Question about Cars & Trucks

Open Question

How to install brake release handle on ram 1500

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: installing brake pads on 2004 ram 1500

Also be sure to either have your rotors turned by a professional or buy new rotors. They wear grooves and warp over time and if not machined back into a smooth flat surface it will cause a shaking and uneaven braking problems and will greatly increase the wear on your new pads. New rotors are not that much but getting them turned at a parts store usually costs around $5-10 each. Also not turning the rotors may viod any warranty you have on the new pads.

Posted on Aug 27, 2008

  • 1 Answer

SOURCE: can't open quad cab door on 1998 dodge ram 1500

just finished tonight with the same problem on my 2000 ram, i cut the studs out with a drimel tool, and also the latch, with this out of the way the door opened easily,, have to replace bottom latch later . total time about 1 hour tigerhunting

Posted on Nov 07, 2008

  • 3 Answers

SOURCE: 2004 dodge ram 1500 rear brake light out how to replace?

Well once the tail gate is open and you take out the 2 screws on the light fixture . the light assembly shall pivot towards the outside of the box. some manipulating but the assembly shall come out.
The bulb needs a simple twist and pull .... Plug and play..

Posted on Apr 30, 2009

  • 1 Answer

SOURCE: 2000 Chevrolet Silverado 1500 brake release cable

Same thing happened to me on my 2000 silverado July 3, 2009.
There is a release next to the parking brake pedal. You have to reach way under the dash but it has worked for me for the last month. I have the part to fix it but haven't had the time.

Posted on Aug 27, 2009

matney68
  • 426 Answers

SOURCE: park brake light wont turn off

there is a switch at the top of the actual lever .This would be what I would look at.

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 dodge ram 1500 brake lights not working when truck is running


When truckis not running, brake booster is not functioning and therefor the pedal goes down further and the brake switch functions. When running and booster is working pedal does not go down so far and light switch is not released enough to work. Adjust light switch at brake pedal.

Jan 27, 2015 | 2004 Dodge Ram 1500

1 Answer

2005 dodge ram 1500 flashing red brake light


Do you have a ABS Light at the same time?

Apr 10, 2013 | 2005 Dodge Ram 1500

1 Answer

My 06 dodge ram tailgate will not release. how do i fix it?


Then you must disassemble the tailgate and check the linkages to see what is malfunctioning with the exterrior handle. Sometimes the ears on the handle itself breaks.

Nov 28, 2011 | 2006 Dodge Ram 1500

1 Answer

How to replace brake light on 1998 ram truck 1500


1.remove screws holding the light cover in place.
2. Remove plug from bulb
3. push and turn on bulb to release bulb from socket
4. insert new bulb
5. Plug in wire connecter
6. insert screws holding light cover in place

Mar 15, 2011 | 1998 Dodge Ram 1500 4WD

1 Answer

How to replace front calipers on 04 dodge ram 1500


Support the vehicle on Jack Stand. Remove the Tire. Loosen the two retaining bolts on the back of the Caliper, 1 on each end, Disconnect the brake line. Install the new caliper and from there you have two options. 1. Let the Caliper hang free and open the bleed valve on the Caliper with the engine running, when you see fluid start to drip from the Bleed valve close the valve then complete the installation. (Make sure you remove the rubber cap from the bleed valve) 2. (This takes two people) Install the pads in the Caliper then install the Caliper. Make sure the brake fluid is topped off. Start the vehicle and pump the brakes 3 to 4 times then hold the brake pedal down. The person on the outside releases the Bleed valve, in this process the brake pedal will go to the floor, Once the Pedal is all the way down close the valve and repeat the process checking to make sure the Fluid is topped off after each attempt. Repeat the process until only fluid comes out when you open the bleed valve. This usually takes 2 to 3 cycles. Once the air is removed from the caliper and brake line top off the fluid one last time and install the tire.

Oct 11, 2010 | 2004 Dodge Ram 1500

1 Answer

Front end vibrates when braking at highway speeds


Most common cause for this is rotors that have become warped. It is not uncommon if you drive fast and brake hard OR live in hilly country or with heavy loads. The brakes get hot - the more they are used the hotter they may get. When they cool they do not cool evenly. If there is enough of the rotor left it may be resurfaced to true it. However - the thinner it gets the less heat it can handle. When rotors reach a minimum thickness (stamped on the rotor) they must be replaced.

Jan 16, 2010 | 2006 Dodge Ram 1500

2 Answers

03 Ram 1500 E-Brake light flashing


its possible the switch on the e/brake unit broke, take a flashlight and locate a single/double wire that goes to the e/brake assembly (this is the piece you depress with your left foot) and look to see if the wire is broken or the switch the wire goes to is broken.

Dec 15, 2009 | Dodge Ram 1500 Cars & Trucks

3 Answers

2000 Chevrolet Silverado 1500 brake release cable broke and won't release the emergency brake. I checked the brake release handle and cable and discovered a small nut like metal piece on the floor below...


Same thing happened to me on my 2000 silverado July 3, 2009.
There is a release next to the parking brake pedal. You have to reach way under the dash but it has worked for me for the last month. I have the part to fix it but haven't had the time.

Jul 12, 2009 | 2000 Chevrolet Silverado 1500

2 Answers

Can't open quad cab door on 1998 dodge ram 1500


The bottom latch was rusted locked. I had to pull on bottom rod after top was already released and kick out the bottom of the door. I had to replace the bottom latch.

Nov 05, 2008 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...