Question about 1997 Ford Explorer AWD
I think you are hearing the electric fuel pump running, when they get old they can get fairly noisy and it is buzzing sound.
Posted on Feb 23, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
CHECK YOUR UNIVERSAILS COULD BE WORN OR DRY U NEED TO PULL OUT THE SHAFT TO CHECK PROPLEY CHECK FOR STIFFNESS AND NOTCHEY MOVEMENT
Posted on Dec 16, 2008
Try lubing any bushings with a silcone spay lube i have ran into this before and the bushing on the sway bar links get dry and make a squeeking noise.
Posted on Jan 08, 2009
I had the same problem. It would squeak kinda bad when I pull in my driveway. My cv boots were good. I found the ball joints were getting wore out, as well as the shocks were over 10 yrs old. I replaced the ball joints and shocks. I know my squeaks stopped, I personally believe it was the shocks that fixed my squeaking.
Posted on May 20, 2009
Only thing that comes to mind with description is maybe heat shield on exhaust, getting loose. Wait until vehicle is cooled off and get under there & check any heat shields you see wrapped around or near exhaust, above it attached to floor of vehicle etc, and give them all a little shake or rap with rubber hammer or similar to see if any rattles are present.
Posted on Aug 24, 2009
Tips for a great answer:
Aug 02, 2012 | 1999 Ford Explorer
Jul 24, 2012 | Ford Falcon Cars & Trucks
Jul 03, 2011 | Ford E-350 Cars & Trucks
Feb 21, 2011 | 1998 Ford Explorer
Oct 05, 2010 | 2004 Ford Explorer
Jun 07, 2010 | 1999 Ford Explorer
Aug 24, 2009 | Ford Expedition EL Cars & Trucks
Jun 16, 2009 | 2006 Ford Explorer
318 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: