Question about Cars & Trucks

Open Question

Ford fiesta backfireing and EAC fail coming on

Cheacked timing changed spark plugs changed coil and is running like a bucket of ****

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: mk3 ford fiesta spark plugs

honestly fords have been notoreous for there not so well built heads. I would try to lubricate it with a penatrating oil (one that foams works better than wd40) and give it your best shot otherwise find someone who is selling the same head. Also note to put on some anti seize stuff to prevent it from happening again.

Posted on Oct 14, 2008

michigan man
  • 3533 Answers

SOURCE: how can i change my spark plugs on my fiesta mk5 1.4 16v

look up by the fuel rails and you see these funny looking things normally they have two wires on them and the spark plugs are under those and in most cases you have to remove the fuel injecter rails in order to get access to the plugs

Posted on Jan 18, 2009

SOURCE: Ford fiesta 1.4 zetec. Comes up with EAC fail

try pouring some of the gas cleaner in you gas tank when you next fill up and it should make the light shut off. only put half the bottle in

Posted on Mar 03, 2009

  • 1341 Answers

SOURCE: EAC FAIL ON A 2004 PLATE FORD FUSION 2

Yes you need a diagnostic tool to read the error code and from there carry out any repairs.

Posted on Oct 06, 2009

  • 3 Answers

SOURCE: EAC FAIL FORD FUSION 03

I have an EAC failure on my wifes 53 reg Fusion 1.4 and it's been off the road for 2 months. An independent check showed fault code P2135, which relates to the throttle body but fitting a body from a healthy Fiesta with the same engine didn't solve the problem. I was advised to check wiring to the body but all seemed OK. Took car to Ford who stated that the car needs an updated body and wiring and the parts are on back order with first delivery not due until Jan 2010! Why the car won't work with replacement original parts is a mystery. I'm very disappointed with Ford. Sorry this doesn't solve the problem but hope it clarifies the situation. Have logged this on other websites and with BBC Watchdog!

Posted on Nov 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my yukon stay running?


backfiring is flame coming out the inlet manifold ,
timing , valve s are this problem area
check for correct firing order , loose ground wires , problem ignition control module , faulty coil/s could even be weak valve springs

Oct 02, 2016 | Cadillac Cars & Trucks

1 Answer

1.3 1998 ford fiesta runs fine on tick over but missfires when under accelaration


usually a secondary ignition problem(coil pack, spark plug cables).

Apr 13, 2013 | Cars & Trucks

1 Answer

EA FAIL


You need the fault code read that was recorded when the EAC failed.

Jul 14, 2017 | Cars & Trucks

1 Answer

My 2002 crown vic started backfireing then would not start seems to not be getting any gas could this be my coil pack?


It sounds more like a timing belt has failed.
check for spark at the spark plugs
If there is no spark you can have the coils tested
But i till think timing belt due to the back fire and then the no run
If this was helpful please rate this question

Jan 24, 2011 | 2001 Ford Crown Victoria

1 Answer

1995 Mustang Gt hesitates during acceleration w/the occasional backfire, check engine light comes on and off. Replaced spark plugs/wires, dist.cap, rotor, ignition coil, and checked timing. Thinking maybe...


It sounds like it might be runnig lean on fuel. How old is the fuel filter. Lack of fuel will cause this. Ford needs about 40 psi of pressure to run well. So it runs a lot of fuel thru the filter. It should be changed at least every 30,000 ?

May 02, 2010 | Ford Mustang Cars & Trucks

2 Answers

1979 ford pickup 460ci backfired now nospark


the backfire comes from timing, check or replace the coil

Mar 13, 2010 | 1979 Ford F 350

1 Answer

Ford fiesta 1.4 zetec. Comes up with EAC fail message


its a problem with the electronic throttle control (sensor on the accelerator pedal)

Feb 05, 2010 | 2004 Ford Focus

1 Answer

EAC FAIL FORD FUSION 03


I have an EAC failure on my wifes 53 reg Fusion 1.4 and it's been off the road for 2 months. An independent check showed fault code P2135, which relates to the throttle body but fitting a body from a healthy Fiesta with the same engine didn't solve the problem. I was advised to check wiring to the body but all seemed OK. Took car to Ford who stated that the car needs an updated body and wiring and the parts are on back order with first delivery not due until Jan 2010! Why the car won't work with replacement original parts is a mystery. I'm very disappointed with Ford. Sorry this doesn't solve the problem but hope it clarifies the situation. Have logged this on other websites and with BBC Watchdog!

Aug 02, 2009 | 2004 Ford Fusion

1 Answer

Ford fiesta 1.4 o2 reg .


Common thing, water drips from the windscreen washer jets onto the Ht leads and into the spark plugs, New coil, leads spark plugs and new washer jets, Ford are aware of this fault and now sell modified washer jets.

Good luck Davelee.

Sep 11, 2008 | 2002 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...