problem


Mine had this problem it was the motor on the fluid tank front driver right behind the bumper too the headlight out and there it was had to syphon all the fluid out its a 2 way motor so your front might work but the back wont

Mar 22, 2009 | 2006 Chevrolet Malibu Maxx

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...