Question about 2001 Mercedes-Benz S-Class

Open Question

S320 mercedes abs pump stays on

Abs /esp hydraulic pump wont shut pump

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jonathancole
  • 127 Answers

SOURCE: malfunction light on showing ABS, ESP, BAS. Car

abs brake speedsensor this has happend to me before

Posted on Aug 12, 2009

lastech
  • 408 Answers

SOURCE: ABS light intermittent on 1995 Mercedes C280

hello,good day,try to clean your abs sensor and rotor,apply with wd 40 then cean with compress air,also check electrical connection,for your radio please recheck the power supply specially the parking light wiring,ty

Posted on Aug 15, 2009

bunnydawg
  • 5158 Answers

SOURCE: 96 MERCEDES S320 WATER PUMP

once that starts leaking you have no choice but to change the water pump. you can leave it for abit... but suddenly it will leak at a rather rapid rate.... considering the damage that can be done from overheating the motor.... having the water pump changed would be a better investment.

Posted on Apr 16, 2009

taran_2005
  • 10515 Answers

SOURCE: abs light and esp light

Hi,

It seems that there was a DC and the chat was Disconnected.



These lights are most often caused by a faulty brake light switch. However, to be sure, it would be best to have the ABS control module scanned using an MB-compatible scan tool that can communicate with more than just the engine control module. The scan tool will also be necessary to turn the light off, even after the repair is completed.



For information's sake, the brake switch is less than $25, and takes about a half hour labor to install.


Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Oct 27, 2009

  • 165 Answers

SOURCE: My Mercedes ML 270 cdi ABS etc lights and gearbox.

  • you need a Brake safety switch replaced.This is located behind you brake pedal.it's a common problem. The warning lights will reset after a few engine starts.

Posted on Nov 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset the abs and esp light on an Mercedes e270 chi from 2004


You can reset all lights by disconnecting the negative lead to your battery for about 30 seconds. This will reset them but if the problem is not fixed they will come back on in about 50 miles.

Feb 28, 2015 | 2004 Mercedes-Benz Mercedes Benz E Class

1 Answer

I have a 2000 Mercedes E430 base sedan. Last week I replaced the brake light switch because it was out and it solved the problem to the point that I can now put my car into gear and drive it, however, as...


Brake light switch problem may cause the ESP / BAS lights to illuminate.

Common symptoms of a bad
Mercedes brake light switch.
  • Car stuck in Park.
  • ABS ESP ETS lights come on.
  • Can not move the shifter from Park to Drive.
  • Brakes Defective Warning on Instrument Cluster
  • Car won't shift gears. Stuck in 2nd gear, limp mode.
  • Brake lights don't work. (Brake light switch can still be defective even if the brake lights work. Checking the brake light operation is not a good test.)
  • ESP, BAS, ABS lights turn on. Car won't shift properly. Stuck in gear.


TEST: To test your new brake light switch: Turn you car off to reset the ABS light. apply the parking brake. and start the car in neutral or park without using the brake. if the problem is the brake light switch... the light will only come on when you press the brake pedal.

If you replaced the brake light switch and the light is still on you should check a few other things such as:

  • Fuses and Relays
  • ABS pump
  • ABS wheel speed sensor
  • Brake Fluid Level
  • Get an advanced scanner to read trouble codes.


NOTE: ** You may need a MBZ scan tool to reset the error code which was stored in the ECU because of the bad brake light switch.

Feb 25, 2015 | 2000 Mercedes-Benz E-Class

1 Answer

My esp light is on my 03 VW Jetta vr6 What do I need to fix this


most likely the problem is the ABS hydraulic pump. Need to replace it.
I would have the dealer scan the ECU first to make sure so you don't waste money, but all I have see were the ABS pump

Mar 15, 2014 | Cars & Trucks

1 Answer

ABS BAS and ESP warning lights stay on


failing relay should be in a box down the side of the pump.

Dec 21, 2013 | Mercedes-Benz ML320 Cars & Trucks

1 Answer

Need to find the location of the ESP module


It is attached to the ABS hydraulic control unit under the hood.

Sep 17, 2012 | 2000 Mercedes-Benz S-Class

1 Answer

What does ESP light mean on a cls 500 Mercedes Benz


The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty.
You should access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Check & replace if necessary the brake pedal switch placed above pedals on the support.

If the problem still occurs you should access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS & ESP ECU, and reset it.


tdisline_516.jpg

Feb 10, 2012 | 2006 Mercedes-Benz Mercedes Benz CLS500

3 Answers

My Mercedes ML 270 cdi ABS etc lights and gearbox.


  • you need a Brake safety switch replaced.This is located behind you brake pedal.it's a common problem. The warning lights will reset after a few engine starts.

May 18, 2009 | 2002 Mercedes-Benz M-Class

1 Answer

Abs light wont go out


When u power up the vehicle ABS does a self test(light stays on a few seconds then cuts off) and if it see's a problem will shut off and illuminate the ABS lamp. It will also do a second test on iself when you reach a speed of around 12-15 mph,it will run the pump for a few seconds to check pressure and look at the speed sensors,if it see a problem here it will again shut down and illuminate the ABS light.
Now if the red brake lamp is on then it will shut down because it thinks you have a hydraulic concern and will not try and run ABS if this is the case.
If red brake lamp is on most likely if you have good brakes it is a problem with the float sensor in the master cylinder reservior,maybe its bad or just stuck,or just low on fluid.

Feb 12, 2009 | 1992 Ford F250

1 Answer

1996 mercedes E-CLASS ABS LIGHTS ON AS I START TO DRIVE


you should be able to pulse the pump in actuator tests you can test the signal at the same time.your cruise wont work if the abs isnt working it takes the readings from the wheels,check your power and earths at the pump.

Dec 29, 2008 | 1996 Mercedes-Benz E-Class

Not finding what you are looking for?
2001 Mercedes-Benz S-Class Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...