Question about Chevrolet TrailBlazer

Open Question

Removal of oil pan on 2004 trailblazer four wheel drive with 5.3L engine

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 27 Answers

SOURCE: 2.2l toyota camra engine has pressure leaking from engine when oil fill is removed from valve cover, is this normal, i also have small oil drip at pan gkt.

replace the pcv valve. If it is not working it will allow pressure to build up in the crankcase. this will cause leaks everywhere.

Posted on Jun 29, 2008

Ad
Psych0Thrash
  • 53 Answers

SOURCE: 2000 7.3 Liter diesel engine needing oil pan replacement

sadly I don't think there is. The oil pan is huge and sections of the frame are in the way of getting it in and out without damaging the pan severly. pulling that massive engine and replacing the pan, then putting the engine back in and reconnecting everything in 14 hours is a good estimate. sorry for the bad news

Posted on Aug 18, 2008

  • 105 Answers

SOURCE: oil pan removal for 1994 k1500 4WD

You should be able to drop the front drive and pull the starter you should be able to drop the oil-pan without to much trouble

Posted on Mar 25, 2009

  • 4 Answers

SOURCE: how to remove the oil pan on a 2004 dodge ram 2500 diesel

I'd recommend getting a service manual first. I got one for my 2005 2500 cummins from www.promanuals.net. I also had to to remove the oil pan and replace it with another one.

Posted on Jun 20, 2009

  • 85 Answers

SOURCE: Oil Type for Chevy Blazer 2004

5w 30

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 trailblazer will not engage into 4 wheel drive but will work in reverse.


look under the front end and you will see a unit on the front axle that runs thru the oil pan, they had a lot of problems with this set up

Feb 09, 2015 | 2004 Chevrolet TrailBlazer

2 Answers

How do i remove the oil pan to get to the oil pump on a 1992 chevy s10 pickup 4x4


pick your battles cause your really going to have a ruff time of it. chassis in the way for the most part. you choose best way for you to do it.

May 24, 2014 | 1992 Chevrolet S-10

1 Answer

Taking oil pan off my 1997 model chevy with a 4.3 vortec motor


You have to remove both engine mount bolts, then jack the engine up until it starts lifting the truck. The pan still will not come out until you pry it out. Be careful. You will also have to pry it back into place. If it is four wheel drive, remove the front differential first.

Apr 03, 2014 | 1997 Chevrolet K1500

2 Answers

Where is the transmission drain plug for 2004 trailblazer


Hi.

The Trailblazer transmission has no factory installed drain plug. To drain the ****** fluid you need to work from underneath the truck and drop the transmission pan off.

Regards.

Ginko

Sep 20, 2011 | 2004 Chevrolet TrailBlazer

2 Answers

I have a chevy trailblazer and the 4x4 is not working. lights come on but the front wheels are not pulling.


The Selectable Four Wheel Drive (S4WD) system uses an actuator located on the right side of the engine oil pan to engage and disengage the front drive axle. This actuator, or the mechanizm that it connects to is probably malfunctioning. If your light is coming on, most likely the problem is NOT in the transfer case.

Mar 12, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

Low oil pressure warning light comes on. oil level is ok


four theories.. two easy.. two not so easy.
one. oil filter is plugged.- change the filter
two. the pick up screen in the oil pan is clogged.- remove oil pan(if you go this far change the oil pump on speculation)
three. the oil pump itself is worn out of tolerance.- remove oil pan, change pump
four. the sensor is defective- change the sensor on side of engine.

Dec 31, 2010 | 2004 Ford Taurus

1 Answer

What is involved with replacing the oil pan on 1998 GMC Sierra?


  • Step 1 Raise the truck using the proper equipment. Use a ramp or a jack and jack stands to support the vehicle securely by following all directions for use provided by this equipment's manufacturer.
  • Step 2 Drain all oil from the Silverado by placing an oil drip pan under the vehicle's engine block, directly under the oil drain plug. The drain plug is located on the oil pan, between the vehicle's tires underneath the vehicle. Use a wrench to loosen and remove the plug allowing the oil to drain into the pain below.
  • Step 3 Notice the various items attached to the oil pan or in the way of the oil pan dropping. For the oil pan to drop, remove the negative battery cable, front differential (only for four-wheel drive vehicles) and the under body shield by using a wrench or socket set.
  • Step 4 Remove the oil pan shield by loosening the four bolts holding it in place along the edges of the shield. Then, remove the cross brace, oil filter, the transmission to oil pan bolts and the oil level sensor.
  • Step 5 Follow the removal of those pieces by removing the bolts from the two front wiring harness, the engine wiring harness retainer, engine oil cooler pipe to oil bolts and the transmission oil cooler pipe retainer using a wrench. Located the closeout covers and bolts located on each side of the engine and remove them.
  • Step 6 Disconnect each of the oil pan bolts using a wrench that will allow the oil pan to drop. The oil pan gasket will also fall off and replacement should occur before reinstalling the oil pan.


  • Read more: How to Drop the Oil Pan in a Chevy Silverado | eHow.com http://www.ehow.com/how_4508109_drop-oil-pan-chevy-silverado.html#ixzz0wi82Ul2u

    Aug 15, 2010 | GMC Sierra 1500 Cars & Trucks

    1 Answer

    I have a leak in the body of the oil pan on my 2004 chevy suburban 2 wheel drive. It is a hairline crack. Do I have to remove the entire engine to install a new oil pan? Can the frame cross member be...


    YOU NEED A REPAIR MANUAL BECAUSE YOU HAVE A FEW THINGS YOU HAVE TO DO TO REMOVE OIL PAN.FIRST OF ALL YOU HAVE LOWER FRONT DIFFERENTIAL CARRIER WITH FLOOR JACK IF YOU HAVE 4WD VECHICLE..DISCONNECT THE FRONT EXHAUST Y PIPE FROM THE ENGINE AND THE EXHAUST SYSTEM.YOU HAVE TO REMOVE OIL PAN SKID PLATE.AND THE LOWER CONTROL ARM CROSS MEMBER FROM BELOW THE OIL PAN.

    May 05, 2010 | 2004 Chevrolet Suburban

    4 Answers

    Four-wheel drive will not work and is not transfer case, could be a fuse?


    IT COULD BE A FUSE THERE ARE FUSES UNDER THE HOOD FOR 4 WHEEL DRIVE ALSO IF THAT DOED NOT WORK CHECK 4 WHEEL DRIVE SELINOID

    Dec 13, 2009 | 2002 Chevrolet TrailBlazer

    1 Answer

    Need to change oil pan


    e
    Cavalier, Sunfire 2001-2005

    Oil Pan - Removal & Installation

    2.2L (VIN 4) Engine
    1. Before servicing the vehicle, refer to the precautions section.
    2. Drain the engine oil.
    3. Remove or disconnect the following:
      Negative battery cable Right front wheel Right inner fender splash shield Starter motor and bracket Engine mount strut bracket Oil pan
    To install:


    672c0b8.jpg

    Fig. Exploded view of the oil pan mounting and related components-2.2L (VIN 4) engine
    1. Place a 2mm bead of RTV sealer to the oil pan sealing surface except at the rear seal mounting surface. Using a new oil pan rear seal, apply a thin coat of RTV sealer on the end down to the ears.
    2. Install or connect the following:
      Oil pan with a new gasket. Torque the nuts and bolts to 89 inch lbs. (10 Nm). Engine mount strut bracket. Torque the bolts to 49 ft. lbs. (66 Nm). Starter motor and bracket. Torque the bolts to 37 ft. lbs. (50 Nm). Right fender splash shield Right front wheel. Torque the nuts to 100 ft. lbs. (140 Nm). Negative battery cable
    3. Refill the crankcase.
    4. Start the vehicle and verify no leaks.
    2.2L (VIN F) Engine
    1. Before servicing the vehicle, refer to the precautions section.
    2. Drain the engine oil.
    3. Remove or disconnect the following:
      Engine mount strut bracket Drive belt Lower then upper AC compressor bolts Oil pan bolts Oil pan

      1c9e9c9.jpg

      Fig. Remove/Install the oil pan bolts in this sequence-2.2L (VIN F) engine
    To install:
    1. Apply a 2 mm bead of RTV sealant around the perimeter of the oil pan and the oil suction port opening. Do not over apply the RTV. More than a 2 mm bead is not required.
    2. Install or connect the following:
      Oil pan and tighten the bolts to 18 ft. lbs. (25 Nm) AC compressor bolts Engine mount bracket Drive belt
    3. Refill the crankcase.
    4. Start the vehicle and verify no leaks.

    2.4L Engine

    1. Before servicing the vehicle, refer to the precautions section.
    2. Drain the engine oil.
    3. Drain the cooling system.
    4. Remove or disconnect the following:
      Negative battery cable Flywheel/converter cover Right wheel Right wheel well splash shield Accessory drive belt Air conditioning compressor lower bolts Transmission-to-engine brace Engine mount strut bracket Radiator outlet pipe bolts Radiator outlet pipe from the oil pan Oil pan to the flywheel cover bolt and nut Flywheel cover stud for clearance Radiator outlet pipe from the lower radiator hose and oil pan Oil level sensor connector Oil pan
    To install:
    1. Inspect the oil pan gasket; it is reusable if not damaged.
    2. Install or connect the following:
      Oil pan with the gasket. Torque the M8 bolts to 18 ft. lbs. (24 Nm) and the M6 bolts to 106 inch lbs. (12 Nm).

      2ffc5e9.jpg

      Fig. Oil pan fastener torque specifications-2.4L engine
      Oil pan to the transmission nut Oil level sensor connector Radiator outlet pipe to the lower radiator hose and oil pan Exhaust manifold brace Radiator outlet pipe. Torque the bolts to 124 inch lbs. (14 Nm). Engine mount strut bracket. Torque the bolts to 55 ft. lbs. (75 Nm). Transmission to the engine brace Air conditioning compressor lower bolts. Torque the bolts to 37 ft. lbs. (50 Nm). Accessory drive belt Right splash shield Right front wheel Flywheel/converter cover Negative battery cable
    3. Refill the crankcase.
    4. Refill the cooling system.
    5. Start the vehicle and verify no leaks.

    Hope helped (remember rated this help). Good luck.

    Oct 22, 2009 | 2001 Chevrolet Cavalier

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    102 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6924 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...