Question about Cars & Trucks

1 Answer

Walthers Rail Crossing System


Posted by on

  • 1 more comment 
  • Anthony Morris
    Anthony Morris Feb 23, 2012

    Hi, No it is an EBay Item 'HO Walthers rail crossing plus Guard rails" was sold without the Instructions to assemble this Kit. it was mentioned in the Advert. I am trying to find a copy of these instructions to assemble it. Maybe if i give you this ebay items number , then you could see /read the advert. and photo. Advanced Search feature in EBay should point you to this item. :number: 180816001417.. thanks in advance, Anthony

  • Vlad Mototolea
    Vlad Mototolea Feb 24, 2012

    Sorry, can't find it anywhere... try to ask these people if they have it

  • Anthony Morris
    Anthony Morris Feb 24, 2012

    All Ok I did an EBay search and someone has the Instructions as one of the posted pictures in their advert,, Anthony,



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 226 Answers

Didn't the vendor have it?

Posted on Feb 23, 2012

Testimonial: "the Question asked helped me to ask the required questions to help fix my problem. Thanks Viad"


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I am looking to replace a leaking fuel injector rail for 1993 fifth ave chrysler new yorker p/n 4554109

The rail is most likely not the problem, the fuel injector "O" ring seals are likely the problem in the rail.

Mar 04, 2017 | Chrysler Fifth Avenue Cars & Trucks

2 Answers

Were is fuel pressure regulator 1994 chevy k3500.truck is flooding out and wont start.

If it's injected then it's located on the fuel rail. If carbureted, the floats sunk.

Jan 22, 2017 | Chevrolet Cars & Trucks

1 Answer

Can't find instrutions for Revell '64 Pontiac GTO 85-2461 can I get a free copy so I can put my model together?

This might work for you:

Apr 13, 2015 | Pontiac Cars & Trucks

1 Answer

My girlfriend had a friend start work on her 99 Buick LeSabre. He tore the intake cover off, all the fuel rail, the spark plug wires off, broke a plug in the block, pulled the alternator off, as well as a...

Hi Jason,here's a link on your fuel rail,Here's a link on your spark plugs,Why was he working on it to begin with?Here's how to put your alternator back on.Need more help,let me know.

Aug 17, 2013 | 2000 Buick LeSabre

1 Answer

I purchased a Hyundai 00285-03006 fully enclosed luggage carrier and the instructions are one picture with no words. The picture does not describe where the carrier is in the picture, where the rails fit...

That same luggage carrier is sold (as OEM approved equipment) for MANY different makes and models of automobiles. From what I can see, it simply clamps onto the cross-rails on your luggage rack. (Not much instruction needed) It does require however, that you have a luggage rack and a cross-rail kit. The cross-rail kit is sold separately. I would give you the part number, but the cross-rail kit varies depending on your make, model, and year.


Cross-Rail Kit


May 22, 2011 | Hyundai Veracruz Cars & Trucks

2 Answers


actually you can seat the injectors first then place the rail on top of it ,, or you can place the injectors in the rail,and place the entire thing in.
ps use a bit of motor oil to hold the plastic raisers for the injectors in place.

Apr 04, 2011 | Chevrolet Camaro Cars & Trucks

1 Answer


usually caused by leaky injectors. Pull the fuel rail off leaving injectors intact on the rail. Cycle the key on and off seveal times to pump up the system. Replace any injectors that leak. Let me know if you need instructions. OK?

Nov 01, 2010 | 1991 Ford F250

2 Answers

AC not blowing cold

Check to see if your AC compressor is turning, If it is then you need to refil system with freon equivalent thru the low pressure port. The kit you get will only let you put it on the low presure line. You can pick the lit up at any auto supply store. just folow the instructions on the kit. If the compressor clutch is not engaging check AC relay

Aug 13, 2010 | 1987 BMW 3 Series

1 Answer

Stereo Upgrade in 1997 Sentra

hi there. I am not sure about the speakers. But there is a wiring harness available for a aftermarket head unit. I have a '97 sentra the base model XE version. I have just put in an alpine head unit and you defenately hear the difference even on factory speakers. But you will need 2 kits to install an aftermarket head unit in the car. 1. A dash kit. I got mine from canadian tire for about 20 bucks, it comes with instructions on how to put it together and its straight forward, just make sure u get the one for your year and make of car.

2. The wiring harness. there available at mostly every car audio place for about 10 bucks. again make sure u get the one for your year make and model of car. installing this is difficult so unless your good at electronics get it professionally installed. you have to splice the wires into the back of the aftermarket unit, then the plugs plug right into your existing factory car harness.

hope this solves your problem, the dash kit is easy to put together and install into the car, but the wiring harness is a bit difficult, i had my harness installed for about 40 bucks and u save money if u put the dash kit togehter yourself because thats 1 less thing they have to do. good luck.

Nov 29, 2008 | 1997 Nissan Sentra

1 Answer

Buick regal1999

i gaurantee that it is the fuel pump ressistor up on the passenger side front behind head lamp assembly you will find the connector with two wires going to it. no need to remove old one install new one and connect wires to new one leave old in. dealer only part but not expensive. dont belive dealer when they try to talk you out of it. This is a kit to relocate a ressistor that has been installed in a poor location. I promise this will fix it. My wifes car did the same thing, took 20 minutes to fix and that is only because i am an electrician and am finicky about where to locate wires etc. the kit comes with installation instructions however they are a little vague. trust me. easy fix. my dealer tried to get me to leave car for repair and said it sounds like the theft detterent system. they were wrong and i was right. dont trust em

Jul 09, 2008 | 1999 Buick Regal

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13685 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides