Question about GMC Cars & Trucks

Open Question

How to reset oil light for 2011 gmc sierra - GMC Cars & Trucks

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 44 Answers

SOURCE: 2003 GMC Sierra 1500HD Panel Lights

Insert key and turn to the position just before start. Dash lights come on... press gas pedal 3 times within a 4-5 second period. Change Oil light should now flash about 4-5 times in confirmation.

Posted on Nov 17, 2008

Ad
  • 71 Answers

SOURCE: 01 gmc sierra how to reset change engine oil light

Turn on the ignition switch without starting the vehicle and mash the accelerator to the floor 3 times slowly and this should reset the change oil sensor.

Posted on Jan 30, 2009

SOURCE: Got oil cahnged and now change oil soon light is

Turn the ignition on and within a few seconds slowly pump the gas pedal three times. A message displaying "oil life reset" should show up in the drivers information center. If you have the "newer" driver information center look for an "i" button and scroll through it until you see "oil life **%" displayed. At that point press and hold the reset button until it resets to 100%. Should take about 10 seconds of holding the button.

There should be instructions on how to reset it in the owners manual if this doesn't help. Good luck.

Posted on Oct 06, 2009

fixitriteman
  • 431 Answers

SOURCE: LOW OIL PRESSURE ON 2007 GMC SIERRA 1500. CHANGED

have it tested using a manual gage if still low then main baring ore most likely bad that would mean a over hall if is really low and bearings bad should be making rattle noise when started up first few seconds

Posted on Mar 11, 2010

Testimonial: "thanks alot.truck is not making a rattling noise.we did check it with a manual gauge.it read about 10 at idol. press. gets better as you incr speed"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset oil change light?


Make and Model: Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra
Years: 2000-01, 1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

Hope this help (remember rated and comment this help) Good luck.

May 14, 2010 | 1999 GMC Sierra

1 Answer

2004 GMC Sierra Computer reset ??


I would suggest stopping by an AutoZOne or O'Reilly's and "borrow" their Scan Tool to erase any codes.
TO reset the "Change Oil" light, turn the ignition to ON (do NOT start the car). Press the accelerator pedal all the way down (then release) to the floor 3 times in less than 5 seconds. Change Oil light should flash then go off. If not, try it again. The trick is to get this done in 5 seconds ro less.

Apr 01, 2010 | 2007 GMC Sierra Classic Denali

2 Answers

1999 GMC Sierra - oil change light stays on


Hello pkdk04.
Turn your key to the on position (don't start it) and depress the fuel pedal down 3 times to the floor within 10 seconds..
Thanks for using FixYa!

KL

Dec 15, 2009 | 1999 GMC Sierra

1 Answer

Chang oil light reset gmc diesel truck


if your truck doesnt have the driver info center, you can reset that by turning the key to run with the vehicle not running and push the gas pedal to the floor and let off 3 times but must be done fast

Oct 08, 2009 | 2005 GMC Sierra 2500HD 4WD

1 Answer

Got oil cahnged and now change oil soon light is on. How do you reset? 2007 GMC Sierra 1500


Turn the ignition on and within a few seconds slowly pump the gas pedal three times. A message displaying "oil life reset" should show up in the drivers information center. If you have the "newer" driver information center look for an "i" button and scroll through it until you see "oil life **%" displayed. At that point press and hold the reset button until it resets to 100%. Should take about 10 seconds of holding the button.

There should be instructions on how to reset it in the owners manual if this doesn't help. Good luck.

Oct 05, 2009 | 2007 GMC Sierra 1500

1 Answer

Hi, can you tell me how to reset the change engine oil light on my 2002 GMC Sierra 4X4 1500 PU. I changed the oil two weeks ago. Thanks, Gene


with key on engine off depress accel pedal 3 times within 5 secs. You may have to repeat the procedure several times for the reset procedure to complete. dont stomp on the pedal. Slowly depressing seems to work best. 

May 08, 2009 | 2002 GMC Sierra 2500HD

3 Answers

Change oil light on how do i reset after i changeded oil on 2003 gmc 6 cyl.


turn the key to the on position and press the gas pedal to the floor 6 times in rapid succession. than start the trurck without turning the key off

Apr 12, 2009 | 2003 GMC Sierra

2 Answers

01 gmc sierra how to reset change engine oil light


Turn on the ignition switch without starting the vehicle and mash the accelerator to the floor 3 times slowly and this should reset the change oil sensor.

Jan 30, 2009 | 2002 GMC Sierra 2500HD

2 Answers

2003 GMC Sierra 1500HD Panel Lights


as soon as you turn key on hit the gas pedal 3 times really fast you may need to do this a couple of times

Nov 13, 2008 | 2003 GMC Sierra 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,114 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...