Question about Cars & Trucks

Open Question

4zz engine torque specs and diagram

Torque settings

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Torque spec for flywheel bolt: Isuzu 2.5 diesel engine

normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.

Posted on Aug 15, 2008

Ad
johnny5846
  • 379 Answers

SOURCE: Looking for the torque specs for 1998 chevy astro van?

1998 chevy astro 4.3 v6 torque specs include :
* foot pounds *
balance shaft (if equiped) gear bolt = step 1 = 15 ft.lbs. step2 = additional 35 degrees.
camshaft sprocket bolt = 18 ft. lbs.
connecting rod cap = step 1 = 20 ft. lbs. step 2 = additional 70 degrees.
crankshaft damper bolt = 74 ft. lbs.
crankshaft oil deflectorbolt/nut = 27 ft.lbs.
cylinder head bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees. (tighten in sequence)
2811243.jpg


exhaust manifold bolts = step 1 = 11 ft. lbs. step 2 = 22 ft. lbs.
flywheel bolt = 74 ft. lbs.
main bearing cap bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees.
oil filter adapter bolt = 15 ft. lbs.
oil pan bolt/nut = 18 ft. lbs.
oil pump bolt = 66 ft. lbs.
rocker arm with press in studs = 18 ft. lbs.
rocker arm with screw in studs = 19 ft. lbs.
valve lifter retainer bolt = 12 ft. lbs.
water pump bolt = 33 ft. lbs.
* inch pounds *
balance shaft retaining plate bolt = 106 in. lbs.
camshaft retainer plate bolt = 106 in. lbs.
front cover bolt = 106 in. lbs.
intake manifold upper = step 1 = 44 in. lbs. step 2 = 88 in. lbs.
intake manifold lower = step 1 = 27 in. lbs. step 2 = 106 in. lbs. step 3 = 133 in. lbs. ** (tighten bolts in sequence)

cbb8861.jpg

thanks for your vote !

Posted on Dec 28, 2008

GM Elec
  • 1000 Answers

SOURCE: torque specs for 2000 chevy silverado truck 4.3 v-6 engine

Not sure what torque spec's your looking for.
Go to www.AutoZone.com, enter your vehicle information and check specifications. You should be able to look up the torque spec's your looking for.
Good luck.
Regards,

Posted on May 02, 2009

SOURCE: need torque specs for a 85 s10 chevy with a 2.5 engine?

here you go!

1dd4f4a.gif93a64e1.gif

Posted on Jun 21, 2009

terseo
  • 92 Answers

SOURCE: torque specs for 1998 tercel 1.5L

Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Posted on Sep 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4zz-fe engine torque for corolla engine for south africa


will a toyota corolla haynes repair manual pdf
covering the 4zz-fe motor
do for you

Toyota Corolla - Manualov.net

manualov.net/Toyota/Toyota73.pdf


26313327-eannglbp2b1gdiwnyfp3jmdj-5-0.jpg

Oct 16, 2016 | Cars & Trucks

1 Answer

96 ford explorer Manual trans. 2 door 6 cyl. 2 wheel drive repair diagrams


As per what you requested Transmission to engine bolts: 35 lb-ft (E/MWM).

But if you need more torque specs for other parts of your vehicle.I suggest you to check the link below with complete torque specification list and helpful diagrams.
http://www.allcarhelp.com/2016/05/torque-specs-for-bolt-size-of-bolts.html
This will help.
Thanks.

May 08, 2016 | 1996 Ford Explorer

1 Answer

Torque settings for chevy spark b12d engine . Please


Torque Specs
These specs may not be correct for your application.
Verify your engine specs with a service manual for your year and model

Small Block Chevrolet V8 Engine Specs Torque Specs Cylinder Numbering...

Nov 27, 2015 | Cars & Trucks

1 Answer

How do I tighten crank shaft of Toyota corolla 1,4 4zz engine(tightening toque value)


4zz , first post ever with some one how knows what is there
bravo that. but skips year, so is it a 2000 year?
what country? this is a USA web site, so...... what country.

  • 2000 - 1.4 L (1398 cc) 4ZZ
year 2000? corolla.
so says wiki,
crank pulley, big nut torque.
ill log in for you, and read, just because you said 4zz (rare)
ahh, cwap, only 4 engine used here, non, 4zz
80 to 102 ft/lbs for all non 4zz
i can find in usa, so I googled for you
and 1st hit , landed this, im I a magic typer?

http://www.andriuz.skynet.lt/soft/auto/corolla/COROLLA%20ENGINE%20&%20CHASSIS%20MANUALS%20&%20SUPPLEMENTS/COROLLA%20ENG%20MANUAL%203ZZ-FE%20%26%204ZZ-FE%20RM928E32.pdf

102 it says.
i recommend buying a real FSM for your car , for your country.
and WIN.

Nov 08, 2014 | Toyota Cars & Trucks

1 Answer

HOW TO SET CAM TIMING ON TOYOTA RUNX 4ZZ



Information how to set timing for toyota corolla 4zz engine.

Jul 21, 2012 | Toyota Corolla Cars & Trucks

1 Answer

Need torque specs for 1995 Isuzu trooper, 4wd, 3.2 lt engine, flexplate installation


Hi, there are the torque specs for you engine, and a diagram showing the proper sequence, there are 2 different size bolts, used,M8 and M11, the diagram will show you the locations .
ameezle.png


ameezle_0.png

May 27, 2011 | Isuzu Trooper Cars & Trucks

2 Answers

Need the torque settings for a '94 cutlass supreme sl 3.1 in reference to the cylinder heads I need the sequence and the torque if possible a diagram


Heres the diagram and specs for the cylinder head and also i have enclosed the torque specs for the intake and its tightening sequence, good luck and hope this is helpful, have a good day.
Cylinder head bolts. Step 1) tighten to 44 ftlbs.
Step 2) tighten an additional 95 degrees.

Lower intake bolts. Step 1) all bolts are tightened to 115 inch lbs.


Upper intake bolts.Step 1) all bolts tighten to 18 ft,lbs no diagram, start in the middle and work your way out going cris cross.johnjohn2_88.gifjohnjohn2_89.gif

Mar 19, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

Torque Settings on a 1994 BMW 318i?


The torque settings is more know as torque spec's, and it just means an exact measurement of how tight a paticular part is tightend. With a new engine, many differnt parts have differnt specs, but hands down the single most important thing would be the cylinder head to engine block torque. This is often done in a 3 step process, using a torque wrench, and a torque angle gauge. Are you planing on installing an engine yourself? I can get specs for you.

Mar 08, 2009 | 1996 BMW 318

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...