Question about 2005 Buick Terraza
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how to replace passenger side
Posted on Jan 13, 2011
SOURCE: changing passenger side low beam
there is very little room to gain access to the bulb from behind the headlight assembly.if you remove the plug for the headlight and then slide your hands down on either side of the bulb.there is a lock ring that you must remove(unlock)first.then pull the bulb out and install the new bulb and reassemble in reverse order.NOTE don`t touch the bulb glass with your hands or it can burn out prematurely from the oil on your skin.
Posted on Mar 15, 2011
Tips for a great answer:
Apr 01, 2012 | 2005 Buick Terraza
Jan 14, 2011 | 2005 Buick Terraza
Jan 13, 2011 | 2005 Buick Terraza
Nov 30, 2010 | 2005 Buick Terraza
Changing front, right turn signal on 2005 Buick Terraza:
Open hood; when facing the front of vehicle, the right turn signal is on the passenger
side (left). The headlight assembly
needs to be removed to easily reach the turn signal. On my vehicle, there is a 10 mm screw on the
left side. Remove it. There is L-shaped pin on the right side of
the headlight assembly. Swing the pin counter-clockwise
(to the left). Pull the pin straight up
to remove. The headlight assembly is now
loose, but there is a pin snapped in a socket on the back of the assembly that
still holds the assembly. Pull the
headlight assembly hard and straight to the front of the vehicle. When it snaps loose, the assembly is now held
just by the rubber gasket surrounding the assembly. You need to gently work the right side of the
gasket out of the grill cowling. The
assembly should pull straight out. The
wires are long enough to lay the headlight assembly in the engine compartment. Finally, the turn signal is now accessible. Twist the light holder counter-clockwise and
pull out the light holder. Change the
bulb. Do not punch your man-card for
credit until you have successfully reinstalled the headlight assembly. It goes back in a little easier the second
time. Once you have put the L-pin in
place, the screw back, and successfully tested the lights, you can now punch
I give the mechanical engineers and designers a D-minus instead of an F only because I was successful on the first try. No light bulb on anything commonly used by people should be this hard to figure out.
Sep 07, 2010 | 2005 Buick Terraza
Aug 14, 2010 | 2006 Buick Terraza
Jul 19, 2010 | 2007 Buick Terraza CXL Wagon
Aug 18, 2009 | 2005 Buick Terraza
Feb 18, 2009 | 2005 Buick Terraza
Aug 10, 2017 | 2006 Buick Terraza
Mar 19, 2015 | 2005 Buick Terraza
658 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: