Question about 1996 Ford Explorer

1 Answer

How do I get the numbers for the button lock on my driver door

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

I had the same problem call the FORD DEALERSHIP gave the V I N # THEY GAVE ME THE CODE hope this helps

Posted on Mar 01, 2012

  • daniel Mar 01, 2012

    oh and if you have the FORD BOOK that come with the explorer the code is in there also on CARD PLASTIC LIKE A SMALL CREDIT CARD

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do my 2002 BMW 530i door locks inconsistently lock or unlock (front and/or back doors) when locked by electronic key signal or manual key turn in door but not when interior lock button is pushed?


Looking for PSD Fake ID Template? IDTEMPLATEPSD.COM is the number 1 source for PSD Fake ID Template! They offer top quality Driver License,Credit Card,Utility Bill,Birth Certificate etc. Instant delivery via email with excellent customer support . You can find them here- http://idtemplatepsd.com

May 01, 2014 | Cars & Trucks

1 Answer

Door Lock does not work


I want to know what's the fuse number for my window wipers on my 2005 ford explorer

Jan 22, 2014 | Hyundai Accent Cars & Trucks

1 Answer

Replaced batery in key fob and now there is no connection between fob and security system...I can lock and unlock doors with the key and I can start car ...fob doesn't work; does not lock or unlock...


reprogram the remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times. insert key into ignition switch. switch ignition on and off twice to program a remote transmitter code whilst erasing the original codes or three timre to check how many remote transmitters are currently registered.remove key from the ignition switch.system should now lock and unlock.twice to indicate programming mode or one to four times,slowly to indicate number of remote transmitters registered.for the solara press and hold lock and unlock remote buttons together, press lock remote button for a second period of 1 second. system should now lock and unlock vechicle.once to confirm, twice to indicate registration has failed.if required repeat button procedure to program remaining remote transmitters.note to exit programming mode close drivers door or insert ignition key.maximum of 4 remote transmitters can be programmed.if akk failed let dealership reprogram remote transmitters.

May 18, 2011 | 1999 Toyota Camry Solara

2 Answers

We can't get the power locks to unlock on rear doors of our 2003 gmc crew cab with remote or door control button. They will lock though no problem with remote and the buttons on either front door.we also...


I fixed my doorlock problem today.It did the same thing as yours,it was the relay for the rear door lock and unlock located on the drivers side of dash by the drivers door.easy cheep fix.hope this helps

Nov 01, 2009 | 2000 GMC Sierra

2 Answers

2007 Lincoln Mark LT Key Fob


Theres only 1 way to tell if it will work - try it :)

Here is the procedure to marry a new remote to your truck.

1. Close all doors and then open drivers door and press the UNLOCK
button on drivers door panel while door is open and insert key in ignition.

2. Turn ignition from OFF to RUN (not start) 8 times within 10 seconds, with the
8th time ending in RUN. Door locks will cycle to confirm programming
mode.

3. Within 20 seconds press any button on first keyless remote.
Door locks will cycle to confirm programming.

4. Within 20 seconds, press any button on second keyless remote.
Door locks will cycle again to confirm programming.

5. Turn ignition to OFF.
Locks will again cycle to indicate end of programming mode.



Both the Escape and LT program the same - the transponder should have the same resistance.


Try it out!!


Thanks for using FixYa - a Very Helpful Rating is appreciated for answering your FREE question.


Aug 04, 2009 | 2007 Lincoln Mark LT 4x2 5.5

1 Answer

Step by step reset the door remote control lexus 400LS


1. sitting in driver seat, with driver's door OPEN, press lock/unlock button ON THE DRIVERS DOOR to lock all doors, then manually unlock driver door only.
2. Insert YOUR key in ignition, DO NOT TURN, then remove key.
3. Using the same lock/unlock button ON THE DRIVERS DOOR, slowly press lock-unlock in 5 cycles
4. Shut door.
5. Open door.
6. Using the same lock/unlock button ON THE DRIVERS DOOR, again slowly press lock-unlock in 5 cycles
7. With the door open insert your key into the ignition, turn to 'on' position (DON'T START), wait 5 seconds. Turn off and remove key.
8. Locks should cycle once (Car will lock and then unlock once by herself). If they don't cycle or they cycle more than once, do steps 1-7 over.
9. Now using the remote, push lock button, hold for one second, then release the button. The locks should cycle once. If not, start over and go slower.
10. Close the door.
11. Open the door.
12. Press the lock button on the remote. The locks should do a lock-unlock cycle.
13. Close the door
14. Press the lock button on the remote, the doors should lock.
15. Press unlock button and the doors should unlock.

Jun 16, 2009 | 1996 Lexus LS 400

1 Answer

Un work of the doors auto control lexus


1. sitting in driver seat, with driver's door OPEN, press lock/unlock button ON THE DRIVERS DOOR to lock all doors, then manually unlock driver door only.
2. Insert YOUR key in ignition, DO NOT TURN, then remove key.
3. Using the same lock/unlock button ON THE DRIVERS DOOR, slowly press lock-unlock in 5 cycles
4. Shut door.
5. Open door.
6. Using the same lock/unlock button ON THE DRIVERS DOOR, again slowly press lock-unlock in 5 cycles
7. With the door open insert your key into the ignition, turn to 'on' position (DON'T START), wait 5 seconds. Turn off and remove key.
8. Locks should cycle once (Car will lock and then unlock once by herself). If they don't cycle or they cycle more than once, do steps 1-7 over.
9. Now using the remote, push lock button, hold for one second, then release the button. The locks should cycle once. If not, start over and go slower.
10. Close the door.
11. Open the door.
12. Press the lock button on the remote. The locks should do a lock-unlock cycle.
13. Close the door
14. Press the lock button on the remote, the doors should lock.
15. Press unlock button and the doors should unlock.

Long beep to follow if successful.

Jun 16, 2009 | 1996 Lexus LS 400

2 Answers

Drivers Door Lock Problem


Press the passenger side door lock button. if the driver side door unlocks now but wont unlock when you hit the driver side door lock button, it is usually a network communication problem with the B CAN or a faulty Body Control Module.

May 01, 2009 | Honda Accord Cars & Trucks

1 Answer

Remote only unlocking 3 doors


HI,WHEN YOU REMOVE DOOR PANEL,AT DOOR LOCK YOU WILL SEE PLUG WITH RED ITEM PULL THIS AND IT WILL RELEASE PLUG, GIVE IT A CLEAN,AND TRY LOCKS AGAIN. ALSO IF YOU HAVE PROBS WITH CODED BUTTONS,THEY DO WEAR,JUST LOOK IN YOUR HANDBOOK,AND CHANGE CODE WITH FRESH BUTTONS.THANKS

Dec 26, 2008 | 2006 Peugeot 604

1 Answer

1999 Grand Marquis remote control - no buttons work


10 year old remotes go bad often, especially due to moisture retention.

Nov 28, 2008 | 1999 Mercury Grand Marquis

Not finding what you are looking for?
1996 Ford Explorer Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...