Question about 1999 Ford Expedition

Open Question

2000 expedition shift linkage adjustment

How to adjust

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 74 Answers

SOURCE: 2000 kia shift lever not in sync with position indicator

i beleive your talking about the neutral saftey switch yes it can be adjusted just tak a look under the plastiques

Posted on Jun 18, 2009

  • 508 Answers

SOURCE: wont fully engage in first gear

More than likely you have a five speed in your vehicle. A very hard item to find in an Expedition. There is no adjustment unfortunately. Sounds like you have a bent shifter fork internally in the transmission. This will require removal and a tear down of the tranny to correct. Good luck. Let me know what you discover.

Posted on Feb 09, 2009

chuck943
  • 783 Answers

SOURCE: transmission on a 1983 f100 with a overdrive

The best way to adjust it is to hook a pressure gage to the TV pressure port located on the left side of the transmission just ahead of the linkage. You want it to be a zero at idle but pressure starts moving as soon as you move the linkage.

Posted on Jun 14, 2009

harley9701ha
  • 424 Answers

SOURCE: 2000 expedition pedal adjustment is stuck. Any ideas?

If the brake pedal makes a crunching noise,try flushing out the brake fluid. For some reason after flushing the noise goes away. I hope this helps,goodluck.

Posted on Aug 01, 2009

  • 65 Answers

SOURCE: shifting cable/shifting linkage adjustment

Try loosening the nut for the cable. Shift into park from under hood. Put shifter in park and pull cable, push nut towards cable and tighten nut.

Posted on Aug 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust the shifting cable on my 2000 dodge intrepid


If its an automatic, which im sure it is. You can adjust the cable by first that the vehicle doesn't have to be running to do this. Find the transmission after raising hood. Should be easy to see. On top of it you'll see a possible L - shaped lever bolted down with what should be your shift cable. Turn the ignition on but dont start. Undo the shift cable from the linkage and by hand turn the linkage down, shifting through all the gears till in low. Reach inside the car and put shifting lever in low. Hook shift cable back to linkage and from inside put in park. That should work

Jun 08, 2015 | 2000 Dodge Intrepid

1 Answer

Why won't my 2001 Ford Expedition shift into park?


If you Expedition is anything like my '99 Ranger, you have to have your foot on the brake to get it into "PARK". If you are doing that, then you have a transmission shift linkage adjustment problem that can happen if you have had your transmission removed or replaced, in which case I would have the shop that did the work adjust that linkage...no charge.

Mar 03, 2015 | Ford Cars & Trucks

1 Answer

How to adjust the linkae on a 99ford exeditin tritonv8


nice spelling. shift linkage? there is no adjustment and more than likely the exhaust manifold melted the cable.

Sep 22, 2014 | 1999 Ford Expedition

1 Answer

How do i adjust trans linkage on 2000 ford escort


The linkage must have worn parts, check all the rubber couplers on the shift rods for excess wear.

Jul 15, 2014 | 2000 Ford Escort

1 Answer

Transmission not leaving first gear


SOunds like the linkage needs adjusting. If it don't catch until it is in first gear, that is why it isn't shifting. Hopefully adjusting the linkage will allow it to catch in drive and then you will shift fine.

Good Luck

Dec 15, 2009 | 2000 Ford Econoline

1 Answer

My 2000 Ford Expedition XLT will not go into P,R,N,D,2 and 1..


You know,i had kind of the same problem with my 2000 f150,just incase you didnt check this,look under the dash at the bottom of the steering column,there is a bracket that bolts on with 2 torque bolts at ( t-25 or t-30) the shift cable connects to that bracket and when it loosens up it wont go into park or if loose enough it may not shift to reverse either.An easy way to tell if its loose is if the shift lever feels loose or real easy to move.Also at the transmission where the shift cable connects there is a plastic holder with groves on it for adjustment,dont try adjusting it but inspect it if its loose or broken,if you try adjusting it then its tough to get it back where it needs to be for all the gears to work with the shift indicator tab,about it not starting,that may have to do with the safety neutral switch on the transmission,but double check the linkage to make sure its really tight before worrying about that switch,im not always on line these days but i will help more when i can.Good luck

Nov 08, 2009 | 2000 Ford Expedition

1 Answer

Shift indicator is misaligneg in my ford expedition 1999


have the shift linkage adjusted,make sure when you put it in park it doesnt roll away on you,which just happened to me in my 2000 f150,to be safe set the emergency brake until it gets fixed.

Sep 26, 2009 | 1999 Ford Expedition

1 Answer

Shifting cable/shifting linkage adjustment


Try loosening the nut for the cable. Shift into park from under hood. Put shifter in park and pull cable, push nut towards cable and tighten nut.

Aug 12, 2009 | 2000 Ford Focus

Not finding what you are looking for?
1999 Ford Expedition Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...